2 inch 5x5 Hubcentric Wheel Spacers for 2018-2025 Wrangler JL/JLU, 2019-2025 Gladiator JT, 5x127mm Forged Wheel Spacer with 14x1.5 Studs & 71.5mm for 2011-2025 Grand Cherokee WK2 Durango

Fast shipping easy install perfect fit on my 24 wrangler jlu...very pleased

The spacer on the left had studs that failed. This was not a product defect, but a missed step in the instructions. there is the possibility/probability that the studs from the vehicle will stick out from the spacer and contact the wheel before the wheel contacts the spacer face. If this happens, the studs will fail. If you look at the spacer on the right, the face have contact indications on it and the studs did not fail. It would be best if the vehicle studs did not stick out past the spacer face. On my wheels, the difference between the front and rear was the rear was sticking out 1/16th inch more than the front. The rear failed and the front didn't. I am seeing pictures of other failures with no wear marks on the face of the spacers. This isn't a quality issue, it's an installation issue.

Arrived early and were a breeze to put on.Gave my tires the flare I was looking for.

Work well to widen stance and make clearance for wider tires

Dangerous low quality garbage. DO NOT BUY! After only a couple of weeks I was simply at a stop sign. I moved forward normally without hitting the gas, I didn’t hit a bump or pothole, nothing of the sort. A few feet from the stop sign, the right rear of my Jeep dropped and I watched my rear passenger side wheel pass me by and roll down a field. All the lugs just sheared off. If that had happened on the highway at higher speed I can only imagine how catastrophic that would have been. When the wheel broke off because of the failed spacer, it irreparably bent the rim, broke the fender off and my rotor was dragged for several feet. It cost over $50 just to replace the lug nuts that flew off. I was only able to find one and because it had the broken lug in it, it was unusable. The rim will cost several hundred dollars more to replace. What could have easily happened would have cost me a lot more than money. Of course I decided to remove the other spacers and found another already had 2 broken lugs on it! These are dangerous, they’re garbage and will probably end up costing you far too much in the end.

Well made and fits perfectly. I think 1.5" spacers are the perfect spacer size for stock the Willys Jeep. Just a bit wider than the fenders.

These seem to be fine wheel spacers. But, on my 2020 Jeep I hade to grid down the studs on each HUB so the they were not sticking out above the spacers. Once I did that they fit perfectly. Check yours and make sure they’re not sticking out above the spacers so that the wheel can mate flush to the spacer.

Worked well, installed being sure that the surfaced lined up and were flat. Was a surprisingly easy install and I didn't have to go buy lock tight since it came with the spacers!I was careful to follow the directions including the torque specs (on the description page, it wasn't in the box). Really happy with the results!