VCELINK GJ468 Network Cable Tester, RJ45 Ethernet Cable Tester for Cat5/Cat6/Cat7 LAN Cable & RJ11 Phone Cable

For me this has been an absolute Godsend. I have many cables in my spare cable box and rather then have to test them randomly to see which still works I have been able to use this inexpensive device to check, which to date it has done reliably, leading me to bin the faulty cables with confidence. I have also used it to test cables when devices haven’t been working correctly to find that there has inevitably been a cable problem and having purchased an RJ45 crimping tool I can now reassure myself that the crimping has worked OK. I’m very happy with this purchase and wouldn’t hesitate to buy another.

This is a great product. 100% accurate in my using. Very simple to use and works perfectly. Handy to have if you're making lots of data cables and you need to check continuity and yo make sure all yhe pins have been terminated correctly and pairs in the right order. Highly recommend.

This network cable tester is straightforward and very easy to use, even for someone with limited networking experience. The setup is simple: connect the master unit to one end of the cable and the detachable remote to the other. It quickly identifies whether a cable is wired correctly or if there is a break or fault, which makes troubleshooting far easier. The instructions are clear and simple to follow, which is especially helpful for those who are new to networking tasks. The device feels well made and reliable in operation. The only drawback is that it does not come with batteries included, which would have made it ready to use straight out of the box. Overall, this is a practical and dependable tool for testing network cables. It is beginner-friendly, accurate in identifying faults, and good value for anyone setting up or maintaining a small network.

Great product, had to wait for Ethernet cable I put together to see if this works and it did! it allowed me to see a mirroring error perfectly and enabled me to fix the cable. Great piece of kit and highly recommend. My hobby is to work on electrics, networking, cabling, tools etc and this is definitely one to add to the collection for any IT individual who wants to extend Ethernet runs.

This tester does identify cable faults. If you've made your own ethernet cables (or just renewed a plug) it will show if some wires aren't properly connected or if they're in the wrong order, but you do need to be able to see both ends. I used it to check a cable already in place between two rooms on different floors, so I needed someone to read out what they were seeing on the other end. It was a sequence error so we needed to be on mobile phones to discuss sequence we were both seeing. It works well and is fairly easy to use so is good value for money

Does exactly what it says it does. Helped me test a few cables I was making up and work out a couple of issues with them. Well worth the money, well made and easy to use.

I used it for the first time today after installing 4 x Cat5 cables and wall sockets. it actually indicates any problems with the circuit. It identified a connection problem I had (open circuit) with the number of the wire. A must have tool when installing security cameras. A good quality tool.

I ran a cable around the outside of my father-in-laws house to a room which just didn't get a good enough Wi-Fi signal and connected it to a switch for everything to connect vais Ethernet in that room. I couldn't get it to work at first and thus helped to show me where I was going wrong. Worth every penny.

iyi

This cable tester works exactly as described. It’s simple to use — just plug in both ends of the cable and it quickly shows you if everything is wired correctly. It’s helped me identify a few bad cables and confirm my new Cat6 runs were good. The build quality feels solid, and the detachable remote makes it super convenient for testing longer cables in different rooms. It’s small, lightweight, and easy to carry in a tool bag. For the price, it’s an excellent tool for anyone setting up or troubleshooting home or office networks. Highly recommend for both beginners and tech enthusiasts.

Gör vad den ska.

Letztes Jahr musste ich 2 LAN-Dosen setzen und ein Netzwerkkabel in einer Trockenbauwand verlängern. Da ich die Wand nicht schließen wollte ohne die Verbindung zu prüfen habe ich mit den VCELINK Kabeltester gekauft. Dieses kleine, aber leistungsstarke Gerät hat sich als unverzichtbares Werkzeug erwiesen. Was mir besonders gefällt, ist die Vielseitigkeit des Testers. Er unterstützt sowohl RJ45- als auch RJ11-Kabel, was bedeutet, dass man sowohl Ethernet- als auch Telefonleitungen überprüfen kann. Die Bedienung ist denkbar einfach: Kabel anschließen, Testknopf drücken und schon erhält man eine klare Anzeige über den Zustand der Verbindung. Die LED-Anzeigen sind hell und leicht verständlich, sodass man schnell erkennen kann, ob ein Kabel richtig verdrahtet ist oder ob es Probleme wie Unterbrechungen oder Fehlverdrahtungen gibt. Das spart enorm viel Zeit bei der Fehlersuche und -behebung. Die Qualität des Testers ist ebenfalls beeindruckend. Er fühlt sich robust und langlebig an, was darauf hindeutet, dass er auch den Anforderungen des professionellen Einsatzes standhält. Die kompakte Größe ermöglicht es, ihn problemlos in einer Werkzeugtasche zu verstauen und überallhin mitzunehmen. Ob Sie nun ein Netzwerk-Enthusiast sind, der sein Heimnetzwerk optimieren möchte, oder ein Profi, der täglich mit Kabelinstallationen zu tun hat – der VCELINK Kabeltester ist eine lohnende Investition. Er ist zuverlässig, einfach zu bedienen und spart Ihnen wertvolle Zeit und Nerven. Klare Kaufempfehlung!

Oke heb dit product aangeschaft om alle Netzwerkkabels door te meten. Deze zijn in de muur verwerkt en maakt het met dit apparaat stukken makkelijker om te testen.