W11106747, W10340443 Washer Door Bellow Boot Seal Gasket Compatible for Whirlpool

Just as good as the original. As you can see from the pics this was 10 years of heavy use. I tried everything to clean it but it was nasty when on the inside and it was starting to leak. Leave it out for a day to regain its shape. Its was pretty easy DIY, just make sure you have the spring removal tool and keep track of the right screws (i labeled little baggies). Perfect fit and functions like new!

Easy to install. Fits great.

We recently had to replace our front loader door gasket/boot for our Whirlpool Duet WFW8640BW1. I have replaced a gasket on a very similar door previously and had a real hassle of a time doing it, but one of the other reviewers had suggested a link to a repair video from Repair Clinic (there are many others) that shows using a spring clamp (or a few) to hold the spring and gasket in place while you are stretching it around.This is a repair that is within reach of most Do It Yourselfers (DIY'ers). It's really odd how Whirlpool designed some of this, because it requires so many panels to be removed, but while you are doing it you definitely want to clear the large plastic cylindrical trap that's just below the door. We found a bra pad! and several coins that had slipped between the baffle into the washing drum and gotten sucked into that filter, and were therefore slowing the drainage. Just be sure to take care of that while installing. Follow the video closely for removing (easy) and attaching (hard) the gasket/boot. The spring clamp requires two pliers to pull the spring apart and reattach it, and the tension on the wire will want to pull the boot off the metal rim where it attaches. Therefore this may be easier as a two person job, but I was able to complete it on my own with the clamps. Exercise patience at this step, and once complete, the rest is easy! Also make sure the drain holes on the bottom are aligned with the washers, as it can twist during installation.Altogether this is well made, seals the door well, and is a great savings and extends the life of your washer. Very pleased!PS, another tip to extend the life of the door seal, if you aren't already doing it--be sure to leave the door open to air dry after use and wipe out mold/mildew from the rubber periodically to keep it in good condition.

Easy to install. Worked perfectly in my washing machine. Had to replace the original due to staining.

My wife and I were very careful removing the old and installing the new. Like others, we let it sit in the sun for a week to reform to its natural shape. We were careful with the installation and were successful. It never leaks. But the water does not drain better than the old and it stains where the water (not much water) pools at the bottom of the gasket. Air dries the water, but the stain remains.Judging it by what it is, it seems good. It keeps our laundry area dry. Our clothes are clean. But if you are a neat freak, don't expect it to be a better product than the OEM product.

This is good quality rubber and is easy to remove from. Your washer. Works just fine no problems with it.

Direct replacement, fit great modeled exactly like the old one.Replaced the old one due to mold. And a leak at the bottom of door glass. This one solved both those problems.

Perfect fit, arrived one day earlier than promised. Couldn’t be happier.