Bside 1mA DC Clamp Meter True Rms 6000 Count Digital Multimeter with Back Clip (Black)

Bside 1mA DC Clamp Meter True Rms 6000 Count Digital Multimeter with Back Clip (Black)

Q: Is it true rms with the amps?

Just an FYI to readers - To clarify what they mean by True RMS. True RMS, VRMS, ARMS and WRMS is the RMS measure of both the AC + DC components, it's integration of the area under the curve. This meter measures VACrms and AACrms, so it separates the DC component. It should state TRUE AC RMS, but like most meter manufacturers, they don't. There's a lot of misunderstanding on this thanks to marketing in companies. Take a look at a Fluke 187 or 189 where they actually measure TRUE RMS, but on the meter they call it AC+DC (in Blue). Most people are fine with this, since they typically measure line voltage or clean DC (battery or SMPS supplied). However, measure a DC source with high ripple current and you will not get a real measure, such as in automotive battery chargers that use a linear charger (large transformer based, not SMPS). Knowing the True RMS allows you to properly design for things such as thermal, efficiency and safety (fuses, breakers, thermal cutoffs, etc..) and to prevent over charging or over powering a battery or device. Class 2 devices, as those that fall under UL1310, have to comply to VRMS up to 2kHz for both indoor and outdoor ratings. Landscape lighting, LV pool lighting, USB 3.x Power Port also must comply. The reason for this in LV applications is because of the breakdown voltage of the skin. How to tell, if the AC symbol on the display only has a tilde ~ it's ACrms. If it has both the tilde ~ and a straight line – above it, its RMS. Some meters (Fluke 187, 189, 287 & 289) use the DC for both DC and RMS, so it will have both if the second function feature is RMS. The Dashed straight line on the flukes means it can also properly measure pulsed DC.

Q: what is the minimum dc amperage it will measure? 1ma ?

In 6A range, resolution is 0.001A, the test range is 0.001A~6A. In 60A range, resolution is 0.01A, the test range is 0.01A~60A. In 100A range, resolution is 0.1A, the test range is 0.1A~100A.

Q: with the clamp can you measure amps in DC ?. Up to how many amps maximum?

Yes, with the clamp, the tester can not only measure amps in DC, but also measure amps in AC, the maximum amps is 100 amps with 1mA resolution.

Q: Is this basically the same unit as the Uni-T 210D?

This meter has been upgraded a lot compared to Uni-T 210D 1. This meter has higher precision than Uni-T 210D (6000 counts vs 2000 counts), especially measure current with clamp, for example, when measure current approximately 2.5A, this meter display 2.493A, Uni-T 210D only display 2.49A 2. This meter added many functions: Live wire check, Low Impedance voltage test, measure microamps μA by terminals, etc. 3. This meter has many upgraded designs: Side probe holder design for easy test, Back clip design make it more portable, etc.

3.5/5

معرّف المنتج: 735947045

معاملة آمنة

التفاصيل

Brand
BSIDE
Power Source
Ac
Style
Voltage
Color
Black
Item Weight
138 Grams

يُشترى معًا بشكل متكرر

BSIDE ACM91 Digital Clamp Meter 1mA AC/DC Current True RMS Auto-Ranging 6000 Counts Meter Hz Temperature Capacitance Live Check V-Alert Low Impedance Voltage Tester

Lisle 64970 Parasitic Drain Tester, One Size, Factory

الوصف

[1mA Sensitivity]: 1mA sensitivity when measuring AC/DC current by clamp
[Dual Line Display]: Dual line display can display both AC voltage/current and frequency or Celsius and Fahrenheit on the screen
[Enable v Warning with any function]: Press the v warning button to activate the v warning (AC voltage alarm) function in any function range
[MULTI-FUNCTION]: This true rms 6000 count automatic range clamp meter can measure temperature, capacitance, low impedance voltage, frequency, resistance, continuity, ac/dc voltage, ac/dc current and live wire check
[BACK CLIP DESIGN]: The back clip design is portable, hanging up on your belt or pocket

