Vallejo - Surface Primer Color | Black Acrylic Primer 200 ml (6.76 fl.oz.) | Matte Finish and Fast Drying | Perfect for Airbrushing and Great Adhesion to Figurines and Scale Models

This stuff really is great. It sprays smoothly and gives solid coverage with excellent adhesion to 3D prints and miniatures. The quality is obvious from the first use. The finish is listed as matte but I would describe it as a very subtle satin instead. It dries to the touch quickly but giving it about 24 hours to fully cure makes a big difference. Once cured it becomes rock hard and extremely durable. I ended up returning it only because I wanted a completely matte finish but it might work out perfectly for you. Ps. In the picture of the left is with the primer and the right is without. I 3D printed this part with PETG filament.

Vallejo Black Mecha Primer is hands down the best black primer I have used. It is nice and thin, goes on smoothly they an airbrush and can be mixed with thinner for a great consistent application. It’s thin enough to where you can even brush it in and not lose definition in a model. It is a great Vallejo black and will give you great shadows w out having to use a black paint if needed. Best primer ever

Flows well and goes on smooth. Easy to apply with brush. Color is very dark and covers well

After running into problems with other colors of primer I was a hit hesitant to try this one but decided to give it a go as I do like the Vallejo paint. Once I loaded this up into the airbrush I was pleasantly surprised to see the paint Flow easily with no problem and no clogging at all during my session. I was able to cover a particularly large piece and the coverage was great, it adheres perfectly to plastic. Best thing was I didn't need to add anything to it so it was a really easy process. Additionally I was able to use a brush with the primer (wanted to test it out) and still worked out fine. Would definitely recommend!

I received an airbrush kit for Xmas. Vallejo primers work great with it. After tweaking the psi, and trial and error, I was able to prime a dozen miniatures with ease in 30 minutes. Although the bottle states it’s airbrush ready, I did find that cutting the primer 50/50 with Vallejo airbrush thinner works much better than straight primer alone. No tip dry with the 50/50 mix, whereas I had to clean the needle repeatedly with the straight primer. It’s a good idea to grab thinner if you’re going to use this with an airbrush. Even though it’s designed for airbrushes, the primer can also be brushed on if you don’t have one. Either way it beats using rattle cans to prime and varnish. I will be buying the white and grey primers, and a matte varnish from Vallejo as well.

This primer works fantastic in the drybrush right out of the bottle, it very easily sprays on a nice coat that's not too thick or thin and dries fast (but not too fast). The primer seems to have a decent amount of "tooth" to it and paint sticks to it pretty good. It forms an extremely durable layer that is very difficult to stretch or tear once fully cured. My only issue is that I repeatedly noticed that after I had primed a piece and let it dry to the touch, I would set it down to cure and then the next morning I would find a few places here and there where the primer had flaked off. I'm always careful to make sure that the pieces are clean and dry before priming so I'm not too sure what the issue could be. Regardless, it's easily touched up again.

Probably the best airbrush primer I've used. Doesn't gum up easily and dries relatively quickly.

I can spray this without thinning in my airbrush and it works perfect. I’ll stick to this stuff. I also have the gray one for when I need a lighter base.

Il primer in questione -Nero- fa parte della linea di base della Vallejo differenziandosi per alcuni, piccoli, aspetti. Difatti, le principali alternative offerte da Vallejo -per la linea aerografo- sono i Mecha e il Nero Glossy (Nero lucido). -Il primer MECHA è progettato per essere resistente ai graffi e all'usura -chiaramente in relazione al modellismo. In generale, le recensioni dei Primer Mecha sono molto positive e alcuni li prefereriscono per l'alta capacità di aderenza al modello. -Il primer Nero GLOSSY (nero brillante) è principalmente utilizzato per dare un fondo, appunto, lucido sul quale utilizzare una vernice metallizzata. Personalmente ho trovato questa procedura ottima con il cromo,l'argento, l'oro e il bronzo (sempre vallejo, ma varie linee), tenendo conto, però, che chiaramente il risultato sarà più scuro. - Il primer Nero di Base -ovvero, il prodotto in questione- è ottimo per tutti gli altri utilizzi nel modellismo statico. Mentre qualcuno tende a preferire comunque la linea mecha, devo dire che non ho avuto alcuna difficoltà nell'utilizzare questo prodotto sui miei modelli e la tenuta è ottima. Per tutte e tre le linee in questione, bisogna tener conto che questo primer NON è un riempitivo e che, come è ovvio, tende a lasciare parecchi residui nell'aerografo. Cosa normale, dato che stiamo parlando di un primer, quindi più denso, viscoso e "aderente" di una vernice normale. Può essere diluito con il thinner vallejo, ma in minima parte, per evitare di danneggiare le proprietà del prodotto. Assolutametne consigliato.

Love the product. It's good for resin surface those who are looking for primer to paint resin model, this is the go to product 👍🏽

Great coverage and better then buying a bunch of small bottles.

It's my go to primer for resin printed models. The coverage is good and the satin finish is perfect for what I need. It is a bit pricey from this vendor as local stores sell these for about 400-600yen less, but I suppose you pay for the convenience of delivery.

I bought this to really dive into slapchop painting for D&D minis, which has been a lot of fun. It provides a great, consistent base after a few coats and has really sped up my process when using slapchop.