Intel NUC NUC5CPYH, 4K Support via HDMI, HD Graphics, SATA3 for 2.5-Inch HDD/SSD BOXNUC5CPYH

Right now, this is a *very* new device. The bang for the buck is pretty amazing. Getting 4K video in something this low power (and low cost) is way beyond the previous generation of parts. It's also powerful enough to make a nice little standalone server. Drop in a 4 or 8 GB ram stick and a 2.5" ssd. This gizmo is quite responsive. I *assume* it runs Windows fine, that was not my target for this device. I brought it up under Linux. ...... and .... Intel has had the CPU out for only a little while. Linux is busy catching up with all the subtle ins and outs of the new device. That's a normal situation when a new chip comes out. Install any of the (as of July 18th 2015) standard Ubuntu builds and you will get a kernel in the 3.x series. This beast needs a kernel from the 4.x series. (If you are lost by this point, don't buy this as a Linux box right now). The issues are *not* specific to the NUC. All of the Braswell CPU based parts have exactly the same problem. It's not the board, it's simply the Linux world catching up with a bunch of new features. Returning the box and getting a new one will *not* fix the errors in kern.log. You *can* install a 4.x kernel from Ubuntu's nightly build process. They all are likely to have issues in them. Right now kernel 4.2 takes care of the video memory timeout check errors that 3.19 has when run on this device. It probably brings in a number of other interesting issues, but at least it takes care of the most obvious problems. The last post in this thread: [...] Gives a basic recipe for how to update the kernel. The exact files used in that post are no longer correct. They change far to often to keep something like that up to date. You will need to browse the folder they are in to get the current file names. If you really want to go into all this, Intel does have a NUC forum. If Ubuntu is not your favorite Linux, I'm sure that your distribution will have ways to get to a 4.x kernel. Just make sure the route is one you are willing to deal with *before* you buy one of these boxes. If none of this makes any sense *and* you want to run Linux - wait a while to buy this gizmo or any other board based on this very nice chip set. Let the people work out the issues and generate a stable released build with the 4.x kernel. There also is a bit of messy screen as Grub does it's video switching thing. I suppose one of these days I'll dig deep enough into the config files to fix it. It's also possible I'll just ignore it until Grub's "auto" feature works with the newer graphics. It's a pretty minor issue. ===== Just in case you *are* looking to install Win 7 on this box, there is a non-trivial process involved there as well: [...] Just like every Windows release ever, the install disk only handles hardware that was on the market when the disk came out. In this case it's USB3. In years gone by it was a whole variety of things. The fix has always been to get the drivers for the device into the install stream. Depending on the driver and Microsoft's whims, that can be pretty easy or (as in this case) a bit more difficult. It does indeed install (Yes, I bought another one of these...) it's just a bit of a hassle to do. Any time you put an "old" OS onto "new" hardware, these things come up .... If you take a look at the box it comes in (yes this is an edit a bit later ... who every reads the box !!!) it mentions Windows 8 compatibility but makes no mention of Windows 7 or before. The listing probably could mention this. There's a *lot* of information on the box and in the instructions (never read them ...) that might be helpful. A few highlights: Warranty is 3 years Input voltage range is 12 to 19V (will not go to ~10V for a full automotive install) The infrared sensor comes out the front panel. The power adapter says it's good from 100V to 240V AC 50/60 Hz. (Those of you on 25 Hz may be out of luck) It took exactly 4 weeks for the latest one to get from the factory in China to my doorstep. ============ Simply to save people digging through the comments: Under the kernel patch I'm running, there still is an issue with the WiFi drivers. There may be a workaround. I don't run WiFi on my box so it's not as big a deal to me as it may be to you. Some of the newer kernels have it fixed. with the incorporation of a newer Intel driver. Bios update is located here: [...] ====== Thanks to Oscar's comment below: For the wifi, download the firmware iwlwifi-7265D-13.ucode, place it under /lib/firmware and you're done. Both WiFi and Bluetooth work ok (at least in Ubuntu with 4.1.3 kernel). Direct download link to the firmware: [...] There is now a way to take care of the WiFi and Bluetooth drivers on Ubuntu. I suspect it also works on other versions of Linux. I'd say that's enough (plus Win 10 being out with all the drivers) to bump it up a star. Even if you NUC is dated *after* the bios release date, it probably does not have the latest BIOS. It's always worth checking. Bob

