Nooelec Dual-Band NESDR Nano 3 Premium ADS-B (978MHz UAT & 1090MHz 1090ES) Bundle for Stratux™, Avare, Foreflight, FlightAware & Other Applications. Includes 2 SDRs, 4 Antennas, 5 Adapters.

I've had my Raspberry Pi running this pair of N3 SDR radios 24x7 for over 3 years now streaming to ADSB Exchange and it's been rock solid. The antennas that come with it aren't great but very functional. I have used the N3 radios before and picked up this bundle when I was looking to get more of them. I don't know if it's worth the $95 that it's listed at currently. It was only $65 when I bought it and would have bought another bundle if it was still around that price. I'm a big fan of the NESDR Nano 3 because of it's compact size.

I now have 12 of these deployed in production, to capture anywhere from 140MHz to 900MHz, depending on location, department, ect. They have all been flawless in their quality and thermal design. They get hot, not enough to burn, but so it would be very uncomfortable to keep your hand on them for any amount of time. Every single one I've gotten has worked out of the box, and their tracking and offset has usually been within 50Hz (Yes, Hz, not kHz, not MHz) of where it's tuned too. These are very good for production applications and I highly recommend them if you need a dependable SDR. Capturing at the full 3.2MHz is again no problem at all.

Note that the heat sinks included will not fit in the Stratux case. I had to do extensive surgery to get it to fit. Otherwise all works OK. Amazon sent it out with a previously returned defective antenna, but that is not the fault of the kit or kit vendor.

I'm very impressed with these devices!! I am using them with PlanePlotter through the RTL1090 interface and they work great! Easy to set up and had them up and running in minutes. I've just ordered some LNA's and bandpass filters to see just how good they can get but even without them, I am easily tracking targets typically to around 25 nautical mile range and sometimes as far as 64. The amps and filters are an attempt to see if I can get more local targets at low altitude than I presently see but I am guessing there will come some increase in range as well.

Great radios for Stratux, works out of the box, no need to tune. Great reception with the long antenna. Runs pretty cool, not hot to the touch. The Raspberry runs at normal temp (50c).

The included y splitter and an antenna dual tuned for 978/1090 works great. Picking up planes from 45nm away, indoors, in a closet. Using the image from adsb.im these took 10 minutes to set up. I literally spent longer checking the swr of the antenna with a nanovna (I'm an absolute beginner). Don't use a pi, just buy a mini pc with windows 11 and install any Linux distro on it.

I am giving it three stars because the 978 UAT radio did not work. When I SSH into the raspberry pi and and use the tool sdr-tool.sh the 978 radio was not able to be seen. I tried 2 different USB ports and both antennas and nothing worked on that radio. The 1090 radio worked just fine and was able to be adjusted with the sdr-tool.sh and I could see different planes etc. I will update my reviews when I get my replacement order and find that everything works. Everything else in the kit was great and the fit and finish was excellent! I took the Stratux out and it connected to Foreflight and I could see different planes with the 1090 radio.

Using two of these with SDR software to receive public safety channels, decode NOAA satellite passes, and more. They seem to be slightly better than the generic RTL dongles. Very satisfied with the units themselves and the assorted antennas and connectors were a plus. Highly recommend.

Utilisation dans un Stratus Europe. Le module 1090 fonctionne, je vois les Liners quant il y en a; pour le 686, je ne sais pas car il n'y a pas de planeur à cette période.

Come da descrizione

Great for use with Stratux

Perfect fit for my stratux setup

I bought this to build my Flightware Feeder. It works really well. The device is easy to setup, follow the Linux/Ubuntu instructions from their website, just till the point rtl-sdr is installed, then switch to the Piaware installation instructions. The device does get hot, but not burning hot, doesn't melt plastic. The provided heatsink is useful. Have it running for almost two weeks now, and still doing well.