Loctite PL Premium Polyurethane Construction Adhesive, 10 fl oz Cartridge, 6 Pack - Versatile Construction Glue for Wood, Concrete, Stone, Metal & More

My application was to bond a plastic access panel to drywall and it worked perfectly - exactly as advertised. Pop the cartridge into a caulking gun and it's ready for use. One word of caution would be to apply first to the surface you are trying to bond (in my case the plastic access panel) and let it set up for about 20 min before applying to the surface as the directions indicate. This way it almost immediately bonds and holds in place as it will dry quickly enough so the item will not move around. It takes 24 hours to fully dry, but that time is necessary in case you are trying to do something that would disturb the item before set-up is complete. It's fairly easy to use but can be a bit messy if you're not careful and mostly because at least in my case the glue kept coming out of nozzle to quickly but that was probably more an issue with the caulking gun. Also wear gloves so you don't get it on your fingers, which I failed to do - it will clean off the hands, but not easily. The only other issue is it is pretty much a one-use product, since it will dry solidly in the nozzle blocking future use unless I figure a way to clear the blockage. If you're looking for a bonding glue that will work on virtually anything, that is easy to use and a good value, this may be what you've been looking for.

Super strong fixed a wood transition on problem. Easy to use, sealed the gap

If you apply and let it set for 2 hours (it recommends 24) then no matter how hard you pull, it's not coming off. This is because it comes out as a liquid, gets into all the cracks, then drys into a rubbery-like solid. This creates unbeatable cohesions. Excellent for concrete jobs.

I'm no expert on construction adhesives, but this seems to work great on pavers (paving stones). You do need a cartridge gun to use the cartridge type (duh), those (guns) are cheap and really, every homeowner should have one. This stuff appears to work well on pavers. It's reasonably priced. I can't speak to how well it lasts in terms of years or how it compares to others. The Loctite brand is a (at this time) a strong brand so I believe in the integrity of the product based on the company. If you live where it gets very cold/hot (e.g. midwest USA) you may want to just use a blob on a stone because of the thermal issues around water expanding when it freezes. Tips ---- -Be sure to cut a large enough amount off the tip, this stuff is pretty thick. You may need to experiment to see what you like, start small. -Don't assume that it will keep fresh in the tube. -Definitely use a cartridge gun with this, you can't get it out of a cartridge without that -I have not tried the smaller squeeze tube. It is available and may be more suitable for smaller DIY jobs. -Put a little light lubricant on your cartridge gun and it will be easier to use and give you more control over the adhesive. Just a follow up after using this for a while. So far it seems rather awesome. I'm doing many small DIY type yard projects with paving stones from my local big box store and this adhesive seems to work quite well. I make sure the stones are clean and dry, I apply liberally using a caulking gun and the stones seem to be quite strongly bonded. I was able to put the adhesive on 4 sides of the stones (bricks) and they stacked to make a very strong (albeit small) structure. I have also glued them end to end (essentially making a brick 2x4) and that worked well too.

Good and reliable. So far

Strong bond on the tile and marble in my bathroom, it worked great

Works great

First, I would like to say that I am so mad at myself for not taking before and after pictures!!! I bought a new house, and the previous owners screwed me over. I will take the blame because I should've done a THOROUGH CHECK on the house. They carefully placed everything and made "quick fixes" so that I wouldn't notice just how damaged the house was. Anywho, my hardwood floors were moving and my stair panels were falling off the 1st day in my new house. I bought this because I didn't want to pay thousands of dollars to get the issues fixed. This item was easy to use and the directions are very simple. It takes about 30 minutes to dry and completely harden and my stairs are now sturdy. I had my kids do the kid proof test and run up and down the stairs, drag their toys, jump skip steps, etc. Those panels aren't going anywhere. This is a no mess product, so you do not have to worry about whatever your gluing back together looking terrible; it has a neat and clean appearance. The product is thick so use one of those gun tool thingy majiggers. And make sure that you cover when finished because the product will get hard which is not easy to remove.

Good

I put my rubber garage door floor seal over epoxy surface, work excellently

Worked great. Doesn’t dry fast so I could adjust and clean up without rushing. I could even reuse it after opening. I even was able to cut open the tube after 2 weeks to use remnants for an emergency repair. Wasn’t dry even after the tube was cut open (two times for different projects). Resealed by inserting a screw and wrapping with plastic.

ثباته قوي جداً

Good