Acoustimac DMDBT4000C Corner Bass Trap. 8 Sq. Foot Low Frequency Absorber. These panels are loaded with high performance 6lb Rockwool Insulation. Each bass trap is crafted right here in the USA, using high grade cabinet plywood, and wrapped in our Trademark DMD Acoustically Transparent Fabric. All Acoustimac Bass Traps are wrapped on front and sides in fabric, and have a wooden backing. These Bass Absorber are Available in 5 colors and Include Easy to install Mounting Hardware and screws for wall deployments. They have an average NRC Rating of .95 or higher with additional absorption on the low end of the band spectrum, which makes them your best choice for treating for 'boomy' or 'muddy' bass as well as standing waves in studios or home theaters. They also have the same mid and high frequency absorbers as our 2" acoustic panels. Our Corner Bass Traps have a trapezoidal footprint to allow for a snug fit installations into corners. (You will need at least 16" of room from each side of the corner.) Our corner traps do not have a plywood backing, but their longer sides provide more than enough structural support to allow for a flow through back which provides additional low frequency absorption.
G**S
Professionally Finished and Solid
I'm just an average homeowner with a love of good movies and some fine stereo. Wanted to start treating my great/theater room for sound correction. The right and only place for my main towers is in the corner, and the built-in cabinetry creates a corner box on both sides making SBIR a problem with several low frequencies somewhere in the 300-900 Hz ranges, at least according to the calculators I have and what my ears tell me. This particular bass-trap product has a very adequate NCR across that range, and fits the corner perfectly.I chose the corner as the most likely best bang-for-the-buck since my first reflection points are vastly different on each side, and I get great wave decay due to the open ceiling (20 ft.) and back wall distance (18 ft.), and it's a trial and error project. I now have noted some recovered bass notes that were (wavelength) cancelled without the treatment, so it was a good start. After running a correction cycle on the receiver, I can run the mains on large and drop the sub cut-offs down to 60 or 80 Hz. I seem to be getting more 'fill-in' from the surrounds as well.So, yes, I'm a believer. BTW, I didn't use the Z-clip wall mounts and simply made 'feet' from 2" PVC pipe couplings that stand near each wall and each trap settles on top perfectly balanced and flush with everything.
M**R
Background noise killer
Really helps to quiet the room of background noises, allowing one to hear delicate sounds never audible before. Should have ordered this product sooner. Very well made and looks great on the wall.
M**Y
Love the DMD fabric, built more solid than most
I love Acoustimat! And found their DMD fabric to be a cut above most other brands. I didn’t find the z clips to be very useful, but it was fairly simple to cut some pieces of wood and screw some eye bolts in. The frames are more solid than any other brand. Would recommend!
B**L
Professional Acoustic Panels
These are absolutely professional acoustic panels. I have ordered several of them. I will definitely be ordering more in the future as needed. They make the room sound great.
F**T
Serious room treatment
Great bass traps that look great and mount easily.
R**.
Getting what You Need...
There are quite a few companies that will "teach" and sell you acoustic treatment. Sure, it's cheaper, or was this about how it sounds and the results We All are looking for ? Acoustimac products get you what you Need and What you Want. Well built and very fair turn around times. Get this from Acoustimac, consistantly.
M**Y
Well Made
Great quality. Arrived well packaged. They included way too many screws for installation. But better to have more than less I guess 😄
M**J
Nice bass trap
Well made better than expected.
Trustpilot
1 day ago
2 days ago
