ASUS ZenWiFi BT6 Tri-Band WiFi 7 Mesh, 9.4 Gbps, 7600 sq.ft. (3pk), 2.5G WAN Port, Security and Parental Controls Included, Smart Home Master SSIDs, 4G & 5G Mobile Tethering- BT6 (W-3-PK)

Update: 3-28-2020. Still having issues with the primary router always connecting with the 5 g network, particularly when it is in the ax mode. Supposedly this system is backward compatible with other adapters but by switching it off the ax mode and then back on a few minutes later then it seems work ok. Shouldn't have to do this Asus. Try to fix it, I can't be the only one who has this issue. Devices generally will connect to the node without any issues. Update: 3-8-2020 I'm finding that some of devices will not connect to the 5 G network when the system is in ax mode. Even if I'm but 5 ft. away. Switch the ax mode off and it will connect both the 2.4 and 5 networks. Go figure. Occasionally I have to switch the ax mode back on to get some other device to connect properly. I often take the device into another room some 15ft or more away and it will connect with the 5G without any issues.??? Update: 3-2-2020 My Blue Cave node was inconsistent on wifi but excellent with the ethernet so I tried a RT-AC68A as a node and it works great. Both the ethernet and the wifi provide excellent speeds in the basement some 25 feet away. I don't plan on sending it back since I'm very happy with it so far. Have had to make a few adjustments here and there because not all digital devices are "equal". If you don't mind paying up for a system it is pretty hard to beat for setup and performance. One thing to add: when I set up the node I used an ethernet cable from the main router lan to the AC68A wan. For some reason it would not locate it wirelessly. Update: 2-24-2020 Went into the wireless in the menu and enabled WIFI Agile Multiband for both the 2.4 and 5g networks. (I disabled the smart connect right out of the box.) It will ask you to change the Protected management Frames also. Did so not knowing what the outcome might be but these changes seemed to help with the issue of the mesh switching between the nodes and the primary router. Also, my phones would not hook up to the primary router sitting 5 ft. away but since the afore mentioned changes that issue is gone and the speeds have been excellent. I added a star to my orignal review since the system is working much better. I sure as hell would like a manual to look at rather than just a quick setup document. If someone out there has some ideas or additional adjustments that can be made I'm all ears. FIRST REVIEW: This is an early impression of my experience so far. 2-pak setup was very easy and straight forward. Had to reset once but couldn't find the reset button until I looked on the very bottom of the router. By the way the wps button is there also. I'm paying for 200 mgb and will get 200 to 260 with my desktop 7 ft away. My motorola z3 play generally gets 140 to 170 depending on where I am. I was getting 160 to 200 in the basement 25 ft. away on a desktop. The all those scores are on wifi. I setup an additional Blue Cave node in the basement (which was another story) and connected to two different desktops with ethernet cables. At times they are ripping along at 230 to 260 or may drop off to 80 to 90 for no apparent reason. I disconnected the cables reconnected and the speeds went up again???? (This issue has vanished after making the above mentioned changes). The app will sometimes show the blue cave is offline yet it is working. I have some similar questions as a few others have had about bothersome issues that have arisen. Will address these later. I finally disabled the ax mode for 2.4 and 5g and it seemed to put some of these issues to rest for awhile. I have had ASUS routers for years and love them along with the menu. These two have me considering going back to my older routers because they were more reliable. I'm not a computer guru but I can handle most of the basic computer issues and projects. We don't buy the hardware to continually reboot, reconnect, and try work arounds to make the systems work. Update: 9-22-2020 Additional thoughts on the zenwifi routers. I've found that I need to keep it in the non-AX mode so all of my cameras, wall plugs, etc will remain connected all of the time. ALSO, THE RESET AND WPS BUTTONS ARE ON THE BOTTOM OF THE ROUTER. Nothing in the instructions that I could see regarding their location so if you are looking for them check the bottom. The wifi range is excellent; the speed is excellent; and the app works very well setting the routers up. I'm paying for 200mbs but I get 260+ download with wifi in the same room and 200+ downstairs in the basement. One additional point: Since the recent updates adding my Blue Cave router to the mesh was much easier than when I first started using the zenwifi XT8 mesh system.

