ID-Cooling FROSTFLOW X 240 CPU Water Cooler AIO Cooler 240mm CPU Liquid Cooler White LED 2x120mm PWM Fans, Intel 115X/2066, AMD TR4/AM4

My previous AIO water cooler started leaking on its 7th year of service. I replaced it with the ID cooling frost 240. Still rocking an i7-6700k in 2022. 95W TDP chip. With this cooler I get 28C at idle and 69C under full load. Not bad at all! Temps drop to idle temp within 10 seconds. The fans on this are very quiet. I hope this cooler will get me through a few more years before I finally upgrade/rebuild my PC. The water tubes have a plastic weave outer covering and seem generously long. The white LED color and logo look nice, not super bright but visible inside the case. So far very happy with this purchase and the performance and noise level. LGA 1151 sockets are always a pain in the rear to mount these water coolers, with a back plate that you have to hold to the back while mounting the pump to the front. Easier with two people. Don't go crazy with your thermal paste, you really only need a tiny pea size dab in the center before you mount it, no need to spread it the pressure being applied with spread it out for you. So many youtubers are doing it wrong putting tons and tons of thermal paste. It's not neccessary and will only make a mess.

3 years in and working well! Originally I got this for a 4790K. I ended up getting rid of that in favor of a (still old) x99 platform with I7-5960X on socket LGA2011 which this cooler isn't listed as compatible with... but it was either try it or wait for a compatible cooler to be delivered. Since the 2011 socket has its own backplate I was forced to use mounting screws taken from the air cooler I had, but it took some drilling on the pump bracket and some nylon washers to prevent excessive mounting pressure. After all that it fits well! I probably won't replace this cooler until I get something it won't work with or until it runs low on liquid. (all liquid coolers evap through the hoses over time) Temps in the 50-60c range for typical cpu intensive applications even on the overclocked and by modern standards inefficient X99 extreme chip.

I recently got a Ryzen 5900x and needed a better cooler than my air cooler from my previous CPU. I've never used a water cooler and figured it was time to give it a shot. When i first saw the price, I joked to my son that I wouldn't get it because I assumed it wouldnt a quality cooler. Then I heard Linus from LTT on youtube say something good about ID-Cooling, so i gave it a second look. The packing and all the components look and feel quality. Was super easy to install. It is quiet and keeps my CPU cool. Spent a few hours in Modern Warfare 2 on my PC the other day, CPU temp stayed right around 44 degrees the entire time (and normally like 35-ish degrees when idling). I'm very impressed with this AIO and will be getting one for my son's PC as well.

Keeps my CPU at reasonable temperatures. Works as well as any other AIO, but was the cheapest I found on PCpartpicker. I would guess this is because of the lack of RGB, which I don't really care about. It is reasonably easy to install and includes a variety of mounts for different sockets. I would definitely recommend this product.

Like the title says, great kit. Has the mounting brackets for all the CPUs, even the 1700. Clean, well packaged unit. The pump head looks well made, solid. It lights up white and looks pretty good that way, but if not full rgb, having a button to select at least red, blue and green would be nice. I am running this with a DI iceflow vga kit setupon a GTX 1070sc in a smaller atx case. Like crammed and wedged in there. I am holding on giving five stars until I figure out a slight issue. Once I determine for sure that it is my error, I will add that fifth star. My issue is that it is running a bit hotter compaired to the IceFlow vga. The 1070 is overclocked to a high, but Afterburner approved clock and with IceFlow idles at 29-32c and maxed I seen it get upto 49c while stresstesting/benchmarking. Stoked with those results btw. With this frostflow on a Ryzen 5600x, I have seen it idle as low as 39c, but usually it's resting around 45-50c with bounces upward to 55-59c. I don't have a manualy set overclock. Just game boost enabled. It jumps quick and using Cpu Burner with Furmark or Msi Kombustor it gets hotter pretty fast. It will kind of top out at 70-75, but will still very slowly keep ticking up. For everyday use/ gaming at mostly max settings, it does good. Cpu stays in the 60s or better most of the time. It starts to get loud sometimes tho for sure. I wanted this setup so I could run quiet and still cool. Ending up with not so quiet and fairly cool. I hear Ryzen runs hot, and game boost actually seems to tune me up guite a bit, but this seems more than that. Right now, I am thinking that I am not getting good contact between the cooling block and the die. Maybe too little or too much paste, but I usually have good luck with my schmere of paste. I know I got it right with my GPU. I am using CoolerMaster thermalmaker as in my testing, when applied right, I seen 10 degree c improvents over other good pastes on an already efficient cooling solution. There is a chance that I disturbed my paste when I sat the block down. This was a tight build. Could be the small case, but I have great airflow and my Gpu is not suffering. Or it is not tightening down as tight as I like. I believe that someday I will turn thermal paste into diamonds kind of pressure :) Will update when I prove rhat it is my error. Otherwise, I would and will buy ID cooling again. Great gear and great prices.

