USKEYVISION Phone Case for iPhone 12 Pro Max Exclusively, with 17MM Thread for Mouting The Attached Lens, for Anamorphic Lens, Macro Lens, Fisheye Lens, DOF Adaptor, for Vlogger/Youtuber (UVMP-MAX)

I purchased this case the moment it became available because I knew how good it was from owning one for my older iPhone model. It is compatible with the screw on type lenses (anamorphic, macro, etc) available from companies like Ulanzi so for me it was a no brained because I already had all that gear. The amount of protection it provides makes me feel really confident as well. It is low profile yet sturdy. The raised lens threaded lens mounts act to protect the phones lenses. When paired with a screen protector the raised side lips are just at the right height to give adequate clearance when the phone is turned over. Even the lightning connector cutout is side perfectly for me with enough clearance to fit my special magnetized lightning cable into. Overall, good value but with a lot of features that gives you room to upgrade your setup if you wanted to. Essential for casual/amateur iPhone photographers and videographers.

This phone case is better than I expected it to be. I noticed that there were several reviews where people claimed that the image showed a Moment lens. Of course realizing that the image simply showed an anamorphic lens attached to the case, and not any particular brand I decided to purchase this case.I was worried since the image doesn’t show how the front looks on the iPhone. To my dismay, like with all cases these days, there is a slight bezel rather than having the edge of the case flush with the screen. I don’t use screen protectors on my phones, and neither do I slam phones on tables or put them face down so I really wish manufacturers would provide a case that lacks a dust-collecting raised edges to them. Not everyone is rough with their phones so why should everyone have to suffer from other people’s negligence. Fortunately, it is raised by about a millimeter only so it is not protruding that far but as I keep my phone in my left pant pocket, I have to keep blowing the dust off my screen. Did I mention I’m an obsessive compulsive perfectionist?Now off my soap box about the raised edge. The case has a smoother texture than the case I had on my phone before I purchased this one and it makes it a lot easier to slip my phone in and out of my pant pocket. Unlike the really cheap ultra thin cases I typically purchase, this one is really thin as well (only a fraction of a millimeter thicker other than the camera portion) but the edges are not rigid and a little softer as it hugs the phone. The inside appears to have a slight heat-dissipating design which is useful during the hot summer months.Now, for the reason people purchase this case: the lens attachments. It comes with screw on thread for both the 1x and 2.5x lens on the iPhone 12 Pro Max but not for the .5x lens. The edges around the light meter, LIDAR sensor, and .5x lens are angled away which is good for channeling light on to these sensors. The screw threads for the 1x and 2.5x lens’s don’t go all the way around the lens to help channel light on to the lens when shooting without any attached lenses. Consequently, it takes a little finessing or learning curve to properly screw on a lens on to the 17mm thread of this case. I did notice that when the lenses are screwed in, they are not flush with the lenses on the phone. Since lenses come with lens clips they typically are a little raised from the camera due to the clip, the designers of this case thought things through with keeping it the same way as that is what the designers of the lenses factored in with the optics of their lenses.Overall, this case helps line up lenses to the phone without the guess work as a clip attachment so I can carry lenses on me without the tacky lens clips that come with them.

Disappointed, I have the 1.55x anamorphic, and while it screws on perfectly to the hole covering the telephoto lens on my IPhone 12Pro Max, it won’t screw into the hole I need, the normal wide lens (not the ultra-wide, just the normal lens). It’ll screw in halfway, but it’s not even close to how it goes into the telephoto. I’m guessing this is just a manufacturing defect, but it’s a unlucky one, as it leaves me with a subpar experience, my lens is just hanging on by a thread.

I’ve been looking for a case with 17mm threads for my anamorphic lens since I upgraded to the iPhone 12 Pro Max, but everything I found was in China so I decided to wait. Then I found this one on Amazon, and despite the mixed reviews, bought one. I’m glad I did, because it is exactly what I needed.This case is very thin, I wouldn’t expect it to protect the phone much if it were dropped. Another thing to mention, only 2 of the 3 lens holes are threaded, you can’t put any lens over the ultra wide lens. Which is fine, but thought I’d mention it.I also use a gimbal, and this case with the anamorphic lens isn’t a problem for it.Durability 3 out of 5Sturdiness 4 out of 5Value for money 5 out of 5If you are prone to dropping your phone, I wouldn’t make this your every day case. But all in all, if you need a case to mount your 17mm thread lenses, it will do the job!

The media could not be loaded.  This video is taken using iphone 12 pro max using Ulanzi 1.33x anaphormic lens, G2 with Freewell 6-9 mist + VND filters on a USKeyVision case. You can mount 17mm lens on the iphone 12 pro max Tele and Wide but not on the Ultra wide lens with this USKeyVision case.

The photos show moment lenses on the case, but you cannot mount moment lenses on this case. You can mount standard screw on lenses, but the seller should not show moment lenses, they need a special case you cannot buy on amazon.

This is the first 12 pro Max lens case I’ve been able to find without having to wait for a later date to release.I hooked up my moment lenses with no issue at all! No problems with them not being centered and I actually dropped my phone with this case in and my phone didn’t receive any damage at all. The case has a few dings but the build quality hell together. Not only will I suggest getting this but I’m also buying a 2nd one! Great case.

I dropped my phone a couple times and this thing did nothing to protect it. Scratches and marks all the way in the back of my new investment. Luckily despite the scratches the lenses weren't damaged. Do not buy.

Great case. I use it all the time and it does fit my lenses and the materials are strong (black plastic and silver aluminium). I have found, however, that it feels a little like it is cross-threading when I attach the lenses and I have to be careful to make sure they are straight and not causing any damage, but once it is on I am happy with it. It may be that there are more than one type of thread, even though the diameter is the same. I have had other cases that for the threads more confidently but they were made of plastic, which is inherently weaker and some did crack with use.

AVOID at all cost! This doesn’t fit the iPhone iPhone 12 Pro Max properly as the edges of the case don’t cover the phone entirely. It’s easy enough to get the case on but it leaves gaps around the edges on the front of the phone exposing the bezel of the phone. I am stuck with this until my replacement arrives from another website but DO NOT BUY THIS. The back quality is rubbish and has a semi gloss finish which makes it slippery to hold and the finish overall is appalling!

アナモルフィックレンズを12promaxで使うために購入しました。撮影の度にレンズを取り付けるのは面倒なのでノーマル撮影時にはケースごと取り外します。qi、マグセーフ充電も可。

アナモルとその他スマホ用レンズの為に購入しましたが想像以上に安っぽいです。レンズは一応固定出来ますが、ピッタリ装着するのが難しいです。恐らくカメラのねじ込み口はバカになりやすいと思いますので、レンズ交換の際は慎重に取り付けた方が良いです。ただ、こういったスマホケースは種類がそんなに無いので興味がある方は覚悟の上購入する事をおすすめします。

Aliexpressで買えば1000円ちょっと、このクオリティであればそのくらいが妥当です。中国直で買うのと大きく違ったので、品質相応の金額を設定していただきたい。