ELEGOO PLA Filament 1.75mm Grey 1KG, 3D Printer Filament Dimensional Accuracy +/- 0.02mm, 1kg Cardboard Spool(2.2lbs) 3D Printing Filament Fits for Most FDM 3D Printers

I bought the whole 10 pack for color selection to get my printing started. So far they work great. Feed off the spool with no problems (I have been having major problems with other companies) they print a quality piece and I will look for Elegoo for future purchases. I am finding you get what you pay for and this is a value and a good purchase.

Good filament - prints well and was great for printing our detailed set of D&D minis. We used a 0.2mm nozzle on our K2 Plus. One word to the wise though - slow it down! We got much better results printing at half speed compared to the Creality Print defaults. At full speed, layer to layer adhesion was pretty poor and we had models coming apart during print. Slowing it down eliminated that. Now that we have our print settings dialed in pretty well, this filament makes awesome detailed prints.

Easy to install, prints really good, great color and solid color. Hasnt get stuck wich is great as a beginner helps me with projects im learning.

Bought and used at least a handful of 4-packs at this point for my Bambu P1S with AMS. Filament quality is great, I don't think I've every experienced a clogging issue with it nor any issues with the color quality, the red is a little on the light side but nothing insane. Heat bed adhesion issues occur maybe once every few dozen prints, but as long as you keep a close eye on the first 20 minutes of printing, it shouldn't cause too much waste. I want to say one out of every 5-ish rolls I've found to have a minor tangling issue, but nothing that couldn't be unwrapped yourself. Overall, great quality PLA and will continue to purchase from them in the future.

AMS can’t pull the last bit through because it is stuck inside the spool. It’s a pain to get that piece out enough that it won’t bind when it gets to the end. Sometimes it doesn’t. Sometimes it does. I’m lazy and don’t like having to get up to swap spools at 2am. Otherwise, this works well and it is priced well.

Update 10/04/2024: BACK AFTER 1 DAY SHY OF A YEAR! So it turns out the filament wasn't the issue, but was a hot end fan and a power supply fan that were causing the issue. Apparently they were both dying and not cooling the heat sync and/ or power supply adequately. Those were causing intermittant issues with almost all filaments other than one brand that starts with and O. This filament is printing really well currently, and havent had an issue with since doing a major overhaul of my entire hotend assembly and replacing the powersupply fan. 5 Stars for Quality of the filament 5 Stars for quality of the prints with the filament 5 Stars for Elegoo Customer Service (Though they should get 10!) 5 Stars for Elegoo all around from me! ---------------------------------------------------------------------------------------------------------- Update 10/05/23: If I could rate customer service at Elegoo, I would give it 5 stars! Very responsive, and willing to try to get issues taken care of in a timely manner. However, I am settling on a 2 star review of Elegoo's PLA and PLA+. I was sent 2 rolls of their PLA+ to replace the PLA rolls that I purchased, and spent the better part of 2 evenings experiencing the same issues that I originally had with their regular PLA (Under extrusion, clogging, etc.). I even went back and used my filament drier on both of the previously purchased rolls of PLA for 60 hours each, and still am unable to print with them. I love Elegoo, and will always recommend their resin/resin printers, but I can not recommend their filament at this time. I'm going to try to dry out the PLA+ rolls for 80 hours each and see if that makes a difference. Update 09/25/23: Adding 2 stars to my original review. Elegoo customer service was super quick and friendly with a response and reached out to me to offer an option to replace or refund my purchase. I chose to have them replace the rolls, and they stated that they would be sending out their PLA+. Will update review again once I get a chance to test out the new rolls! I bought 2 spools of the black, and printed just fine through half of the first one. Then I started having issues with adhesion, under extrusion, and clogs in my hot end. I was printing at 205C, and leved the bed between each failed print just to rule those 2 factors out. I even tried to increase the temp, but still had print failure after print failure. So I thought maybe the filament had taken on some moisture. I opened the second roll, and the SAME issues developed. I love most other Elegoo products, but would steer clear of this filament for now.

I have tried a few different filament’s and have came back to these guys every time. Good price and good quality. Would recommend!

ELEGOO PLA Filament 1.75mm Neon Green. If your looking for a bright neon green then this should fit the bill. I used this to print my printer enclosure for my Flashforge AD5X and could not be happier. I printed a temp calibration tower and ended up printing on the lower side of the suggested temperature range, 205 degrees nozzle temp worked great for me. I left all of the other settings at default for basic PLA. This was my first time using ELEGOO brand filament, and likely I will purchase it again in the future. No clogs, no failed prints. With a decently smooth finish.

El ELEGOO Filamento PLA 1.75mm 2KG Negro es, sin duda, el mejor filamento que he usado en mi impresora Creality. Su precisión dimensional de +/- 0.02mm garantiza un flujo constante, sin atascos ni burbujas, incluso en impresiones largas a 200-210°C. Los colores son intensos y uniformes, con acabados suaves y sin encordado, perfectos para modelos detallados como figuras o piezas funcionales. La adherencia a la cama es excelente con ajustes mínimos, y las piezas tienen buena resistencia, superando en calidad a otros filamentos como SUNLU. El empaque al vacío con desecante asegura que llegue en perfectas condiciones, y el carrete de cartón es un plus ecológico. Compatible con mi Ender y otras FDM, este filamento es ideal para principiantes y expertos. ¡Por su precio y rendimiento, es mi opción número uno para proyectos de impresión 3D! Totalmente recomendado.

Print mooi ik heb het gebruikt om keer wanden stelton platen en beton banden schaal 1 op 32 te printen Het enige nadeel is de prijs

Me gustó mucho. Excelente para mi impresora 3d creality k1 máx. Soporto muy bien las altas velocidades de 250mm/s. Imprimí ese dinosaurio flexible y quedo muy bien. Sin errores

Best Quality Filament And Role Stand

Excelente material para desarrollo de piezas... Lo recomiendo