Safety Energy-saving Heater Mini Portable Room Office Desktop Electric Fan Heater Air Warmer Black

Over all very nice little heater. I've run it for 5 hours straight and had no issues. I opened it up to see if there were any safety features and it does have a thermal switch in it. So it won't over heat and cause a fire! Which Is good in an office application. It does not have a tip over switch but at this price I doubt anything will. In my case I will actually be using this for a project. So for me less is actually more. For the average user this will be a nice little desk heater for your hands. Keep in mind this is not ul listed. However the over all quality of the internal components doesn't leave me with any concerns. If you are using it for a 3d printer enclosure heater then it will with out a doubt be a good choice. Something to note. The cord has a straight connector on the end of it not a 90°. Not a huge deal but if you are planning on using this for a project just keep that in mind.

This heater works. It's great for low energy, high efficiency applications like camping or used in a car instead of a cars heater.It doesn't have auto shut off tip over protection which I personally prefer. And it's so compact. So east of carry.The fan is very weak though so it doesn't push warm air out very. You need to be within a foot of it to feel the heat.

I used this as the heater for a hermit crab enclosure. I had it hooked up to a thermostat that kept the tank at 80F. After 11 months the fan stopped spinning. Not bad, not great. It does work.

I only had this heater for a little while. I decided to order another one for my bathroom. I keep it next to my bed. My hamster liked it as well when he used it next to his cage. He did not get too hot. Evan when I have my apartment heater on. I still have spaces that get cold. It’s been a cold winter so far. So great little heater and it does work but I will update if it stops working after a while. I will probably be coming back for more if available thank you.:)

The fan just stopped after 16 hours of run time. We used these mini heaters on our desks to help on the cold mornings to keep your mouse hand warm. They are plugged into a power strip that monitors run times. This morning after about 3 minutes of trying to warm up my hand, the fan just stopped. I am glad I was right there because the heating element stayed on and got extremely hot in seconds. Before I could turn it off it became so hot I could barely touch it. It is in the trash. We bought 2, I will place the other in the trash as well. They are dangerous.

I live in New England and bought this Feb, 2020 as my home office is in my basement and it gets cold down there during the winter. My use case for this little heater was to warm my hands while typing, similar to what a few others have purchased this for on here as well. I only run it for maybe and hour or two a day as it does get quite hot and my keyboard space is minimal so I don't want to melt my hands off. The hot air doesn't disperse too far away from the unit to warm the surroundings, rather it just intensely heats items within about a foot of it's front radiator outlet. I just turn it on for about 10 minutes, turn it off for an hour and repeat. Once April came I didn't use it for months until around late November/early December 2020. That is, until yesterday, Jan 19, 2021, when I heard the fan wind down and that was it. It appears to have died on me.After unplugging it and checking it out visually and with a can of compressed air to make sure it wasn't a power issue or something got in there and seized the fan (dust/dirt/etc.) I noticed that the heating element still works, but it just start baking the unit as the fan is what died and now the heat has no way to get extracted (pretty dangerous if someone wasn't present to notice this, in my opinion, as it has no auto shut off).I checked my "warranty" and saw I had 180 Days that was long past so I popped the grille off the fan and gave it a spin. It does indeed spin freely and I could detect the heating element warming up instantly, per usual. My manual spin actually brought the fan back to life, but at a fraction of the RPMs it was working at earlier in the day, and not nearly enough to push the generating heat out of the little unit.I may tinker with it later as it really does appear that the issue is just a cheap fan motor or some related part that died out, but it's a shame as the unit was exactly what I was looking for, did get nice and hot, and wasn't noisy or distracting while I was working or on calls.For the price and purpose I'd easily give it 5 Stars, but having the fan motor die, and thus the unit's usefulness negated and liability increased, after only have a few dozen hours under its belt is very disappointing.If the Manufacturer ever reads this I'd be more than happy to exchange it for another/newer model and re-review it if at all possible. Like I said, it was just what I needed while it lasted; which wasn't that long at all, unfortunately.

I bought this because I needed something small that would fit in my case for my 3D printer. I keep my apartment set to Antarctica during the summer and I have a lower end printer and it needs a little help heating up. I can either spend 30 minutes to an hour starting my printer, letting it error out because it can't hold temp, rinse and repeat... Or let this little baby run for 10 mins and it's perfect temp in my enclosure and I can turn it off and it holds the perfect temp while the printer is running. Great little device if you are having difficulties keeping temp on your beginner level 3D printer.

I use this for my car Dashboard (Velcro'd down) and I pair it with a Westinghouse iGen200s power bank. Tested twice since we had 30 F Degree nights and it defrosted my windows fine. I plugged it in and turned it on and in 20 minutes my car was defrosted without having to leave my car running. The wattage peaks at 200w then lowers to 130w which is perfect for my smaller power bank and allows it to run for 1 hour and 15 mins if needed. I didn't even need to turn on my car's heater for both mornings.

me gusto mucho, ya mantengo mis pies calentitos en la oficina, su tamaño es pequeño así que para mis pies esta genial, muy practico

Fácil de usar ideal para espacios pequeños,lo puedes tener guardado en un cajón sin problema, muy fácil de usar

Buen producto, generador de calor personal, aunque nivel de intensidad bajo, buen producto, buena calidad, portabilidad, pero... la radiacion de calor es relativamente suave.

Lanza poco calor y se descompone a los 3 meses de uso.

Si todavía pudiera lo devolvería, considero que no lo utilice mucho.