🔗 Connect with Confidence!
The Joywayus 3 Way Shut Off Ball Valve is a robust brass fitting designed for efficient pipeline control. With a T-port design, it connects three orthogonal pipes while maintaining communication, ensuring durability and ease of use in any plumbing setup.
| Material | Brass |
| Brand | Joywayus |
| Exterior Finish | Brass |
| Inlet Connection Type | Barb |
| Outlet Connection Type | G Connector |
| Number of Ports | 3 |
| Valve Type | Ball Valve |
| Manufacturer | Joywayus |
| Part Number | 6SY-FER-50120 |
| Item Weight | 14.9 ounces |
| Package Dimensions | 5.16 x 3.58 x 2.72 inches |
| Item model number | 6SY-FER-50120 |
| Size | 3/4" Barb |
| Style | T-Port |
| Item Package Quantity | 1 |
| Batteries Included? | No |
| Batteries Required? | No |
S**E
Quality made and solid feel. Smooth function.
Well made and installed into the water system of my small RV. All the parts in one kit for a valve for shore water input to the camper system.
J**K
Needs gaskets so I printed some works great no leaks.
Some other reviews were correct, the barb adapters do not seal or bottom out in their holes and would require a lot of the included Teflon tape so I 3d printed some fairly thick tpu gaskets for the barb adapters and that solved the problem. The valve was a little stiff at first, no leaks once the gaskets were added and I 3d printed a mount to fasten it to the inside of a sailboat cabinet under the sink for a fresh or salt water selection valve.
J**.
This is a good ball diverter valve for use with hose..
These are good ball diverter valve.Note that it is BSP threads so you will likely need pipe sealant to seal it if using anything other than the included hose barbs. (BSP threads are straight threads which usually seal with pipe sealant, or a rubber or silicone washer.)
J**K
poor quality--cannot use. Do not buy
Look inside when valve is supposedly closed--not. Air gap on each side. Mechanism does not provide alternative of straight or T flow.
D**R
great delivery
perfect
D**O
Not threads not made correctly
The threads either in the valve body or on the barb fittings are not manufactured correctly. No NPT thread should bottom out like this. Excessive tape required etc....
S**.
Overall Good
This valve works well. It has been observed that the threaded portion of the barbed connector is too short to fully seat. It thus leaks. I tried O rings without success. I then did solve the leaking with aerator washers from the hardware store. Rubber washers should be included from the manufacturer or seller, because it only works with that addition.
D**R
Good order
Just what I ordered
Trustpilot
2 weeks ago
1 month ago
