Titan ControlMax 1700 Pro 580006 w/ Cart High Efficiency Airless Paint Sprayer, HEA technology decreases overspray by up to 55% while delivering softer spray

It's so hard to find a good painting gun I read so many reviews and we'll it's hard to figure which ones to buy. I was hoping I made a good decision when I bought this one because not all the reviews were great and well I was on a budget since we just bought a home. So I took the plunge crossed my fingers and bought this one. Overall it was a great decision it works great. We painted my house with this machine and it was super efficient. It was easy to clean we had paint left over not like the rental. We did our patio and the back of our house and I was shocked we still had paint left over. Not like the front of the house where we used a rental. It's a great size easy to move around. Was at a great price. Can't wait to paint my gate with this machine. We didn't have any leaks or any problems it was a great buy.

My husband and I have done most of the building of our home after it was erected ( a metal shop and attached house). When last week the dry wall crew (we finally hired someone!) was working on the drywall, I begged the husband to agree to a sprayer instead of rolling the entire house. His brother finally convinced him to get one. We had some reservations about this one because a few did have some hassles, but the resounding chorus of people who repeated the help they got from customer service assured us that it was worth trying. MAN! The husband isn't all that great at thoroughly reading directions and following them, but with a quick glance, it started up, primed, worked like a charm! He got the entire open floor plan (10 ft ceiling)kitchen, dining and living room primed and the main bath before it was too dark to paint. We didn't even get it delivered till 2:30 and it was too dark in the house by 6:00. We have to go buy a lot more paint tomorrow because this is going a LOT faster than expected ❤ I will update if it doesn't last, but both of us couldn't be happier!Edit to add - day 2 to finish priming the rest of the house went a little rocky and my husband was pretty mad at the sprayer. BUT, it was because he got a little lax in the prep. When I ordered the sprayer, I ordered 25 paint strainers and a spare tip. When my husband and his brother both decided that the paint took too long to go through the very fine strainer, the strainer was not necessary and cheese cloth would work sufficiently. I obliged and drove the 10 miles home and got a sieve and cheese cloth and the paint just flowed through, catching some chunks. 30 minutes or so later, the tip is completely clogged, we change tips to the spare one I ordered, it clogged immediately. Husband is cussing the sprayer. We finally clear a tip with high pressure water and high pressure air and I insist we do NOT proceed until we strain it through the super fine paint strainers I purchased when ordering this sprayer. Not a single problem since. We finished priming the entire house and painted ALL the ceilings on day 2. Today is day three and we've rolled 2 rooms and assembled a bathroom. If not for this sprayer, we'd still be priming for days! We're not young people, we're already hurting like crazy and we haven't had to roll primer AND paint on 10 foot ceilings. But DO use a really good strainer for the paint and thin it or you might be cussing the machine for no good reason.

Just as another reviewer stated, I really wanted to love this sprayer. My husband and I have rental properties and this sprayer would save us a ton of time so I saved up some Prime points and bought the Titan Control Max 1700 Pro High Efficiency Sprayer. The name really enticed me. Great marketing - PRO and EFFICIENCY. Perfect. Not.The sprayer is easy to assemble and the instructions are great. The unit would not prime so I even CALLED customer service 3 times and someone was available to answer the phone each time and walked me through troubleshooting.I prepared the paint specifically for the sprayer, by thinning it and straining it in 5 gallon bucket (with water since i was using latex) and tested it with a funnel. The priming went well and suction worked as expected. I tested the spray gun (without a tip), and it also worked well. I screwed the tip on and tested it on a cardboard strip as suggested in the instructions.Once the unit finally primed I started painting. The sprayer worked fine for about one minute before the mist went from a fan to a solid stream of paint. Like a water pistol. All over my wall. So I stopped. I twisted the spray tip 180 degrees but it didn't help. I cleaned the tip and tried again. Same. The sprayer worked for a minute and then clogged. The pressure was also spotty.I visited my local Sherwin Williams who sell Titan products. The recommended a new tip. I tried that. No dice. Same. Exact. Problem. My husband and I both took off work expecting to have this property painted today but instead we wasted 4 hours messing with this ridiculous piece of equipment.The tip was not clogged, but there was no great force behind the mist. The mist was weak and uneven. I thinned the paint even more and the result was the same. The sprayer worked for awhile, then clogged.I really need a sprayer so if there's a work around, I want to hear about it. The one wall that we were able to spray looks AMAZING. My husband corrected the areas where the streams of paint were and the places where the sprayer was actually working look GREAT.

Very nice sprayer! Made thousands of dollars over the summer with it so well worth the price, it also retails for WAY more at any paint store you can find it in. My only recommendation is be very careful with the small rubber piece on the tip, if it gets cut or anything during cleaning it will effect the spray pattern and need to be replaced. Luckily all replacement parts and consumables like the filters are easy to get.I primarily find it useful for cabinets and doors, it doesn't like to work at angles due to the way the pickup tube is angled in the tank, so set up whatever you're spraying in a way that you can more or less hold the sprayer upright or you will get air bubbles, which will sputter and make imperfections in the texture.

This has been such a time saver when it comes to painting! Jobs that would’ve taken us all day, only took a few hours. The spray quality is really good and it is pretty easy to clean.

Awesome product