تسليم إلى Israel

للحصول على أفضل تجربة احصل على التطبيق

قم بتنزيل التطبيق

نحن مصدر العناصر من

الإمارات
UK
الهند
USA
اليابان

خدمات العملاء

معلومات عنا

دعم العملاء

Didymium Clip-On Flip-up Safety Glasses for Lampwork, Beadmaking PT-3

Didymium Clip-On Flip-up Safety Glasses for Lampwork, Beadmaking PT-3

Q: I have eyes set close together. Do these adjust closer together ? Or will the nose piece be in my eye site?

I have a Pupillary Distance (PD) of 62. I'm a short (5' 5"), 28 year old male who has to buy glasses from the kids section. That being said, these clip ones fit my glasses well. The glasses that I wear daily have a lens width of 47mm and a height of 24mm. The lenses on these clip ons have a width of 49mm and a height of 32mm. The lenses are well sized for my glasses. I like that they are slightly larger than my regular glasses because they cover more area. However, my only complaint is that the bridge width is 20mm. My regular glasses have a bridge width of 16mm. This means that there is a small portion of my glasses that aren't covered by the lenses of these clip ons. If your PD is close to mine, you should be fine. If you don't know your PD you can measure it yourself using a ruler with millimeter marks or a set of calipers. Just measure the distance between your pupils (the black center of your eyes). I hope this helps!

Q: Can I use these didymium clip-ons and the #3 clip-ons simultaneously on prescription glasses for boro work?

I'm not sure about the #3 clip-ons, but I use these didymium clip-ons with my prescription glasses for boro. Only issue is if using high heat on colors that burn bright, not quite dark enough. Works great for most day-to-day torch work.

Q: Has anyone had issues with these scratching their rx lenses?

I've never had an issue and I was wearing them several hours a day - I did use them on my previous pair of glasses since they fit better, so they may have been already scratched a wee bit.

Q: How thick are the lenses, and how do they compare to didymium shade #5

Hi, these are about 1/8 inch thick. There is no didymium shade #5. You must be thinking of green shade, or ACE #5. Those are a green welding shade used for boro glass working in addition to the didymium. We carry a shade #3 that you can add to didymium. These didymium are good for soft glass work by themselves. If you intend on doing boro work, you need a didymium with an extra green shade #3 or #5 combination, or a set that has both in one lens.

4.2/5

معرّف المنتج: 19324690

معاملة آمنة

يُشترى معًا بشكل متكرر

Devardi Glass Didymium Clip-On Flip-up Safety Glasses for Lampwork, Beadmaking PT-3

Mashing Tweezers Glass Work Bead Masher Tweezer 8” Lampworking 3/4" Surface S.S. By JTS

Devardi Glass USA Made Pro Lampwork, Beadmaking Bead Release. 7 Ounce Bottle

الوصف

Didymium Clip-On Flip-up Safety Glasses for Lampwork, Beadmaking PT-3

لديك سؤال؟ انظر ماذا طلب الآخرون

I have eyes set close together. Do these adjust closer together ? Or will the nose piece be in my eye site?

Can I use these didymium clip-ons and the #3 clip-ons simultaneously on prescription glasses for boro work?

Has anyone had issues with these scratching their rx lenses?

How thick are the lenses, and how do they compare to didymium shade #5

الأسئلة الشائعة

ترست بايلوت

الثقة 4.5 | 7300+ مراجعات

ميرا ل.

معاملة سلسة ووصل المنتج في حالة مثالية.

منذ 3 أسابيع

سنيها ت.

وصل المنتج في حالة ممتازة. خدمة رائعة بشكل عام.

منذ شهر

عرض جميع مراجعات ترست بايلوت

تسوّق عالميًا، ووفّر مع Desertcart

قيمة مقابل المال

أسعار تنافسية على مجموعة واسعة من المنتجات.

تسوّق عالميًا

نخدم أكثر من 300 مليون متسوق في أكثر من 200 دولة.

حماية معززة

خيارات دفع موثوقة يحبها المتسوقون في جميع أنحاء العالم.

ضمان العملاء

خيارات دفع موثوقة يحبها المتسوقون في جميع أنحاء العالم.

تطبيق Desertcart

تسوّق أثناء التنقل، في أي وقت وأي مكان.

₪467

الرسوم والضرائب مشمولة

Israelمتجر

الشحن مجاني

with PRO Membership

إرجاع مجاني

30 يومًالمستخدمي عضوية PRO

15 يومًابدون عضوية