Auxbeam XP-Ultra Series Hyperspot LED Pod Lights, 3 Inch 80W 9600LM Spot Beam Offroad Lights, Amber White Lens Covers, 30° Spotlight Fog Ditch Lights, for Motorcycle Jeep Toyota 4x4, Pair

If you're in the market for LED fog lights for your 5th gen Toyota 4Runner, look no further than these Auxbeam pod style fog lights. Bright, well built, and they're plug and play!BUILD QUALITY & HARDWARE:The lights themselves are made with cast aluminum and feel sturdy, heavy and seem to be well put together. There are two mounting points on each side of the light and the kit comes with mounting brackets and all necessary hardware to surface mount your lights. It also comes with a wiring kit, which I did not use. I also purchased the Tacoma/4Runner kit which came with new bezels, mounting hardware and pig-tail adapter that adapts from the Auxbeam deutsch style connector to H11. The kit comes with two lenses, one amber/yellow and one clear. Behind each lens is a soft, what feels like silicone, seal which sits in a groove in the aluminum housing. I have faith that these will remain water tight as long as the seal is installed properly in the groove when changing the lens (check the gasket and allen screws before installing). My only real gripe with these lights is the paint/powder coat is inconsistent. The cooling fins are not properly painted and there are definitely lighter areas that don't have a complete coat of paint. If you're installing these behind a grill, in a bumper, or foglight housing, its not going to be an issue.INSTALLATION/TIPSIf you are installing these on a 4Runner, be aware that there are NO INSTRUCTIONS provided by Auxbeam and there are only a few videos online to guide you through the installation process. Anyone with a little DIY knowhow can figure it out, but it would have been nice to include a quick guide, pictures, or instructions.If installing in a 4runner's factory fog light housing, remember to rotate and instal the bezel 90 degrees so that the larger part of the bezel is facing towards the center of the truck when you instal the light. You will also have a little play, like 3/16th or less, to manipulate the light and reduce gaps. Don't tighten the two screws until you're satisfied with the gap and a second pair of hands would be helpful. The passenger OEM foglight on 4runners is covered by a rear plastic shield which can be a pain to remove. Undo 3-4 clips that hold the the front foglight plastic bezel, move it out of the way a bit and undo the shield clips from the front and it will pop out the back. I am satisfied with the fitment (see pics) as I was able to get the passenger side light dead on, but struggled with the driver side. For good measure, I added clear high temp silicone to properly set the gasket in the groove before assembly and added dielectric grease to the connectors to prevent corrosion.PERFORMACEOkay so these lights exceeded my expectations. Light output has to be at least equal or greater to my retrofitted LED headlight bulbs I installed last year. I opted to install the clear lenses as I needed more visibility on rural/forrest/desert roads as opposed to inclement/dusty weather and I don't off road at night. Without any kind of diffusion, they throw light high into the trees and well out towards the sides, illuminating the side of road. It's "brute force" lighting with little light control. The included amber lenses are split with a diffuser only at the bottom and I would think that might give you a little better light control. I'm happy with this set up though as it increases night visibility exponentially. I'm satisfied with the color, they don't quite match by headlights and I would guess they are just below 6500k.CONCLUSIONIf you're looking for reasonably priced LED pod-style fog lights or you want to replace those terrible 4Runner halogen fog lights, these are a good bet. I won't speak about longevity as I've just installed them but for the price, you get a lot of light output. I'm now looking to buy another set and install them with amber lenses behind my grill, they are THAT good.

I got these because they match my headlight theme, sort of, anyway. I like the spot liggt festure and the wide agle secondary, I wish there was a way to make these work better as fog lights but. They are CRAZY BRIGHT YALL brighter than 100wat hid headlights. With the light bar, ima make them come on together with a secondary button to shut off the bar. When i turn on the fogs.Great. Perchase by far

These are actually quite bright. My wife has Baja LP6 and honestly these aren't a whole lot less bright, but a whole lot cheaper. The day time running light is cool and they can also be a turn signal if you take off the factory fenders.

Lights up 100 times brighter than headlights alone. Color is the same as daytime, probably 4000K. I mounted them on my 2025 Bronco using Seven Sparta Dual A-Pillar Light Mount Off-Road Ditch Lights Mounting Brackets Compatible with Ford Bronco Accessories also found on Amazon. The only issue was the mounting bolts are too long. I had to hacksaw them shorter so they would clear the bracket and truck.

Great fitment, super bright, plug and play, only issue was I wish it came with instructions. It took a good bit to figure out how the brackets will fit and adjust the mounts brackets.This how it came out and was installed

These are freaking amazing. I go wheeling at night and buy does these make a difference. Buy them now! Great value for the money. They're easy to use once the setup is complete.

This is my second set of 6 function lights from Auxbeam. No complaints so far. The strobe feature works great and are super bright.

So nice, put one side by side and they are bright and look great