Wireless Remote Switch 12V,1500M Meters Long Distance,DC 12V/24V/48V/72V /40A Relay RF Remote Control Switch for Water Pump Motor Lighting Farm Agriculture(Switch 12V)

Does not require line of sight. Have tested up to about 600'. Note that remote control units use 9V batteries, but the switch itself draws power from the input. I am using the DC model, and the negative terminal is simply passed through from input to output, only the positive terminal is switched. In other words, in case you are wondering, this is not a double pole switch. Everything worked out of the box, wasn't necessary to "pair" or "program" anything. Have only had it about a week, so don't know yet about longevity. So far, very happy. Also, fyi, there is a green light that comes on on the switch when the switch is turned on, but there is no feedback on the remote control units, no way to tell if switch is on or off. There is some seemingly random blinking with that green light that I haven't figured out yet, but the switch state is steady, it remains on regardless of the blinks. Ordering another to use in related application (this is to turn pump on and off via relay, with other I hope to manage a valve). May get a third to keep for spare.

Mounted this in a water tight box and mounted it to the power pole at the well. Distance from house about a quarter mile. No problem operating, didn't need to extend the remote antenna. Unit antenna has a magnetic base, easy mount on top of breaker box. Switch on side of remote, " N/F" N = ON, F= OFFWeird, but whatever. As long as it works, which it does.Complaint - if your going to design something that takes 40 amps, size the terminals for that wire size.Used ring terminals to connect #10 wire to it.

What a great tool. We use it to control a fountain in our lake. It's advertised to work 1500 meters away from the remote control. That's 4921 Feet away ! One can hardly even see that far. We are only 500' away from the unit and it works great, and actually almost instantly. It also comes with two remote controls. Be prepared to know how to hardwire some basic electric items though. I cut an extension cord in 1/2 and wired it in and out of the unit. Get one !

The best feature is its long range. I use it for my pool lights. The switch is outside connected to my pool panel and I can use the remote from inside the house with the doors closed. I have never had to use the antenna on the remote but I suppose that would increase the operating distance even further. The only small drawback is that the remote is slightly larger than your average modern remote. It’s about the length of my hand and about an inch and a half wide. It’s not attractive but it works fine.

I use this remote switch to turn on the bilge pump in my boat about 500’ from my house. Works every time!

I installed the remote inside a metal box, used it to energize a 240vac 40-amp magnetic for a 5 HP motor on a pressure washer.I fed the antenna out thru a plastic plug and mounted it on top of the box.I followed the setup instruction and the magnetic snapped it on the first push of the on button.I recommend this RC to anyone wanting a workable product.

This product is set up so in the Normally Closed configuration, thus; if there is a power failure and the switch is on, when power returns, the switch will be turned off. For example, if you have the switch controlling a pump or a light and the power goes off, when the power comes back on the pump or light will be off. You will have to switch it back on with the remote.

Very easy installation , I am using it to run 13 Anp. 2 HP central Vacuum motor It functions throughout the whole house . Using one remote upstairs and one downstairs .It paired right up all by itself. The only issue is the on off Battery is not clearly marked, for some reason it is designated. F or N not sure why .