OVERTUREPLA Filament 1.75mm 3D Printer Filament, 1kg Cardboard Spool (2.2lbs), Dimensional Accuracy +/- 0.02 mm, Fit Most FDM Printers (Midnight Black)

I am a fan of Overture filaments. I am printing with an Ender 3 S1-Pro. I have used a handful of colors from Overture, and so far the print quality is very good. Bed adhesion has not been an issue. I am only giving this last purchase 4 stars because the color is slightly off from the picture (I wish we could do half stars so I could give it 4.5). I ordered both the red and green matte spools, and the color of both is a bit lighter than what is shown in the picture. When looking at the spools they do look a lot lighter than the picture, but I suppose if I printed a thicker surface the color would be much closer but didn't really want to waste the material.I have also used the light brown, and chocolate matte colors and they are very close to the pictures.Overall, I would recommend these filaments!

I exclusively use Overature PLA in my printers because I know the melt points and what works well for me and my printer (ender 3 max, anycubic vyper). Overall the product is of consistent quality, however that brings me to an annoyance.Recently I was printing and had some odd issues that seemed like over extrusion so i made a few changes in the slicer but the problems persisted. I went to measure the filament and to my shock the filament was 1.80-1.81mm OD which meant i was over extruding as it wasn't 1.75mm as stated. I created a custom PLA profile for 1.805mm splitting the difference and the over extrusion issue seems to have gone away for the most part, now i need to check calibration of esteps.you could say that this was isolated and solely to a single roll, however i checked across the dozen or so rolls in various levels of use, various colors and all of my filament was in the range of 1.80-1.82mm. You could also say the calipers i used were garbage but they weren't cheap garbage. I use an affordable imported brand from amazon on my printers but when I want to check precision i use my MITUTOYO calipers, which also yielded the same OD for the filament.that said you will find material as quality, but you will want to check the diameter of the filament or you might have some extrusion issues like I did.

I have never been disappointed with filament from Overture. They make quality filament for a great price. I have never had issues with feeding or adhesion. I pretty much only purchase Overture filament now because I need something that will work 100% of the time. I never have to wonder if I'm going to have issues, I can just click print and walk away. The colors are always perfect and you can see how much filament you have left on the roll thanks to their markings. I highly recommend Overture if you're looking for a quality filament at a good price. I'm printing on a stock Prusa MKS3+

I have used two rolls of the matte black so far, and I love it. I haven't encountered a single issue regarding layer adhesion, bad winding, etc. It prints easily and beautifully. The matte sheen gives prints a much more ~premium~ appearance, and really helps to disguise layer lines. I actually prefer this filament over the much more expensive Prusa Galaxy Black.I'm on the fence regarding the matte white however. When printing at lower layer heights, I end up with more nozzle build up than I am used to. I also encountered my first proper clogged nozzle while using the matte white, though it has performed fine ever since. Regardless of those issues (which may just be from my lack of tuning, given other reviewers success with the filament), it still looks great once printed. Prints end up with a clean, paper-like texture.

I'm starting to transition the products I make to use matte filament for the base color options simply because the lowered glossiness of the material results in prints that look noticeably better. The details of models printed with a layer height of 0.2mm stand out more and surfaces look smoother due the way less light reflects off this PLA. I've used the matte yellow, white and now I'm running off prints in matte black and matte blue and I love the way my prints look in this finish.I'm giving this 4 out of 5 for adhesion due to the fact that even though my models are sliced to print at HE 200-205 and bed temp 60-65 (within the recommend range of hot end temp 190-220 and print bed temp 50-70) I have to adjust the settings on my printer to use this filament. I have been printing my models with regular Overture PLA at 210/205 and a bed temp at 60/65 with no warping, the Overture Matte PLA will warp unless I drop the bed temp to 50 and raise the hot end to 210. It's not a big deal and I'll probably re-slice all my prints at some point but for now adjusting manually works and I really like the way this material looks.

The filament is as advertised. Matte, black and easy to print with!At the end of the day, a good filament to me is easy to print with, and reliable. I don’t want to have to baby sit the first layer every time.For this filament, the first layer does needs to be dialed in to get the right squish. It can’t be too high for the first layer. It seems to be extra stretchy when it is still warm so i had issue with it catching on the nozzle and causes blemishes or failing on the bottom layer. However, once I got the first layer dialed in I didn’t have any adhesion issues throughout the whole spool.

I bought the matte white form of this filament to use making lithophanes. Overall it's a decent low-cost option, but it's pretty fragile and prone to slight delamination when working with thin layers. PLA+ filaments will definitely perform better, but the value for money on this filament is to me far superior

I thought this was a good brand but I am incredibly disappointed because of I have had no-name filament performing way better than this one. I got the Matte White and it has a huge amount of problems with bed adhesion, the finished quality is bad and is it badly winded on the package so I assume I will face more problems later. Avoid this brand.

Good filament at good priceWinding is goodWas sealed properlyCardboard spool was straight205c/55c ret 6mm bowden

great quality pla