DICASALDICASAL 2" Stem Casters, Heavy Duty Swivel Stem Casters PU Foam Quite Mute No Noise Castors Markless Wheels Double Bearings and Locks Loading 300 Lbs Pack of 4 with Brake Black

We purchased these to replace on a foldable shelf. Highly recommend, very sturdy and the wheel locks work well.

These casters went on easy. I am in my 70’s and I used to have to carry this table saw out of the garage. Now it’s so easy to move it, so I can use it outside. They are very heavy, sturdy wheels. Love the locks on each wheel. Should have down this long ago to the table. Moves now like it’s on ice. Very smooth . The saw table is a craftsman brand and once I used a hacksaw to remove the original feet, that had the bolts rusted on, it was a breeze to attach the wheels. Great buy and value. I would definitely recommend this to anyone who needs to move any tool table or even heavier equipment than my old table saw.

Well made, durable. Purchased to replace umbrella stand casters!

These wheels are just short of perfect. The wheels are excellent: no noise, non-marking, solid. They rotate easily...good bearings. A very sturdy design as there is little offset between the wheel axle and the stem (so less likely that the unit will crush under extreme weight). Here are the only two issues I found. Neither were big enough for me to return, but they may cause me to hesitate to buy again and that's a shame:1) Biggest problem: the stem is poorly designed in terms of how each element is stacked on the screw bolt. In its current design (as of this writing) the wide black metal collar over the wheel has a big depression in the center. This means that the pre-installed nut screwed onto the stem rests into this depression. This leaves very little of the nut exposed beyond the collar. This means that when you screw the stem bolt onto your shelf leg, there is virtually NO space in which to tighten the bolt onto the shelf leg. The included mini wrench is a nice bonus, but even that tool is too thick to get in the space. Moreover, jamming the wrench in there scrapes the bottom surface of the shelf leg! Bad! So I had to hack the installation by adding a second nut to the screw stem and THEN installing the wheel. This, of course, gave me plenty of nut surface to tighten the wheel to the shelf leg, but this hack looks sloppy and now gives TWO opportunities for unintended loosening down the road. SInce I don't plan to load these sheles with too much weight, I think the hack will work, but if this was a heavy load project, I'd return the wheels.2) the locking mechanism is very robust, however, it is SO difficult to engage, I had to put my entire body weight on the mechanism and it was still hit or miss if I could engage it. I weigh 150lbs, so it should engage! Upon inspection, I realized that the mechanism is one of those types that has to literally "bite" inito the wheel to brake it. But given the softness of the wheel (good for silence), the edge of the brake sinks into the wheel surface, thus making the locking tab's movement arc ineffective as a lever to easily bite the wheel. This arc is naturally very limited when the wheel diamter is only 2"...if the tab were longer, it would likely scrape the floor when engaged -super bad. On the wheels where I was finally able to engage the lock, I looked at the brake and the biting edge literally sank into the surface of the wheel, making me worry that, over time, the wheel's surface could become cut and ragged and start to not roll as smoothly. So I think that either this locking mechanism needs to be adjusted to bite the wheel in a different way or an entirely different locking mechanism is needed here.

I just installed these casters on the wooden base of a digital piano that needed to be moved from office to performance hall. They came as a set of four with all the necessary hardware supplied. What a pleasure! The piano rests on a carpeted floor and now rolls with very little effort. A pleasure to use.

Dislike? Nothing to do with the quality of the product. It was the two week delay that my project had to sit idle waiting for it to arrive. Product quality A+; delivery performance F. It was not the fault of the manufacturer and there lies the mystery. It took three orders, two "lost" deliveries, two refunds, one successful delivery, one lengthy chat to get the accounting part cleared up. Anyway, that's settled now. It was OK in the end. Have no complaints anymore.These casters were for a coffee table. 75 pounds of marble top and supported by four hard wood legs. The casters move quietly and softly. Quieter than a mouse's whisper.One minor thing. I had to purchase a special hex wrench to install the threaded insert. Actually, instead of the open wrench that came with the product, the seller could have thrown in the hex wrench (which is cheap, really). I have a set of hex wrenches except for the size (half inch) required to drive the insert.Excellent product quality. Reasonably priced. I highly recommend it.

I put these on a Honey-Can-Do wire shelf unit, it should fit others - most that have 1" tubes should use 3/8" for the feet.These turn and roll real smooth. Might actually be better than the included casters on some shelf units (I don't quite trust those light plastic ones on any unit bigger than the 3-tier 2' wide ones). Included mounting hardware is for adapting objects not originally meant to use these. Also includes two thin wrenches for screwing these in - they're still cheap, but a lot nicer to use than the usual included wrenches in wheeled wire shelf units.

Pour mon moulin à scie

These wheels are super well built. Easy to install and low profile.The only drawback is the difficulty I have in locking and unlocking them. They are super hard to lift and depress. Maybe if the levers were longer it would be much easier.Other than that these really are a superior built product for the price.

Wheels are having rust and they are kept loosely in the box and has many scratches also wood insert hex nut are missing which are shows in the product image.

este es el tiempo para reparar construir remodfelar crear recrearte disfrutar de tu habilidad de bricolage. e incllusive para terapiarte encontrarte contigo tu yo creador.diviertete.

avoid these products that uses imperials and dont provide metric measurements. useless it didnt fit my desk.