EVIL ENERGY 2.0'' Exhaust Clamp, Lap Joint Band Clamp Stainless Steel for Pipes, Mufflers, Catalytic Converters (2PCS, 2.0 inch)

Worked as it should, stays tight and no leaks. Make sure you are free of any burrs so clamps lay flat to mating surface/ circumference of pipe. Holding up to heat and weather very well.

1st order got sent without the hardware... seller made it right & sent a whole new set. Grade A parts & customer service!

While this is shaped and designed for round pipes, I decided to give it a shot to see if I could help seal a lap joint on my exhaust which has an Oval section (2.5"x4"). Worked like a charm! No leaks of air or condensation. On the attached image it is the clamp at the left.

I bought the 2" ID/OD connector. Fit was good. Clamps tightened up nicely. These are good for short term usage. I wouldn't trust them for long term usage as the metal is quite thin and once under tension may split if in an area where corrosion is a concern. These will need sealant or exhaust tape to make a 100% seal. The design of the clamp won't make a 100% seal. The amount of leakage depends whether you're using a slip joint or butt joint. When compared to a U clamp, they're much easier to use, allow for removal, less leakage. However, a U clamp will have a longevity advantage.

Works as described. Very easy to install. Made out of durable stainless steel so it should last a long time.

These work great. Add some copper exhaust sealant and tighten it up good.

They work but definitely could be better. Too thin to really tighten and keep piping from moving. Spend your money on thicker versions.

Fits like a glove

When I removed from package I was surprised how thin and weak this clamp felt.

These clamps are small for their labelled size. Exhaust piping is sized by inside diameter, these clamps are sized by outside diameter. If you have 2.5" exhaust piping, you will want to order the 2.75" clamps because the 2.5" will be too small and will leak. Other than that, the quality is pretty good. The bolts are strong and can be tightened up PFT with an impact without stripping threads.

Worn out clamps on exhaust pipe and resonator causes separation. Installed this, fits perfect. Now more secured. Good quality, does not easily deformed.

No las use, pero están muy bien hechas y de buena calidad

Great clamps