ERYONE PLA Filament 1.75mm, 3D Printer Filament PLA, Dimensional Accuracy +/-0.03mm, 1kg 1 Spool(2.2lbs), White

Another Eryone filament that hits the mark. Nice subtle blend of colours and easy printing using generic PLA settings and high speeds of around 200-300mms. This filament offers great bed adhesion and dimensional accuracy as shown with the articulated tail. Overall happy with the results and another great filament from my go-to brand!

Great finish

OK, so Ive been using this filament for a few days now and I have to say that is certainly fulfils my needs and exceeds my expectations.I had been having problems with my Creality CR-10S printer for a few weeks now and was unable to get a reliable print. This is mainly down to the settings of my printer not the filament, so as you can imagine I was reluctant to start using this as I feared I would not get a good print. However, I gave it a try and immediately noticed a difference. Stringing was reduced. However, I reduced my temp settings to 190 (The minimum this filament it claims to work well at) and voila, all stringing was gone. This is sompared to a slight stringing with my regular filament.Now, Ill be honest, I havent tried using premium filaments so I cnant compare this to the "big boys" however, this has performed really well for me. What you have to remember is that if you get a bad print it could be the filament but equally it could be any one of lots of other settings such as bed leveling, temp, flow rate, o, the list goes on. However, this filament seems to be quite forgiving.In addition, because they are an Amazon seller I can have this delivered to a locker close to my place of work, so I dont have to worry all day if a courier has thrown my package over the fence, not been able to deliver or not even bothered trying.So, my thoughts before I tried this?Well, at £14 a 1kg roll compared to £20 for my regular brand (Which in itself is quite cheap) I thought I would carry on using it as long as it worked). I mean, £6 a roll is a MASSIVE saving, in fact its a case of buy 4 get one free....effectively.However, I will not be continuing to buy this because of the price. I will continue to buy this because its a good quality filament.Buy it for the price, buy it for the quality, makes no difference.I spoke to Eryone before I bought this and asked them a few question and Ill summarise the answers.Why is this so cheap?Well, its cheap because Erone make and sell their own filaments. This means that there is no reseller taking their cut. This means that the savings can be passed on to you the consumer.You only have two colours. Are there plans for more?The reason they only have two colours is because they are a newish company. They have started off with the most sought after colours and in the future they plan to introduce more colours. I have suggested they introduce purple as I like that colour LOLDo you have a facility to give away free samples so people can test the product or colour?After explaining that the supplier I regularly use gives away a 10M free sample with every spool sent out in a colour of your choice Eryone thought the idea was nice and they would certainly look into the idea themselves. Now, at the price they are selling their filaments Im not sure if they would be able afford to be able to do that.CONCLUSIONI am more than happy to make Eryone my number one supplier for filaments. However, as they only supply black and white at the moment Ill only be able to get that from them. Ill continue to use my previous supplier for coloured filament but for blacks and whites these are now my number one "Go-To" suppliers.

Grey seems to be the strongest PLA colour, from tests performed by others. I wanted a darker grey colour so I thought I'd try this at a great price.The product arrives sealed in a bag with desiccant. I printed a temperature test tower, covering 190 - 225°C in 5 degree increments. The tower on the left was printed straight away after opening the sealed bag.I dried the filament for 10 hours at 45°C and printed another temperature tower. No comparison! There was no stringing even at 225°C. There was very occasional 'spiders webs' which are not an issue.This temperature tower is printed with a 0.6mm nozzle and the towers have only one wall, so testing the layer adhesion (crudely) by trying to snap the tower is easy. The layer adhesion on this filament was excellent. I had a fad on matte filament but I've found it to be much more brittle with poor layer adhesion, which is fine for parts not requiring mechanical strength.I was sceptical about this filament, as there were some reviews highlighting issues including layer adhesion. If you have a dryer, initial impressions suggest this will be a good performer.

I wanted to try out the china red for this hueforge and I am not disappointedThe china red blends beautiful with the atmospheric volumes of light within the hueforge. This is an instant fave from eryone for me:edit, added night time view of the beautiful shades from the light going through the china red in the lamp

Excellent

When I pierced the plastic wrap this came in there was a sound of escaping gas. That's weird. Then when I did an overnight print lasting 12 hours the print was basically brittle and could easily be crushed. The filament was full of moisture out of the bag so useless. I then ordered a Sunlu filament drier and put the filament in for 8 hours. Still a failed print. All my other filaments are fine. Won't be buying again. Useless.

Made some really beautiful roses with this filament and will def buy again. Printed really nicely .

