Libraton PVC Pipe Cutter 63mm, Large PVC Cutter, Improved Blade for Heavy-Duty, Plastic Pipe Cutter for Cutting PVC Pipe, PEX Pipe, Plastic Pipes

Best short handle cutter I've had; superior to my Rothenburger at much more money. Cuts through 63mm mdpe gas pipe effortlessly.

Buying a good product is not enough we should have the knack to use it correctly and that comes from experience. This cutter cut through PPR pipe like hot knife through butter but all the cuts at the end went off track and didnt give the perfect straight cut. Made multiple attempts but stopped as i did not want to waste the pipe. Will have to spend some time on the product practicing to gain correct control. Very sure this will turn out to be good handy tool once i can control the cuts. Build and finish are good.

Nice clean cut

Fab

I refuse to pay the £50/£60 that is being asked for plastic pipe slices that can be found on here. So I thought I'd give this gadget a whirl. Reading the previous reviews I had mixed thoughts, but guessed I'd only find out by purchasing the cutter myself. Without any sugar coating...... It's a pile of garbage. The blade is just not sharp enough. Even if it was, I'd be concerned about the lifespan of it, With other reviews stating that the rachets brake often. As the video shows, the cutter just crushes the pipes. It struggled to cut the overflow pipe, and left a very damaged end on the pipe. I tried it several times on different sizes of pipe. The only time it cut through the 32mm pipe is on the video, but left distorted end which ultimately would not fit in to any fitting. I also noticed 1 tooth on the rachet doesn't appear to have been manufactured correctly, with only half a tooth there. Needless to say, that would wear down quickly or just brake off.

Doesn't work with bigger than 30mm pipes. It does not cut properly.

Perfect for the job!

As expected

great pipe cutter.work great very good job on pipe. well see in time work with it.

I received my PVC cutter today and immediately put it to use in repairing some PVC plumbing for my pool pump. It works really well and has no problem cutting through 1 1/2" Sch. 40 PVC. It's made from nicely finished, sturdy metal and the blade is razor sharp. 5 stars from me on this. I practiced using it on some scrap pipe before I began the real work and have a couple of tips to pass along. First, don't get in a hurry. If you go cranking down on a cut, there's a chance you will crack at least some of the pipe in doing so (even at a balmy 78 degrees at my home). Go slowly, take your time and it will slice through the PVC easily. Second, when you have begun your cut and the blade is barely into the PVC, hold the cutter in place and spin it around the circumference of the pipe as far as you can while trying to keep a straight line all the way around. This will establish a small starter cut around the pipe that weakens it slightly in that area so that if the pipe does crack during the cut, it will likely crack along that small starter cut instead of at whatever point happens to be weakest in the pipe at the time.

Premesso che, a causa del mio lavoro da manutentore, ero alla ricerca di una pinza taglia tubi in PVC e plastica da 63 mm; Vista la premessa e dopo diversi giorni di ricerca, di confronto con diversi prodotti e convinto dalle recensioni positive ho acquistato il taglia tubi LIBRATON (diametro (63 mm) 2-1/2” ; PACKING Il taglia tubi è arrivato nella sua confezione originale in cartone e minimal; Una volta aperto il pacco, la sensazione è stata quella di avere un prodotto di qualità, robusto e ben fatto; All'interno del pacco erano presenti solamente le pinze con l'imballaggio per non danneggiare il prodotto; CARATTERISTICHE • Produttore: LIBRATON • Dimensioni della confezione: 27.5 x 11.8 x 3.7 cm; 730 grammi • Peso articolo 730 g Prima di tutto parliamo dell'estetica: il taglia tubi si presentano con un design minimale ma funzionale, di colore blu e la lama di colore nero; All’estremità è presente una impugnazione rivestita con della resina sintetica che consente una presa migliore durante il loro utilizzo, inoltre il taglia tubi si presenta con un ampio raggio in quanto può tagliare tubi con un raggio di 63 mm esterno; Oltre a ciò lo strumento è dotato di un sistema a cricchetto che consente di eseguire facilmente il lavoro di taglio con una mano Dopo la vendita la casa viene offerta una garanzia di 12 mesi ed inoltre la casa produttrice offre un servizio di assistenza per rispondere alle eventuali domanda nel giro di 1 giorno; CONCLUSIONI Il prezzo è di 25,99 € on la possibilità di usufruire di uno sconto del 10 % tramite COUPON al momento dell’aggiunta al carrello; Per l'esperienza personale la consiglio vivamente in quanto permette di tagliare i tubi in maniera veloce ed inoltre è molto semplice da usare;

Does not cut straight. All these tools are useless, just use the grinding tool!

Para el precio y la funcionalidad, yo diría que es la mejor herramienta de fontanería que he comprado hasta ahora en Amazon, es versátil ocupa poco espacio, y es capaz de cortar tubería de pvc rígida de hasta 10 bares, (cosa que no recomiendo hacer muy frecuentemente, porque no están preparadas para eso) y tienen unos ligeros defectos, a veces la apertura se encasquilla y la hoja se puede llegar a combar un poco si cortas a lo loco, pero quitando todo eso yo sigo manteniendo que son perfectas, (rápidas, cómodas, con un tamaño perfecto, y capaces de cortar el 90% por ciento de todas las tuberias de la industria hoy en día sin problema alguno, Pex, multicapa, niron o ppr, PE, Plastico, mepla, pvc rígido e hidrotubo, etc en definitiva, por el precio y comodidad yo le doy un 5 y muy muy merecido