AsiaHorse Graphics Card Cooler with ARGB 5V 3Pin LED and Three 80mm Fans, RGB LED Graphics Card Holder, GPU Cooler Easy Installation-White

Does good cooling I dropped about 20 degrees, functions good, worth the money, fans are super quiet, easy to install, and the rgb is super bright

I've seen some reviews where some people were stating this item is not pwm. Maybe they got a defect, I can't say. What I can say is the one I received is in fact a pwm and the fans do as they should with GPU cooling. The RGB's are bright and look pretty awesome as well. This has a very low noise level, unless you have it maxed out on cooling. Easy to install, and an all around decent product.

If you set realistic expectations, this is a reasonably good product. Just understand that the fans are just small 15mm slim profile fans, so they don't move huge amounts of air. But they do ok to supplement the fans on your GPU. I got them because my rtx 3080 FE runs quite hot. I have already swapped out the thermal pads on the gpu, and wanted a bit more cooling. These fans running at around 1100rpm lower the gpu idle temp by about 5 degrees. When gaming and maxed out at 1800 rpm, the fans reduced gpu temp by 3-4 degrees. Small improvements, but not really the fans fault because the gpu's heat sinks are relatively small and can only handle so much heat. The bracket is definitely the jankiest thing about this product. I had to file the screw slots wider before the screws would fit. They are just barely able to hold the fans up, and you have to finagle the fans to be level. It's fine now but I would have preferred a more robust mounting system. The rgb light bar is a plus and integrates perfectly with the other rgb in my rig. Taking into account the low price of $25 incl tax, I think I'm satisfied with what I got. If cooling is the priority, you don't care about rgb and have the space, consider buying the plain non-rgb full height 25mm fan version made by Wathai also sold on amazon. Not as pretty, but that one should move more air and cool better. And it has a better full slot bracket.

I have an MSI RTX 3060ti, 2 fan model, and it gets hot! There's a hotspot on the card that my temp monitoring program picks up and before I installed this GPU cooler, the temp on that hotspot would be over 91c. With the GPU cooler installed, it still runs warm but now rests around 88-89c. The core GPU temp doesn't go above 75c on max load. I didn't expect it to make my graphics card chilly, but it does enough to notice the difference. As for noise level, I think it's just as loud as all my other case fans, so I can't really pick out the sound specifically. I have it just plugged into a regular fan port on my motherboard, so it runs on full speed all the time, which is fine. The noise is not enough to bother me, and certainly isn't as loud as my graphics card running at 100 percent fan speed! As for the mounting system, I saw a lot of reviews with complaints about it, but I actually think that the mounting brackets are nice sturdy metal. The brace on the front of the fans, the part that has the LED strip, is strong and prevents the cooler from sagging. I didn't even remove any of the dust shields from the back of the case, I just installed the cooler right over the top of them, screwing the screws into both the mounting bracket and the dust shields, as seen in one of my pictures. When I first set it in there, it did look a little droopy, but I just bent it upward a little and it stayed. I can even push on it and it won't sag. The ARGB light strip is pretty cool. It syncs up with all my other fans in the case and lights up an otherwise darker spot. It kind of tied the whole look together, really. I think it's pretty great! I would buy again!

This cooler is barely pushing any air at all, good thing about this is it is incredibly quite. I can barely feel any air being moved from the fans and saw no decrease in temps. I would of been better off using a PWM fan and just zip tying it in place.

Overall the product works great, although the fans are very loud, so if you're going for the "silent gaming" build this definitely isn't the option. But to be fair if you messed around in your BIOS setting you might be able to get the fans to run at a lower RPM.

I mean. It’s a cheap little thing. The fans aren’t big but they are noisy as hell. I mean super noisy. But I do have to say it does it job. It brings in extra air onto my gou. Keeping in like ten degrees cooler. Install was super easy. Took me about ten minutes to have all connected and ready to g.

Love how it looks and works great with the rgb controller

Not sure why people are complaining about the bracket, this really fits well and does the job. Seen a difference in temps by 10 to 12 degrees for the graphic card. Well built and the RGB lighting looks great.

Got it today and put it right in. Works well. My gpu temp while gaming wasn't an issue, but idle temp was sitting around 50 c. Which was annoying. Now it is under 35. Gaming temp lowered a few degrees too. This is am rtx 4080 Super. It's also quiet.

. Fits into rgb on motherboards or a rgb fan header or control box displays any color you want on the light strip . Minimal noise . Got it under my Asus tuff 3080ti and when in idle the gpu has a 0 dB fan so when the gpu does not hit a certain temperature it won't run the fans this cooler helps cool it off a bit and in that state I don't see it go above 40c at all . Downside it's a little unstable since it don't sit in a pci slot just has 1 screw holding it

Esse "Air coller" pra placa de video auxilia na refrigeração, há menor desgaste (trabalho) das Fans (ventoinhas) da placa, e com RGB embeleza seu PC

en reposo mantiene mi GPU en 35°C, y jamas encienden los ventiladores de la Grafica, que normalmente encendian a los 40°C, por un minuto y se apagaban a los 35°, y asi como 10 veces por hora. en carga no esperen que baje la temperatura talvez un par de grados. los tengo al minimo que me permite ponerlo mi tarjeta madre y apenas y se escuchan, a maxima velocidad si son MUUUY ruidosos y no hacen gran diferencia, mi proposito fue mantener la temperatura en reposo para que no este subiendo y bajando y encendiendo a cada rato los ventiladores de la GPU. Tapa todo los cables que van conectados en la tarjeta madre, la iluminacion al ser argb de 3 pines conectada a la tarjeta madre se sincroniza y tiene divisor para compartir el conector argb y poder conectar en serie. y se ve bastante bien. y para rematar sostiene la tarjeta grafica para proteger el slot pci express del peso de la grafica. es bueno por donde se mire, refrigera, cubre, luce y sostiene.