Print Nice and no problems with it 😊

Filamento di alta qualità per stampe eccellenti e affidabili"Ho acquistato il filamento ERYONE PLA da 1,75 mm per diversi progetti di stampa 3D e sono rimasto molto soddisfatto dei risultati. Se stai cercando un filamento che offre ottime prestazioni, facilità d'uso e un buon rapporto qualità-prezzo, questo prodotto è una scelta ideale.Caratteristiche apprezzate:Precisione dimensionale: Il filamento ha una tolleranza di diametro di +/- 0,03 mm, il che garantisce un flusso costante durante la stampa. Questo si traduce in meno problemi di estrusione e una qualità di stampa più uniforme.Facilità di stampa: Ho trovato questo PLA molto facile da lavorare, anche senza un piatto riscaldato. L'adesione al piano di stampa è ottima, riducendo al minimo il rischio di deformazioni o distacchi durante la stampa.Qualità delle stampe: Le superfici delle mie stampe risultano lisce e con dettagli ben definiti. Il filamento si fonde in modo uniforme, permettendo di realizzare modelli complessi senza problemi.Varietà di colori: ERYONE offre una vasta gamma di colori vivaci e interessanti. Personalmente, ho provato il colore bianco e il risultato è stato un bianco puro, perfetto per successivi processi di verniciatura o finitura.Difetti riscontrati:Confezionamento migliorabile: Anche se il filamento arriva sigillato e con un sacchetto disidratante, ho notato che la bobina non ha un foro per bloccare l'estremità del filamento quando non in uso. Questo può causare srotolamenti accidentali se non si presta attenzione. Ho risolto utilizzando un fermaglio per tenere fermo il filo.Sensibilità all'umidità: come molti filamenti PLA, è sensibile all'umidità ambientale. Consiglio di conservare la bobina in un contenitore ermetico o utilizzare sacchetti con zip e bustina di gel di silice per mantenerlo asciutto quando non in uso.Consigli personali:Impostazioni di stampa ottimali: Ho ottenuto i migliori risultati stampando a una temperatura dell'estruso tra 200°C e 210°C e con una velocità di stampa di 60 mm/s. Ovviamente, potrebbe essere necessario adattare queste impostazioni in base alla tua stampante.Test iniziale: Se è la prima volta che utilizza questo filamento, ti consiglio di stampare un piccolo modello di prova per calibrare le impostazioni e assicurarti che tutto funzioni correttamente.Conclusioni:Il Filamento ERYONE PLA 1,75 mm è un prodotto di qualità che offre risultati affidabili e di alto livello. È adatto sia per principianti che per utenti esperti che cercano un filamento facile da usare e che garantisce stampe di qualità. Nonostante qualche piccolo difetto nel confezionamento, i vantaggi superano di gran lunga gli svantaggi.Spero che questa recensione ti sia utile nella tua decisione d'acquisto.

Für ein besonderes Lampenprojekt war ich auf der Suche nach einem möglichst dunklem Filament.Beim Suchen bin ich dann auf das Eryone Jet-Black (Pechschwarz) gestoßen.Das Filament wird auf einer Pappspule geliefert und hat ca. 1030g an Filament drauf.Das Filament ist gut gewickelt, es gab keine Probleme beim Drucken.Der Durchmesser lag durchgängig im soll.Beim Drucken kam es zu keinem Warping oder Strinning (vorausgesetzt man nutzt die richtigen Druckeinstellungen).Gedruckt habe ich die "Affen-Lampe" mit meinem Bambulab P1S mit folgenden Settings:Layerhigh: 0.16mmTemperatur Nozzle: 220°CTemperatur Bett: 55°CWandlinien: 3Geschwindigkeit Außenwand: 90mm/sGeschwindigkeit Rest: 220mm/sDas Eryone Jet Black ist zwar ein klein wenig dunkler als andere Schwarztöne aber wenn man nicht den direkten Vergleich hat fällt es einem nicht wirklich auf.

The media could not be loaded. Fan d'impression 3D, je continue d'explorer cet univers.J'ai donc choisi de tester une autre marque dans le but de me faire mon propre comparatif.J'ai donc choisi d'éprouver le filament PLA-Green_Army d'ERYONE.Comme ses confrères l'emballage reste simple en carton recyclé ainsi que le touret de la bobine d'1Kg.Elle est livrée sous vide avec un sachet pour absorber l'humidité.Les informations techniques fournies sur la bobine et le site ont été largement suffisant pour effectuer mes réglages dans mon slicer QIDI (Prusa)Je n'ai pas rencontré d'anomalie avec la bobine.J'ai obtenu des résultats très propre et d'une grande qualité.Je sais que sur la plus petite des pièces, je devrais effectuer un ponçage pour obtenir une surface lisse et bombée, mais cela est normale.Pas de warping sur des impressions relativement grande, haute pour des temps d'impression de 1h,7h30,10h30h et 15h pour certaines avec des hauteurs de couches de 0,1 ou 0,2mm.Le vert armé donne un très beau rendu, dommage que je doive peindre par au-dessus, mais pour un aspect militaire il pourrait très bien faire l'affaire.J'espère que mes photos et ma vidéo parlerons d'elles mêmes.J'imprime avec une QIDI X-Plus 3Projet : imprimer des éléments pour réaliser un immeuble pour une table de jeu.Aucun problème pour intégrer la bobine et le filament dans l'extruder.Logiciel: QIDI Slicer (même noyau que Prusa Slicer)=> Création d'un profil 50mm/s.=> Création d'un profil 100mm/s pour Hauteur de couche en 0,1mm.=> Création d'un profil 100mm/s pour Hauteur de couche en 0,2mm.Test d'impression d'une tour de température.OK pour 205°C pour la 1ère couche et 200°C pour la suite.Vitesse des ventilateurs réduite à 20%------------------------PARAMÈTRES D'IMPRESSION 3D------------------------BUSE de 0.43 périmètres - 4 Couches du Haut - 3 Couche du Bas - 15% remplissagePlateau à 65° et Chaleur de la buse à 200°.Print Settings Printer brand: QIDI TECH Printer: QIDI X-PLUS3 Rafts: No Brims: Oui Supports: Yes (pour la qualité) Resolution: 0.20 Infill: 15% Filament brand: ERYONE Filament color: VERT ARMY Filament material: PLA Type Remplissage: Gyroïde / RectiligneRésultat:Le positif :Hyper content du résultat obtenu.D'ailleurs, j'ai un ami qui m'a passé son filament PLA-Blanc d'ERYONE pour avoir un comparatif.Rien à dire avec les mêmes réglages.Le négatif :La vitesse d'impression par rapport à mon imprimante.Pour conclure :Je préfère réussir mon impression avec un très bon PLA à vitesse réduite que de ne rien produire et de gaspiller le filament et son argent.Ça ne veut pas dire que je ne vais pas me laisser tenter par du High Speed PLA :PDonc au final, je sais que je n'hésiterai pas pour une nouvelle bobine.