Gelid Solutions GP-Ultimate - Thermal Pad 90x50 Excellent Heat Conduction, Ideal Gap Filler. Easy Installation Thermal Conductivity 15W (90x50x1.5)

I purchased these to change the thermal pads on my Zotac 3080 Amp Holo as my memory temps were hitting 104 to 106 degrees Celsius at 70% PL and 100 fans.After using these thermal pads my memory are sitting at 78-82 degrees.These are amazing results.One more thing due to cold weather in north india when these pads were delivered they were little hard but after keeping them near GPU they became soft.In the picture the small pieces on side are the old thermal pads. Kept them in case warranty is needed I will put them back before taking to service center

It is great for RTX 30 series memory temp. problem mine just drops from 104C to 84 C. great product in good prices.

Fantastic performance, previously i used thermal grizzly pads on my zotac 3070ti amp holo. They had little to no effect on the card, as the memory temps consistently touched 104 under heavy gaming. But with GELID it doesnt go past 90 no matter what. Without a doubt the best pads.

I've used it on motherboard components attached to heatsink of MSI GV62 8RE.So far so good.Review after one week :1. Although under full load my laptop still goes over 90° (typical MSI Problem) but it's atleast a bit better now, it stays at 94-95° but previously it used to reach around 98-99°. So I'm seeing a 4-5° cooler now.2. At Idle : Previously my laptop used to stay at ~75° at idle but now it stays around 35-40°. So a pretty considerable jump there.3. At mild Usage : previously ~85°, now ~60-65°Note : I also used Kyronaut's Thermal Paste on CPU & GPU along with this pad on components attached to heatsink. So results are accordingly.Installation : these are quite easy to install, it was my first time using thermal pads and I didn't had any problem so you won't have any either.Size : 1 Pad covered all essential parts needed to be covered, except ssd. So yeah good size for heatsink installation.Verdict : Go for it, these are better than stock thermal pads company provides you out of the box.

The product is good.Shipment was on time.Coming to pads - For noobs - These are harder compared to silicon ones. Therefore cut it wisely with a proper blade, or else you can break it.I Used 3mm for backplate of my gigabyte 3080,Along with 2mm for front.Did wonders.The stock ones melted, and replacement reduced the temps drasticallyThermal throttling is no more there.Went from 59-62Mh/s to 102 Mh/s

20c degree reduced after changing.Before applying clean heatsink properly and apply

So I own a legion 5 pro, which as I looked up, uses 1mm thermal pads (as per reviews). After installing these thermal pads, my temperature rose up drastically (from 90-102 C max). Knew something wasn’t right. Temperature on idle is fine, but while gaming, would shoot up 101-102 C. Also, the 1mms do not compress easily. Adhesion is fine. Planning to order 0.5mms now. :/

la version de 1.5mm es la mejor para poner en las 8 memorias Ram y las 6 V-Ram de la GPU en un PS4 PRO, disipan bien el calor y junto con pasta termica de alta calidad son la mejor opcion para solucionar el ruido de turbina de avion de los modelos 7000

Quando comparado com pastas térmicas, os pads térmicos tem:Pros: espessura controlada, estado sólido (silicone), estabilidade química e taxa de transferência térmica constante ao passar do tempo;Cons: preço.

They will start to ooze their magic juices over time if used on hot components like G6X VRAM that's mining, or mobo power stages that are being worked hard.

My GIGABYTE GTX 1080 WindForce 3X OC (GV-N1080WF3OC-8GD) is almost 6 years old at this point, and even though my GPU core temps never rose above 73c I was getting full system reboots after some time. I ended up repasting the card with Gelid GC-Extreme thermal paste on the core, but this didn't completely fix the issue and didn't drop by temps from a whole lot of Corsair TM50 Paste from around two years ago. A quick investigation of the card while playing God Of War revealed that my VRMs on the GPU were getting VERY hot. I ended up taking the card apart, and found out that my GPU has 4 different thicknesses of pads, 0.5mm, 1.0mm, 1.5mm, and 3.0mm. I ended up getting a pack of each, and replaced all pads across the die side and backplate. Only difference from before and after besides the pads and paste was that I covered individual memory chips rather than a strip of three or two to save the material as these pads are a bit expensive.These absolutely made a night and day difference. My Idle temps dropped from 50c to 31c on the GPU core, and fully loaded it's hitting a max of 62c. My card isn't overclocked, by man.Pros:Idle temps dropped from 50c to 31c.Load temps dropped from 73c to 62c.If you use a sharp exacto-knife and a cutting board, the material, even in the 0.5mm size is easy to cut and handle as long as you are careful. The top layer of plastic may come off when cutting, but this didn't effect the thermal pad at all.Pros: The price. You pay a premium for these pads, especially if you need 4 packs like I did, but it was totally worth it. Especially since right now my 1080 is almost worth as much used as it was brand new thanks to current chip and GPU shortages. Because these have performed so well, I haven't deducted any stars because of the price.

Helt klart bland dem bästa thermalpadsen du kan köpa i Sverige. Kolla youtube in du inte tror mig. Rekommenderas starkt!