For the value, this thing kicks ***. It performs the exact same as other "name brand" AiOs, and while it doesn't have a bunch of flashy RGB/Display features, do you really need that when it comes to performance? Not that the cooler itself looks bad! The white LED and logo look very clean and sleek and the dark gunmetal sleeving on the cooling tubes is an excellent compliment. The addition of the 3-Pin to SATA adaptor to power the pump in case you don't have a spare fan header is awesome as well! Overall fantastic value and has had no problem keeping my i7-13700k cool with all cores locked at 5GHz. Idle temps hover around 35C and load temps hover between 68-73C. Perfect!

Bon produit. Fait le job. Efficace pendant le fonctionnement Un tout petit peu bruyant lors d'un "stress test" mais en fonction du prix, il y a rien à redire. je recommande.

I wanted to give it a month or more before reviewing this so as to give it a thorough test and to see how it held up under the stresses of gaming and daily use. The package is impressive and everything needed to fit is included, and it really isn’t as daunting as it sounds. There are various videos and info on fitting on the ID website but it’s not a difficult process and the instructions are straight forward and concise. I run with Ryzen 5 5600x cpu which runs toasty with its standard cooler but this thing keeps it 28degrees idle and never tops 60degrees under load in the most demanding of games and rendering. The radiator is very quiet and the fans are impressive which has also been great for reducing my GPU temperatures too. The build quality is exceptional and it looks great. It’s just mighty good and performs as well if not better than other coolers I’ve used that were nearly 4 times the price. Couldn’t be more satisfied after the last month or so and I will be buying again for my next build. SB

I would like to give my honest opinion on this cooler - after reading many negative reviews. First thing is first- BUY THIS at this price it's a steal. I am running a i9 9900k and it was getting hot on my old cooler at 99-105 so urgently needing something better. I wanted to go water cooler but didn't want the expense until I came across this. Everything you need is in the box, adaptors, wires, splitters and power adaptors you need nothing. The pump is a 3 pin and plugs into your 4 pin cpu header socket which your old fan would normally plug into, alternatively a power adaptor is provided so you can power it straight from the PSU if you'd like. Remember the pump always needs to be running at 100% so make sure if you plug it straight onto the board that the fan settings in your bios are at max. The radiator fans plug into your headers also and there is a splitter so you can power both fans from one port. There are reviews saying this is a bad product and you have to leave it loose as the screws nearly go through the radiator fins. This is not the case the screws are a set length so when it is tightened yes it is near the radiator but no where near going through. On start up the pump was a little noisy, this subsided after 5 minutes I can only assume it was settling or priming or something. When I used to launch my game up my i9 would shoot straight to 95C + and this bad boy is now idling at around 24C and I have done a stress test and tried some demanding gaming and I can't get it to go over 55C. That Is AWESOME for such a cheap kit. I love this, its worth every penny. Buy it.

I was amazed on how well this AIO had kept my CPU cool. It is easy to install hassle free and great value for money! The quality is very premium and is very robust so you definitely don't have to worry about leaks inside your PC. Would recommend.

The cooler is very good, looks nice and is easy to install and helps achieve really low temps. however the included fans arent very good. they are loud and arent very powerful, but what can you expect for £50