Pc Products Pc-petrifier Water-based Wood Hardener, 470ml Bottle, Milky White

Pc Products Pc-petrifier Water-based Wood Hardener, 470ml Bottle, Milky White

Q: Since I don't want to sand stain off the soft wood, would it work to drill small holes into the wood and "inject" the product directly into the holes?

I think this might work, I had very old shed with rotten windows sills and drilled holes in rotten wood. This was some years back. If I remember correctly it instructed you to drill holes for deeper penetration of the decayed areas of the wood. I will say the wood was more like rock when hardened

Q: I'm replacing slats in an old bench with new pine. Would this be good to harden and waterproof the new/undamaged wood, then stain after?

No, new wood won't absorb it very well. It's for old spongy wood. There must be other products that are designed for preservation rather than restoration. (BTW, I wasn't impressed with it for old wood either.)

Q: Can this be used on mdf or particle board that has begun to expand and separate slightly? Such as the bottom of an arcade cabinet?

This will stop rot and hold together wood that has become rotten. The expansion will not go away. You might use in conjunction with yellow carpenters glue (water proof) and clamp the cabinet to force expansion and separation back to proper form. I have used on wood that had termite and water damage and the restorer hardened the wood and do the same for manufactured wood.

Q: Does the wood need to be completely dry?

I'm guessing it would be better if the wood was completely dry but I do it with wet wood all the time. I stabilize wood with this and I use a vacuum pump to do it. Once the vacuum pump draws a suction on the wood while it's submersed in the hardener it will have all the air sucked out of it and the hardener will will saturate it to the bone so the thing will be stabilized so that you could run it through the dish washer. There are several videos on this on YouTube. Hope this helps.

4.6/5

Product ID: 253302973

Secure Transaction

Details

Brand
PC Products
Item form
Spray
Scent
Petrifier
Specific uses for product
Bottle
Material features
Biodegradable

⏳Fast 24-hour initial cure

💧Deep wood penetration

🌡️Wide temp range 33-200°F

Frequently Bought Together

PC Products PC-Petrifier Water-Based Wood Hardener, 16 oz, Milky White 164440

PC Products PC-Woody Wood Repair Epoxy Paste, Two-Part 6 oz in Two Cans, Tan 083338

Gorilla All Purpose Wood Filler, Natural Finish, 16 Ounce Tub (Pack of 1) - Water Resistant for Indoor or Outdoor Projects and Repairs

Description

💪 Harden your wood, elevate your space — don’t let rot hold you back!

FUTURE PROOF SEAL - Seals wood against future damage, extending the life of your decorative trims and frames.
TEMPERATURE TOUGH - Performs reliably across a broad temperature range, from chilly 33°F to scorching 200°F.
REVIVE REINFORCE - Transforms soft, rotted wood into a durable surface ready for priming and painting.
DEEP PENETRATION POWER - Water-based formula saturates wood fibers for lasting strength without surface residue.
FAST TRACK RESTORATION - Achieves initial cure in just 24 hours, minimizing downtime on your projects.

PC Products Pc-petrifier is a 470ml water-based wood hardener designed to restore and strengthen soft or rotted wood in non-structural areas. Its thin consistency deeply penetrates wood fibers, curing within 24 hours and fully curing in 3 to 7 days. Suitable for prepping old wood for painting, it operates effectively between 33°F and 200°F, sealing wood against future damage.

Specifications

Manufacturer	Protective Coating Co.
Part number	164440
Item Weight	454 g
Product Dimensions	20.96 x 6.35 x 6.35 cm; 453.59 g
Item model number	164440
Size	16 oz
Color	Milky White
Volume	16 Fluid Ounces
Item Package Quantity	1
Specific uses	Bottle
Batteries Included?	No
Batteries Required?	No

Have a Question? See What Others Asked

Since I don't want to sand stain off the soft wood, would it work to drill small holes into the wood and "inject" the product directly into the holes?

I'm replacing slats in an old bench with new pine. Would this be good to harden and waterproof the new/undamaged wood, then stain after?

Can this be used on mdf or particle board that has begun to expand and separate slightly? Such as the bottom of an arcade cabinet?

Does the wood need to be completely dry?

Common Questions

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Ali H.

Fast shipping and excellent packaging. The Leatherman tool feels very premium and sturdy.

1 day ago

Neha S.

Excellent communication throughout the order process. Product is perfect.

2 weeks ago

View all Trustpilot reviews

Shop Global, Save with Desertcart

Value for Money

Competitive prices on a vast range of products

Shop Globally

Serving over 300 million shoppers across more than 200 countries

Enhanced Protection

Trusted payment options loved by worldwide shoppers

Customer Assurance

Trusted payment options loved by worldwide shoppers.

Desertcart App

Shop on the go, anytime, anywhere.

₪406

Duties & taxes incl.

Israelstore

Free Shipping

with PRO Membership

Free Returns

30 daysfor PRO membership users

15 dayswithout membership

Secure Transaction

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Ayesha M.

The product exactly matches the description. Very satisfied with my purchase.

5 days ago

Anjali K.

The product quality is outstanding. Exactly what I needed for my work.

1 month ago

View all Trustpilot reviews