Update: I bought an AX92U to see if I can get some speed upgrade to the slower spots of the house, especially the office which hides behind 2 corners. It went from 80 mbps to 120mbps. I tried wired backhaul, but not helping much, until I turn 5GHz-2 as dedicated backhaul off and unhide the SSID with name and password. Whah! The office is now over 400mbps both up/down and everywhere inside the house! More update: Found it not compatible with different AiMesh router. Tried to use the ethernet to connect the AX92U to free up the 5Ghz-2 band. But as soon as I plugged the network cable into the 92U, it lost connection, unplugged the 92U, and the internet was very slow. Checked the app, it said the uplink type is 2.4GHz! Reboot, reset all routers, turn on/off dedicated backhaul, nothing helped. So basically the two 5Ghz bands disappeared! Luckily, my backordered AX11000 showed up, so my internet is up and running while I return the ZenWifi. I am WFH, so a good internet is very important and not going to bother to figure out what went wrong. However, I do suspect the hardware may had problem since they were bought from the warehouse as like new. Note that I have a very sophisticated smart home setup with over 50 devices connected from doorbell to fountain pump, and many smart TVs, I so I am happy to get 400mb out of 1Gb internet on any PC or iPad with no streaming going, or 120mb with 1 or 2 streaming video on. But I am still researching on possible improment using 12 stream AX router. I had Eero for about a year or so, although it had been working fine, but I had to use 5 of them to cover a two story home with yards, it doesn’t go through walls well enough. Also being a gadget guy all my life, I think it is time to upgrade to an AX mesh network to validate if it really can cover more grounds with higher speed. Been on Amazon since day one writing/reading reviews, I can say there is no perfect product in the world, so I rarely buy stuffs based on reviews, instead, buy them for the looks or functions they provide. In this case the Asus XT8 got me for its speed and price, not for the bulky look. Setup - easy enough, just need an IOS or Android phone or pad with bluetooth, download the app and follow the instruction. Make sure the two routers are fully linked before running the app, or you will see 2 mesh devices and setup will fail. Once setup is completed, move the node router to where you think it should cover the other half of the area. This involves a little guesswork, but surprisingly easy for me, since the signal is strong even where I left the node at the farthest corner downstairs. You can tell if the link between the two routers are strong if the led is solid white. If yellow or red, then move it around. Connection speed - For my 1gb internet connection, ipad was getting 200/250 up/down on the Eero, now it is 350/400. Even in the backyard, I could get 170/200, with just 2 routers. Coverage - I had not found a dead spot yet. Inside or outside. Although speed may vary, the lowest one been the office at the very corner of the house, on the PC that is 13 years old. Compatibility - with same SSID setting and let the router handle the bandwidth, all smart home devices are working. About the only device not working was the 13 year-old PC the no longer has a updated NIC driver, I solved it using an USB 11ac dongle with updated driver. I still need to figure out how to hang the main router upstairs on the wall, but other than that, I am happy withe the ASUS XT8, the simple setup and management using phone app, and strong signal for internet with just 2 nodes. It is something worth looking at for WFH now and the future.

Muy buen router cumple con su propósito y excelente el wifi 6 recomendado para casas grandes y con muchos aparatos conectados

Upload compared to my Eero 6+ was horrible. Download was marginally better. On paper this is a good gigabyte system but in reality it had lesser range. Ended up returning it. App and settings are great though. Maybe only the upper end units like the BQ16 actually perform like they should.

The best mesh system I’ve used so far.

Ya habia probado varios aparatos para poder sostener e "incrementar" la velocidad de mi WIFI en toda la casa, estos aparatos en verdad impresionan, en cualquier punto de mi casa de 2 pisos, la señal llega y alcanza casi lo mismo que cuando estas a lado del modem, mi caso tengo 500 MB, hemos logrado en horarios nocturnos alcanzar 800 MB de velocidad en el segundo piso, es increible el aparato en general extraordinario, durante el dia siempre por arriba de los 300 MB, consideren claramente que tengan un plan de internet que les brinde esta capacidad, hoy dia ya no es tan caro. :)

Not working, support not helping, worst company ever.