Rough Country 2" Leveling Kit for 1999-2004 Ford Super Duty 4WD - 49800

Install was pretty easy, everything went together good and fitment was good! Do not use lift blocks, use leaf packs like this kit has! U bolts fit nice and snug! Installed on a 2003 f350

The first 2 photos are stock to level with 33s. The second 2 are leveled with 35s and with the Ready Lift 66-2094 4” rear block kit which added about 1.5” to the rear(I measured after I put my water tank back in, but it’s empty).For the record, I have a 2000 F250 7.3 and needed a track bar. I bought the Freedom Off-road adjustable track bar for 2-6” lift. An impact driver will make your life 10x easier and if you don’t have one, buy one or rent one. Your track bar nut has a locking piece on the nut so attack it from the bolt end. It’s hard to see at the top. Also, remove your drag link at the bottom to make it easier to get to the bottom of the track bar.Clamp your leaf springs before you remove the nut on top.This ended up being a 3” lift. It’s not going to settle either. It’s a short spring pack. It’s stacked metal that’s like 12” long. If you don’t want a 3” lift you can remove leafs and cut the bolt down.Overall, I highly recommend and I’m happy with the result.

Great kit easy to install. Makes truck sit even and looks great. Only down side was the instructions give out wrong tool size. But overall great kit

Great product, my mechanic installed it for 150 bucks, and he said it all went together just fine! It leveled out my truck perfectly. Yes I would recommend this leveling kit.

Installation of this kit is easy and very straight forward , I did it start to finish in 1.5 hours. It leveled out my truck exactly three inches , just what I needed. I highly reccomend this leveling kit , though I'm a mechanic it is simple enough for the average guy to do in an afternoon.

Works great and looks great but it was a lot harder to install then I ever thought it would be.

Perfect lift! Pickup isn’t too high in the front like I see with some. Came out level. I’d suggest having a second person to speed up the job. I spent 6 hours on the installation. I didn’t hurry or hurt myself.

Incorrect u bolts. The bend was not flat enough for proper fit. The majority of rhe work was already completed when I noticed they did not fit securely. I will have to replace them when I obtain the correct ones. Not a safe or secure installation at this time. 1999 F250 4x4

Good quality I just needed longer centre pins for my application but I knew that before hand. If you have a normal 2 leaf pack the stock pin will work for you fine 👍

Definitely lifted the truck 2" if not more. Not too high, just right.Some grinding needed to get part-fitment 100%Get an adjustable track bar if you don't want to have to fight getting the passenger side lined up, otherwise I used a friend and an 8ft 2x4 to line up the axle.

good

Fit perfectly and was a fraction of the price of my local automotive store

Parfait