RaybestosElement3 EHT™ Automotive Replacement Front Brake Pad for Selected 2013-2023 Nissan Altima, 2014-2017 Nissan Leaf (EHT1650H)

Great quality, no noise and stops the automobile as expected. Good value and easy to put on. Highly recommend.

Installed on 2004 jeep grand Cherokee with no issues. There is no noise whatsoever and it came well packaged. If you install these and they make noise, most likely your rotors are warped and they took the shape of your old brake pads OR you did not lube the caliper slide pins correctly.

Perfect Fit! No issues at all. Just remember to put your vehicle into service mode if it's a newer vehicle!

I replaced my brake pads myself yesterday on my 2013 Hyundai Sonata. So far so good. Easy installation, Quiet braking, smoother driving (far less steering wheel shake), great brake response.I'll change my rating once i break them in 3 months from now.

These brakes stopped great. They put out way less dust than the original BMW brakes. They do squeak when you break back up.

For a 2016 Honda HRV, fit like a glove, easy install, quiet, not a lot of dust, and stop like OEM.

I read the reviews & the positive feedback was the deciding factor on these brakes. I had to replace my 4Runner front brakes as I noticed longer braking from a distance & having some vibration at a complete stop. Upon further inspection the brakes on the driver side had a broken retainer clip barely holding on & causing the loose play when coming to a stop. The original brakes were almost at the end of their life as some of the brake pads had gaps in them starting to desenagrate with lots of brake dust on the brake caliper. I assume these are are organic brakes pads that produce alot of brake dust replaced by my auto mechanic two years ago. I wanted to replace my brakes with ceramic pads since they are more durable, have more stopping power, & produce less brake dust. These are cheaper than buying from a retail store & glad they came with replacement brake retainer clips & clips to hold in the brake rods, because my broke & would have to go buy them at the auto parts store. I did the replacement myself, you can learn from YouTube videos if you need help & the tools needed. Overall I am very pleased of the quality & value of the these brake pads & saved me money from having to go to a auto mechanic.

First time doing my own brakes and put them on my car today. I assume most people buying these are experienced doing their own brakes and would immediately discard instructions. It's not exactly rocket science but simple instructions or images would have been helpful for a first timer like myself. I was kinda surprised that there was no literature in the box, not even a QR code to a YouTube video or a link: just four brake pads and four pieces of hardware.That wouldn't be a big deal or a pain point if not for the following. When I opened the plastic the pads and parts were contained in, one of the metal covers for the back side of the pad was hanging out loose. Not that big a deal. I bent the tabs a little and pressed it back on but it was still sliding from side to side on the pad and came off more than once. Then another one of those covers came off of another pad just from normal handling. Again, not that big a deal, but it gave me an impression of low quality. When I tried to put the rotor back on, it seemed too snug to fit, so I used my new spreading tool to make sure the caliper piston was fully depressed and tried again. The caliper still seemed to snug to fit properly, so naturally I tried harder before giving pause to figure out what was going on. What happened was the cover of the pad on the opposite side of the rotor had partially come off again and was preventing the caliper from going back on. I removed the pad to address this and then had difficulty getting it back on because the pressure I was applying to the caliper caused the pad cover to crush the bottom clip. This made it necessary to remove the outer pad so I could bend it back, but it was difficult to get it seated properly at this point. Eventually I got it and got the pads back on and the caliper went back on easily. I realize these are rookie mistakes. However, they wouldn't have happened if not for the poor fitment of the chincy covers. Everything went smoothly with the driver's side installation.After installation, I noticed that the metal covers actually don't match the product image on the box. Because of the cheapness of the covers, I ended up being sort of skeptical about whether the pads are genuine Raybestos. Long story short is that I'm a little irritated at what seems like shoddy quality control and the problems that caused. The metal covers on the Carquest pads I removed are tight and secure. Their retention tabs are sturdy and it would take effort to pry them loose. I expect the same from Raybestos. Had they delivered in that area, the installation would have been a piece of cake and I would have been much more satisfied.

They're alright. They work as they should but I'm not a fan of the squeaking they make. It's been a few months since we installed now and they squeaking isn't going away.

Ajuste perfecto en mi Kia Forte 2018, Frenado suave y sin ruidos, 100% Recomendadas.

Perfect fit,quiet and a good product

Pads are fine, was just surprised that integrated hand brake require a twist in the piston to retract. Pads are great.

Seleccioné estas balatas por las buenas reseñas que había leído de webs en inglés. Después me pareció que el precio era sorprendentemente bajo, por comparación con su categoría. No negaré que tuve mis dudas, pero tras instalarlas, me parecieron realmente excelentes. Un rendimiento perfecto y espero una gran durabilidad, por ser de materiales mixtos.