Donner Small Guitar Pedal Board, Mini Effects Pedalboard Power Supply Set DB-S100 with Convertible Bag Backpack, 60" Adhesive Backed Hook-and-Loop and Power Supply Mounting Device,14.46" x 7.51"

I’m no pedal enthusiast, but I had accumulated several stompboxes that had to be at my feet during a show (iRig BlueBoard to control my sheet music app, my amp’s footswitch, a tuner, some distortion, and some chorus), and so I decided to graduate to a pedal board for no other reason than just to facilitate setup/tear-down and organization. I had settled on this board because I didn’t want to spend a fortune on one (I’m not a heavy gigging player) and this one seemed to be a good size. I like it, and am happy with it. I’ve got to believe there are better ones out there, but this one works great for me. It’s lightweight but sturdy. It doesn’t seem to slide on hard floors. The incline is a bit higher than I had expected, but I have no previous experience so I don’t know what is common. The bag is nothing to write home about, but it serves its purpose of making it easier to transport the board (plus the zipper pocket is big enough for my mix/cable, guitar leads, and iPad). It came with plenty of Velcro that’s of pretty decent quality (although I ended up zip-tying a couple of pedals due to how they are built). All in all, it was worth the price of admission to me. I got it on Prime day, so that didn’t hurt either.

I read the reviews, read about some of the quality issues both with the board and the case - but I still decided to take a chance. I am glad I did!! I have been using it for nearly 7 months and no issues at all. The bag has held up well. It is a little tight getting the board into the bag but it does fit and holds a fully loaded board. The outer pocket is great for extra cables and such. I ordered and installed a Truetone CS7 under it - it fit great! I had to modify the brackets by straightening out the 90 degree bends but - no issues at all and it is very securely fastened to the board. I purchased some zip ties and mounts to keep the underside neat - definitely recommend this to anyone looking for taming loose cables. I did have a couple of areas around the welds where the grinding was a little aggressive and left a couple of divots but the velcro covered this completely. My only complaint is that the glue on the velcro doesn't hold very well to the pedals - especially the rubber base. I did find that if the area is prepped by cleaning with a little alcohol on a cotton ball it does stick a lot better. All in all - I would definitely recommend this to anyone looking for an inexpensive yet sturdy alternative to a PT board. The price can't be beat and it is a very sturdy and (when all is said and done) well built.

I am beyond impressed with this set. It’s basically a pro rig in a bag for a fraction of the price. The board itself is lightweight but feels really solid, and I love that it actually fits 5 of my favorite mini pedals without any wasted space. For anyone like me who wants a tidy, portable setup without spending a fortune, this is a total no-brainer.

The board is sturdy, and the size is good for 8 pedals, or more if you have mini pedals. The bag is a tight fit, you have to be careful when taking the board in or out. The bag is good for occasional use, if I played out regularly, I'd get a padded case.

I ordered the Donner DB-S200 pedal board based on my positive experiences with other Donner pedal boards I have ordered in the past and still use. Those boards were a great mix of affordability and quality and so is the DB-S200! First and perhaps foremost, I have to emphasize the amazing quality of the padded carrying bag that comes with the pedal board! It is the best pedal board carrying case that I own by far. Not only is it very well made, but the backpack straps that are stored in a zippered compartment were a wonderful addition to the case. I own over 5 pedal boards, and I can honestly say that if I need to travel somewhere with any of those pedal boards, I will be doing so with the bag that comes with the DB-S200! Another unique and awesome quality of the DB-S200 is the system it uses for power supply attachment. My major critique of my earlier Donner pedal boards was that they did not have a cut-out that was amenable to mounting standard pedal board power supplies to the underside of the board (I have found ways around this critique, but they are not ideal). In contrast, the DB-S200 has a large cut-out that will accomodate any pedal board power supply, and most importantly, a strap to secure the power supply to the board (in combination with velcro attachment to the board itself). I feel confident mounting any of the power supplies I have to the board using this system. The board itself is welded metal and appears to be very sturdy. The sides of the board are made of plastic with handle shaped cutouts for lifting and carrying the board. Although the plastic sides of the board contribute to its lightweight, this is one area for potential improvement I would point out. Though I am not terribly concerned about the sides breaking, I would feel more reassured of their sturdiness if they were made of metal (as the rest of the board). Finally, the board comes with velcro attached to it, which is a really good thing, because the unique cutout between rails of the board for wiring would be very difficult to cover with velcro if I had to do it myself. This was a very nice attention to detail. If I had any other minor gripe, it would be that I would have personally preferred for the board to be a little wider (which could have come at the expense of it being a little less tall/deep). But, this is an idiosyncratic gripe that may not apply to others. Luckily, I've attached pictures, one of which filled with pedals so you can judge for yourself whether the dimensions of the board would work for you! I would recommend this board to anyone looking for a well-designed pedal board, with an amazing carrying case (yes, I love the carrying case :) )!

The DB-S100 is a sturdy, well thought out design for a small pedalboard. I like that the top surface has velcro applied throughout, and the underside strap is good security for my battery power supply (already affixed with magnets for easy swaps). The included velcro and cable management is a nice bonus.

This is a great starter pedal board. It feels great right out of the box and it is the perfect size to start out with. It came with everything it was supposed to, but you will need to by a power supply. This is a very nice board

Produto conforme descrito. Boa qualidade e cumpre a função desejada.

Klasse, macht was es soll und die Tasche ist auch brauchbar. Nobrainer.

Plenty of space to add extra pedals as I need to. The included gig bag is a real plus and there as enough velcro tape to mount my power supply underneath so the power cables and patch cables are not in contact.

El material no es malo, cumple su función pero no me veo de bolo en bolo moviéndome con esto. No en vano, por su precio he quedado bastante satisfecho. En mi caso, he comprado la de mayor tamaño. Como bien dicen en otros comentarios, la funda me resulta algo endeble, pero no está mal tampoco. El velcro que lleva adherido de serie el pedal board, si cambias y mueves pedales va a ir despegándose. Si tienes muy clara la configuración (probar primero), este problema no lo vas a tener. En mi caso entraron dos fuentes de alimentación y un porrón de pedales que cambio con frecuencia y que voy necesitando para mi estudio de grabación. No la usaría para directo (aunque en directo llevo solo 4-5 pedales). Os dejo fotos, por tamaño, la de mayor va muy bien, ojo si pesan mucho tus pedales, pero está bien.

足元をスッキリさせたくて、エフェクト ボードをこの程購入しました。やはり 足元がスッキリしますね。 今の所不具合は、一切ありません。