Plasma Cutter TIG Welder (Pulse) Stick Welder - CT418 3 in 1 Combo Welding Machine, 180A Pulse TIG/Arc Welding, 40A Plasma Cutting, 110/220V Dual Voltage Digital Display Portable Welder Machine

I've been using this machine for about three days now. I have used the plasma cutting function a lot.I tested the tig function, but I don't have a gas bottle, so this was very brief, just to see if the machine would strike an arc - which it did.I have not tried stick welding, I have another machine for that. But I have no doubt it would perform. The amperage is likely a lot higher though. It may stumble, pop a breaker, or underperform.In the lower power settings it does everything I need it to do, and it does it plenty well.I have only run this machine on 110-120v.I use about 30psi for thin sheet metal. 45psi for 1/8inch. I have not cut anything thicker.I do advise you have a large air compressor. I am using two compressors from scrap mini-fridges and an air tank. I get about 15 seconds of cutting for one minute of recharge. This is totally fine for my needs. But if you want longer run times, you will need a large air compressor, and you will put more heat into the machine. Ultimately, heat is the killer of all electronics. It's a give and take relationship. Take more, you get less.For the weekend warrior, this is great! If you need it for full time work, you literally have not gotten to this point of the review. It is not a commercial machine. Don't come in with unreasonable expectations.

The plasma cutter sucks. Will not cut the way it said to. It struggles to cut aluminum the thickness of a pop can. tig welder may tack a pop can if it's turned all the way up that's if it doesn't trip the breaker. Not what it's advertised as. junk don't waste your money

super short leads (like 3 ft), and you will need to buy some large gauge electrical line to wire the AC adapter yourself to fit whatever type of plug you want to plug this thing into. But for the price, this is a great product. I love how light weight it is.

Very happy with my purchase. Have use a few times. Repaired the deck on my old mower perfectly and the weld has held up well. Great product!!

Instructions are absolutely horrible. No idea how to set up and put it together correctly. Had to go get parts for plasma cutter because it did not come with correct parts for a compressor hook up.Haven’t used the welder yet kinda worried I may have bought a machine I won’t like using and may need to upgrade

Ive only stick welded with this and its an incredible little welder! Check my first few welds...Some things to consider // The cables are a little short, so worth upgrading at some point - get some good used cables at a swap meet.. the ground clamp is also light weight but works.I havent tried the plasma or tig yet. Im trying to figure out how to use 220 on this, ac inlet says 110AC, nothing about 220 -I was running this between 65-85 on a 1/8 rod no problem. The 601* rods yielded best results, the 7018 had trouble striking the arc.Either way I welded a small gantry to lift small blocks and this little guy did a great job.. Shop around for a good price, the same thing is everywhere under many different brand names.

The stick welder worked good. The stinger seemed to get hot and cracked off the top end. I couldn't get the plasma cutter to work I could hear the HF clicking in the tower but couldn't get any action at the gun. Tried all the consumables sent with the package. High temperature light kept coming on. probably something with the plasma cutter. Still would be a good welder but short inside or something. I wanted to use the machine for home use.

Worked twice then quit. Plasma cutter function is cheap and terribleI contacted costumer service, they said they would work on giving me a refund, so I guess that is better costumer service then I expected