DOWNLOAD THE APP
Customer Services
Copyright © 2025 Desertcart Holdings Limited
DOWNLOAD THE APP
🔌 Power Up Your Projects with Precision!
The EBOOT Mini MP1584EN DC-DC Buck Converter is a compact and efficient power supply module that converts input voltages from 4.5V to 28V down to adjustable output levels ranging from 0.8V to 20V. With a maximum output current of 3A and a conversion efficiency of up to 92%, this module is perfect for a variety of electronic projects. Its small size and wide operating temperature range make it an ideal choice for both hobbyists and professionals.
| ASIN | B01MQGMOKI |
| Best Sellers Rank | #45,626 in Electronics ( See Top 100 in Electronics ) #633 in International Power Adapters |
| Item model number | Mini MP1584EN |
| Manufacturer | EBOOT |
| Product Dimensions | 0.4 x 2.2 x 0.4 cm; 18.14 g |
S**E
Excellent adjustable buck style voltage regulators.. don't get hot, provide a soild voltage feed with raises and falls that stay within 1 to 2 hundredths a volt.. give a fairly clean output voltage (still need a LC filter if you want very clean wave forms) provides 0.6 to 23 volts from my testing.. able to pull a constant 3.5 amps off it at 16.8v without it getting hot 2.5amps at 20volts gets warm but ok... 3amps at 20v will cook the coil in about 20 minutes.. at 12v I was able to pull a solid 4.2a off it for 2 hours and the temp never got above 97F, 4.5a at 12v smoked it in 7 minutes... If you cook the coil on it it does NOT allow full voltage to pass through (I have had some buck regs fail and allow full voltage to pass through for a few seconds.. I killed two of these intentionally to make sure that when it failed no voltage pass through and on neither one did that happen and that makes me VERY HAPPY. A failure acts like a breaker, it fails it fails and circuit is instantly broken.. I tested this with a O-scope and it had 0ms of full voltage seep when it failed..) These are incredibly cheap and excellent quality.. over preform and stay dang steady.. These are without a doubt the best cost to preformance ratio bucks you can buy... Bucks are not a place to skimp and buy as cheap as possible BECAUSE a failure on a buck that is supplying constant regulated voltage to high dollar electronics and fail and allow unregulated voltage to seep by for even a 1ms can damage sensitive to voltage electronics and ruin your day and make you wish you wouldn't have saved that 30 cents per piece.
C**S
I got these to power a raspberry pi on my 3d printer. it was really simple to set it to 5.3v out on 24v in and it gets warm but not to a concerning level. voltage seems steady. Seems to be working great! cant wait to use the other 5 somewhere
K**.
Great product, work as described.
A**E
As described. Works perfectly.
A**R
It had the right pin pitch for a breadboard and the pot could be adjusted to get the right output voltage.
Trustpilot
2 months ago
1 month ago