⚙️ Power your oil change game—fast, clean, and professional every time!
The Harpy Eagle Electric Oil Change Extractor Pump is a 100W, metal-built rotary motor pump designed for quick and efficient oil extraction at up to 1 gallon per minute. Featuring 4-foot hoses, a 59-inch power cable, and a spill-preventing design, it’s perfect for cars, trucks, boats, motorcycles, and more. Packaged in a compact case with a certified mechanic’s manual, it’s the ultimate portable solution for professional-grade oil changes.
Manufacturer | Harpy Eagle |
Brand | Harpy Eagle |
Model | Case Pump |
Item Weight | 4.33 pounds |
Product Dimensions | 6.3 x 3.54 x 3.27 inches |
Item model number | HE-001 |
Manufacturer Part Number | HE-001 |
Special Features | engine oil extractor, car oil suction pump, boat oil change pump, fluid extractor automotive, oil transfer pump |
Lift Type | Electric |
B**.
Didn't get the last quart of oil out of my Subaru 2.5L engine
I have only used the extractor pump once so far, but it operated as intended after sucking on the discharge tubing to prime the pump. I believe it left about one quart in my Subaru crankcase because of the configuration and location of the dipstick tube, but that obviously isn't the fault of the extractor pump. It was relatively quiet when running and discharged a good stream of oil, taking maybe 3 or 4 minutes to extract about a gallon of oil. The only way to improve the amount of oil removed from my engine would be to redesign the oil pan, obviously something that isn't worth the effort. Good pump!
T**R
This pump is a life saver!
I recently tried to change the oil on my Mini cooper, only to find my oil drain plug completely stripped and rounded off. I was unable to remove the plug on my own. I had just purchased a premium filter, and oil. I did not want to have to bring it to a mechanic to have the drain plug replaced, knowing they would probably have to change the oil and almost certainly would not use my provided oil and filter. I decided instead to leave the oil plug in. I purchased this pump to remove the old oil. It was surprisingly easy and efficient to use. I did not experience any leakage. It was relatively speedy, only taking about 8 minutes to completely drain the oil pan. The pump seems quite sturdy and made to last. It is all metal so the pump has enough heft to keep it steady while it does the work for you. I did listen to other reviewers and used a heat gun to straighten the drain tube's. The included stoppers are perfect. The case however, is almost useless once you straighten the tube's. All in all this is a great pump and a great value! I highly recommend this as a buy!
P**F
Not worth the money.
Failed all too soon. Spent more thinking I might get a more reliable pump. It turned out to be a waste of time and money. It quit working the first time I used it.I ended up hand pumping the oil.A simple hand pump is a much better investment. Bonus you will be able to complete the job.
S**E
Excellent pump quiet super powerful and field serviceable
The media could not be loaded. This is an excellent pump. Super powerful. I own a marine repair shop and we deal with oil almost daily. I have used vacuum pumps in the past and this is a total game changer.There are features about this pump that set it apart from many cheaper options and is totally worth the extra money. There are also some definitive improvements they can make and i will list them which is why I snipped off a star. I have not been endorsed or received any benefit from this review. Its simply my hands on review and I own Socal Marine LLC.Firstly the kit does come with a dipstick insert tube - its very thin and the idea is to slip this down the dipstick tube to extract oil. This will drastically slow the process esp when the oil is cold only because the tube ID is so thin- however by drastic i mean it still pumps 10 times quicker than my old vacuum model!The speed is determnined by the INLET HOSE SIZE! I removed the quickconnect fititng and screwed in a 3/8 barb adapter, ground down the sharp barb edges for easy hose removal and used a firm wall 3/8 oil line (yes those soft clear tubes WILL compress - do not use these/soft hose on the in side!).Well heck this thing pumped about a gallon a minute of a mix of gear and engine oil-Now for the fun part - this pump is totally field repairable, what I mean is if you hit a jam like i did sucking up something other than oil, just pop off the top cover, remove gears and pin (it falls out easy), clean and re-assemble and you are off to the races again. Remember the small gear goes down groove first to seat over the small pin.This has a steel gear much like a chevy oil pump and it will last FOREVER unless you pump sand with it. It has very tight tolerances and works incredibly well.One thing i noticed after removing top cap to clear an obstruction (looked like teflon tape got in there), was I had to leave the 3 screws slightly loose and let it run slowly tightening the screws - if you reassemble and just tighten the screws you will likely just lock the gear- so tighten the screws slowly while the pump is running and untighten if it jams up then gently continue snugging them till it stays running with all 3 snug.It also primed INSTANTLY from a dead vertical drop if 3 feet- and instantly spurted oil out the clear tube which threw oil everywhere. The stupid plastic clip they provide doesnt even fit the tube in the kit!No reverse option but I might swap out the switch since its a DC motor, and also no strainer like in other kits.Also - the case is WAY too tight, once you have added 5/16 and 3/8 lines, its impossible to close. Also - the clip sucks and there are no p;ugs for the clear tube far as i can tell.Overall I am keeping this because i dont like returning used items based on small dislikes- everyone is trying to get by here and I dont need to return funtioning equipment putting a jam in their progress.Pros:Pumps like a monster - 1 gal / minute with a 3/8 inletVery power pumpPump is QUIET!Nice length of wires and decent clipsCase is niceStandard NPT threads for custom hose/fitting optionsField servicable - easy to remove/reassemble and continue onCons:No inlet screen filterCase is too smallNo reverse optionBlue clip does not fit outlet hose at all spraying oil everywhereI am very happy and hope this pump lasts a while.
D**I
Game changer for DIY oil changes
This little pump makes oil changes so much easier. I don’t have to crawl under the car or make a mess, just stick the tube in and pump it out from the top. Super simple to use and way more convenient than driving to an oil change shop and waiting around. Honestly, it’s a money-saving machine. I can now do oil changes at home, on my schedule. Highly recommend for anyone who wants to save time and cash.
R**
Works great, no mess
I bought it to change oil in Yamaha golf cart. The pump evacuated the oil in a few minutes. It worked great with no leaks or mess. Glad I bought this one.
D**N
Great Pump for Oil Changes
This pump saved me hours of hand pumping out the oil from the engine in the boat. It made the oil change as simple as 1,2,3 It connects to the battery in the boat and is easy to operate and clean up afterwords.
Trustpilot
1 week ago
1 month ago