Purchased this (along with an Samsung 850 EVO 120GB SSD and Kingston 8GB SODIMM) to replace an aging home-built midtower HTPC in a bedroom, with the intention of using it pretty much strictly for Kodi, Amazon Instant Video, and a Steam streaming box. Because of this I opted for a Linux install as Windows would be overkill. I prefer Windows but am familiar enough with Linux that it was little trouble. Note that out of the box this had BIOS rev. 27 installed, this was updated to rev. 31 before the OS install. Ubuntu 15.04 installed easily via USB and runs with no issues. Note that until 15.10 is available with the 4.x kernel (I believe late October), the Cherrytrail GPU support has some issues, but no obvious showstoppers except for Steam (more below). My media storage is a headless Windows box with a RAID setup and a MySQL database to sync multiple Kodi clients. Everything went perfectly with Kodi and it performs wonderfully playing remote 1080p HD. This was my main concern and I couldn't be happier with it. Firefox runs like hot garbage at this point - it may be an artifact of the GPU support issues in the 3.x kernel, but I'm not sure and don't really care, because right now not play back Amazon Instant Video in HTML5 and requires using a 3rd part repository to get Flash playback working - which runs like crap anyway. Installed the latest stable Chrome (not Chromium) which runs like a champ and plays Amazon in HTML5 with no issues. Steam install took a little doing, but this is a Linux thing and nothing specific to this machine. At this time Steam streaming is definitely affected by the GPU issues - the stream will work, but video decoding is hosed. I installed FTL locally and that runs fantastic however. I hope the GPU fixes in the new kernel will get the streaming working. This was a "nice to have" item and not a dealbreaker. All in all this little guy is fantastic. It's almost completely silent, and looks attractive - or can easily be hidden pretty much anywhere you want. The performance and build quality at this price point is shockingly awesome. I'd expect with Windows 10 I wouldn't have run into the few minor issues that I did. I'm an instant believer in the NUC after this - we had intended to give a rebuilt Ivy Bridge desktop as a Christmas gift for the SO's mom, but now I will absolutely be going with a new i3 NUC instead. If you are looking for a more robust HTPC solution than a Roku/AppleTV/etc., you cannot go wrong with this, and if you don't mind a little tinkering, it's trivial to get Ubuntu (or OpenELEC or you distro of choice I'd assume) up and running.

Por ahora todo va de lujo. Me costó un poco dar con la distro que mejor se ajustara para un pequeño servidor linux. Funciona a la perfección como mediacenter dlna, centro de descargas y como pequeño servidor de desarrollo. Lo he configurado como un single node cluster de kubernetes/docker con rancher a ver cómo lo llevaba y he de decir que me ha sorprendido gratamente. Todo ha funcionado sin problemas a la primera y sólo está consumiendo alrededor de 1gb de ram y 0,5 cores con el dlna y el torrent en docker. Con el módulo de 8GB de RAM, aún le sobran 7GB y 1,5 cores ;) Por tanto, un 10 como mediacenter y otro 10 como centro de trasteo 24/7

たぶんWindows系だと世代的な問題も出てくると思いますが、AlmaLinux9.3で問題なく動作します。 BIOS設定画面が無駄に高解像度なせいで、小さなモニター繋いで表示されなくて焦りました。 取説の類いが何もありませんが、部品の欠品やコネクタ破損などはなく、まだまだ現役で使います。 同じものを過去に使ったことがあれば普通に使えます。

Esta mini pc tiene un tamaño y peso muy bueno y viene con soporte para la pared incluido y funciona de manera my fluida solo debo especificar que el modelo que yo compre venia sin RAM ni disco duro, el empaque excelente y su funcionamiento muy bueno yo al uso como emulador retro y centro multimedia y funciona de maravilla muy recomendable.

Bon produit à la puissance suffisante pour installer volumio et créer un mini nas musique. Bien pensser a faire la maj du bios directement du site intel.

Good for day to day tasks and have a capable hardware. Coupled with good quality RAM and a SSD, it can perform well for browsing, video playback and office. A lot smaller than expected. Looks good and every thing works out of box with ubuntu 16.04. no driver issues. For windows, drivers are easily available in Intel site. Just don't expect gaming and i5 class performance . We get what we are paying for.