Features: AC/DC current measurement (min 1mA jaw) Measuring microamplifier μA (0.1μA at the terminal) Measure AC/DC voltage. V-Alert measurements, solid line check. Measures frequency, temperature, resistance, continuity and capacity Low impedance voltage measurement Frequency function clamp Automatic range, automatic power off, data hold, low battery display with backlight Conforms to IEC-61010-1, IEC-61010-2-030, IEC-61010-2-032, IEC-61010-2-033 standards. Over Voltage Protection Class CAT III 300V, CAT II 600V, Pollution II Specifications: Display: 6000 count DC current: 6A/60A/100A 0.001A/0.01A/0.1A ±(3.0%+5Count). DC current (μA): 0-200μA 0.1μA ± (0.8% + 5 count) AC Current: 6A/60A/100A 0.001A/0.01A/0.1A ±(2.5%+5Count). DC Voltage:6V/60V/600V 0.001V/0.01V/0.1V ±(1.0%+3Count). AC Voltage:6V/60V/600V 0.001V/0.01V/0.1V ±(1.0%+3Count). Low Impedance LOZ:Max 600V Resolution 0.1V Resistance: 600Ω/6kΩ/60kΩ/600kΩ/6MΩ/0.1Ω/0.001KΩ/0.01KΩ/0.1KΩ/0.001MΩ±(1.0%+3count) 60MΩ 0.01MΩ ±(1.2%+20 Count) Capacity: 600μF/6000μF 0.1μF/1μF ±(4.0%+3 count) Frequency: 60Hz/1000Hz 0.1Hz/1Hz ±(1.0%+5 count) Frequency: 60Hz/1000Hz 0.1Hz/1Hz ±(1.0%+5 count) Buzzer: If the resistance is less than 30Ω, it will sound a continuous beep. Temperature: -20℃~500℃ 1℃/2℉ ±(2.0%+2Count) Jaw Capacity: 20mm Power Supply: 2 x 1.5V (AAA) (Not included) Size: 179 x 67 x 36 mm Weight: 137g Package Includes: 1 x Digital Clamp Meter 1 x Probe 1 x Thermocouple 1 x Carrying Case 1 x Screwdriver 1 x User Manual Note: Due to aviation security checks, batteries are not included in the package.

المواصفات

Manufacturer	BSIDE
Part number	ACM91 Black
Item Weight	138 g
Product Dimensions	6.71 x 3.61 x 17.91 cm; 138 g
Batteries	2 AAA batteries required.
Is Discontinued By Manufacturer	No
Size	ポケットサイズ
Color	Black
Style	Voltage
Material	plastic
Power source type	Ac
Batteries Included	No
Batteries Required?	Yes
Item Dimensions LxWxH	6.7 x 3.6 x 17.9 cm

لديك سؤال؟ انظر ماذا طلب الآخرون

Is it true rms with the amps?

what is the minimum dc amperage it will measure? 1ma ?

with the clamp can you measure amps in DC ?. Up to how many amps maximum?

Is this basically the same unit as the Uni-T 210D?

المراجعات

3.5

جميعها من مشتريات تم التحقق منها

な**し

コスパがいいです。

まだ、数回使っただけなもので、ハッキリとは言えません。

17.03.2020

松**明

コスパ良し

想像していたよりも小型で使いやすかったです。自動車の暗電流を測定する目的で購入しました。精度はわかりませんが、他のクランプテスターとほぼ同じ数値を出していました。コスパは良いと思います。温度を測るプローブは線がかなり細く、注意して取り扱わないとすぐに切れてしまいそうです。抵抗などの関係で仕方ないのかなと思います。

30.07.2019

く**ろ

直流電流レンジは使えない

自動車関係なので使うのは直流のV A です。電圧測定は問題ないようですが、直流電流計はゼロセットしても本体を動かすだけで地磁気を計っているかのごとく指示値がフラフラして０でじっとしていません。そもそも 1/1000 まで表示させることが問題だと思います(1/10もふらつきますが)。そのせいで整数部分の精度も怪しくなってしまっています。これを信じていたらドツボにはまりそうなので「返品かなー??」と思っています。

7.06.2021

電**士

まあまあかな

今までは日置のテスターを使用していましたが、慣れていないせいか、使いにくくかんじました。自動で電源OFF機能があると有難い。値段なりかな？

17.11.2019

ハ**ピ

コスパ最高！期待以上の商品でした！

測定値も持っているテスターと殆ど同じ。思ったよりコンパクトでデザインも良く持ちやすく使いやすい。これ一つで結構いろんな事に重宝しております。それなのに価格も安く注文から2日で届いたのにはビックリしました。とても良い商品を売って頂き感謝いたします。

14.09.2020

الأسئلة الشائعة

ترست بايلوت

الثقة 4.5 | 7300+ مراجعات

أنجالي ك.

جودة المنتج رائعة. بالضبط ما كنت أحتاجه لعملي.

منذ شهر

أنیتا ج.

تجربة جيدة، لكن كان يمكن تحسين تحديثات التتبع.

منذ شهرين

عرض جميع مراجعات ترست بايلوت

تسوّق عالميًا، ووفّر مع Desertcart

قيمة مقابل المال

أسعار تنافسية على مجموعة واسعة من المنتجات.

تسوّق عالميًا

نخدم أكثر من 300 مليون متسوق في أكثر من 200 دولة.

حماية معززة

خيارات دفع موثوقة يحبها المتسوقون في جميع أنحاء العالم.

ضمان العملاء