Rust-Oleum 248918 Automotive Enamel Fabric & Vinyl Spray Paint, 11 Ounce, Gloss Black, 11 Fl Oz

Worked well to revamp my old sub box.

I was restoring my old '78 Mustang, starting with a bunch of mismatched interior panels and door-skins taken from several different cars. Some were tan, some were blue, and a few were red. I picked the black vinyl dye assuming it would most easily cover the different colors. I used it on fabric, soft vinyl, and harder vinyl (the dash). I cleaned the panels as recommended and then started with 3 light coats. The first barely looks like it's covering and is semi-transparent, but the adhesion promoter is at work. It flashed very quickly and I lightly coated a few more times. My last coat was heavier to get a nice even look. I coated the entire interior and didn't have a single chip, scratch, or run. The dye showed all of the vinyl grain through, but none of the underlying color. My interior turned out beautiful. The end-result is tough and chip-resistant. At one point I ran out of the Rustoleum and switched over to the Duplicolor they had at my local auto parts store. Duplicolor covered in fewer coats, but the end result was far less durable and easy to scratch. To do this properly and with the right number of coats, you'll probably want about a can per large panel. I went through two cans on the dash for example, about 8 cans total for the entire interior (minus the carpet which I chose to replace instead).

Used to paint a Pontoon cup holder to use in my car's back seat. The color is the darkest gray I could find and it matched my back seat fairly well. It was easy to spray and stuck to the vinyl with ease. While painting the bottom I did not shake the can as well as I should and the paint was a bit runny. However, I was satisfied with the results despite my inexperience with spray paint. The cup holder is still soft to the touch and seems like it will keep the paint well.

I loved how it was turning out , but I have to use a whole can just on half of the chair .. I HAVE 4 CHAIRS lol, it's very easy to use , the color is PERFECT. The smell is very loud and lingery, but over all I loved the product just not the price for the can. The quality is definitely worth it if you have a small project.

the fact that it was a spray was outstanding! I cleaned the surfaces with vinegar and then allowed them to dry in the sun. When dry and after shaking for 20 minutes, I began the process and it came out spectacular. After 24 hours of setting, the chair was reassembled and now we will see how well it holds up to usage. I really hope it holds up under normal use! If so, I will be ordering other products for projects. THANKS.

As you can see, same material but different results. I wanted black like on my first project and like the color of the cap, but as you see they are very different in color. I've tried to reach out to both Amazon andRust-Oleum to get help with this since it seems it can't be returned. With Amazon I can't seem to get any help and I'm not getting any response from Rust-Oleum. So I guess I'm stuck with something I can't use.

I used this spray on interior plastic and also the fabric of the sun visors to match a new charcoal headliner. I got this product and also the Duplicolorr charcoal grey. To compare the two the Rustoleum is a bit lighter and has a slightly more green tint in it. it is a strange color to me and did not match the rest of the car well when used on plastic moldings. However, luckily the rustoleum is a bit lighter color on the fabric so on the sunvisors it more matched the headliner since. The duplicolor came out a bit darker on fabric than when painted on plastic. The duplicolor charcoal color was more of a match on the plastic. I think the duplicolor looked smoother on the fabric, but it felt rough after i sprayed on the plastic (but I sanded the plastic and that is why i think.) They are kind of different thicknesses. I think the duplicolor was a bit thinner and less gluey and easier to work with in general and did not gloop or pool up as much as the rustoleum, One thing I would do different in the future however is I would not sand my plastic. I sanded everything and everything came out rough. in the future instead of sanding i would really use a special cleaner on plastic and also a special adhesive spray before painting the plastic. I saw that on a you tube video. Sanding was a mistake for the texture is really rough. luckily the parts i was doing was not the dash itself but the inside windshield plastic moldings which is not something someone will touch. both of these sprays do not seem that durable unless you really clean and use a primer or adhesive. It did adhere very well, but i imagine if i am taking things inside and out of the car and it pumps the plastic this will chip off. I also would consider plastidip for some areas as I like the texture of that.

I bought a faux leather chair on craigslist for $30 but I went to pick it up and it turned out to be off-white / cream, whereas the rest of my place is pure white. Naturally, this simply would not work. I found this all-purpose white spray paint and it was perfect. I ended up using it to paint some wood on a desk that I built, too. So far I've sat on the chair consistently and don't see any rips or abrasions. I would say that you should buy two, because they run out faster than you would expect, especially if you're doing 2-3 coats to really get that stark white look. But, it's still so much easier and cheaper than painting with a brush, with cleaner, more consistent results. I don't think you'll be disappointed with Rustoleum.