Partsam 20Pcs 4.7mm-12v Car White Mini Bulbs Lamps Indicator Cluster Speedometer Backlight Lighting

Pulled the dash gages out of my mother’s car because she didn’t think the factory analogue lights were bright enough. Added these on a fused circuit that goes on with ignition. Worked great!

A fine bright light. Make sure you get the polarity correct or it won't light. Positive wire to longer lead on LED.

The installation took a little bit of time, but with a little care and some careful soldering you will have some repaired dash lights. The only downside is that these are a lot brighter than the original bulbs and so they don't match the brightness of the multifunction display. I have adjusted the dimmer to make myself not be blinded at night, but if they come on during the day for some low light issue, then the multifunction display goes so dim that I can't see it during the day. Overall, this was a fix, but it's not perfect, hence the 4 star review.

Replaced all incandescent lights on Duramax instrument dashboard. Once you figure out where the ‘+’ is on the light replacing them allis easy with a small soldering iron, wickit and good rosin core solder. Looks amazing when all done. Like a new vehicle and they WON’T burn out. Also hard to find item so look no further.

Happy with the results with my 2006 Chevy Failblazer. Here are some tips I learned during the replacement process. I took a multimeter and marked all the positive & negative points. Red & black sharpies worked great. Do all the lights, as some were reversed to what I thought. Next I used needle nose pliers to bend a consistent bend / height. Next, cut the extra off and tin the ends. See photo included. Removal of old lights was easy, only 2 solder points. Test the board (only) before you reassemble the display and re-install. The directionals and dimming function worked fine. Results, a lot brighter than the OEM lights. It has somewhat of a blue hue to it, which I like better. Time will tell with how long these hold up. I have plenty of spares, but would rather not have to repeat this project. Hope this helps with your project. Also, watch YouTube. 😉

They sent me blue lights. I didn't find out until I had installed them. Totally bummed out. I either have to change everything blue, but these do NOT match why white lights through my vehicle.

After installing these in a few of our company Silverados that had lights go out I had to do them in my 2004 Avalanche, I like them so much I ordered more and did the HVAC controller to.Tip: For the GM clusters with the white plastic piece that the original bulb sits in, simply pull the old bulb out and look inside the plastic piece there’s two dimples drill those with a tiny drill bit, then insert the LEDs through the two holes and fold the legs to the side then set them on the board and you have a leg to solder. So much easier then trying to solder them free standing.

Lamp indicator cluster bulbs great quality! Very bright , work with light dimmer switch. Used on 2005 Chevy avalanche 1500 z71 instrument cluster. Easy to install and great affordable price!! Happy customer…😁