Thermal GrizzlyMinus Pad 8 - Self-Adhesive Cooling Conductive Thermal Pad - Elastic and Adaptable Silicone Thermopad CPU/GPU/PS4/PS5/Xbox

There's multiple videos and articles that will show how these thermal pads are nothing special. Other pads will do a better job when it comes to lowering temperatures/fan noise.Two examples are: Gelid Solutions GP-Ultimate and NAB Cooling NB Supermax. Although the catch is that these two pads are harder to apply. They're brittle so it's easy to break them apart and almost impossible to reuse them because of this. The Grizzly pads are far more flexible and can be reused, but their cooling performance is considerably worse.If you just want to lower temperatures or fan noise and don't care about reusability, get either of the Gelid or NAB pads instead. Both perform and feel exactly the same so just get whichever one is cheaper or available. But be very careful when handling them.

Used on my Nvidia a2000 rtx card. Installation was no issue atall. All appears to be ok. Used on a youtube reccomentation.

It’s okay but a bit to thick to use with laptop

Used for ps4 fatEnough to cover all 8 chips around central unitEasy to cut

I think the pads will do a better job , but being connected with gpu on same heatsink it's not ideal. The memory chips will get more heat from gpu! Pricey for what you getting!

I came here after watching a youtube video on how to make my PS4 Pro run quietly. I had stripped my console right back a few times in the past to remove dust which collects in the heat sink, but the jet engine kept coming back when graphically demanding games were being played, so I figured it was time to do something about it! This product is excellent when bought together with the Thermal Grizzly compound. What you will notice when replacing the thermal pads is, the originals are tiny and not adequate. The first set you replace on the memory chips are small, so be careful to take your time getting them cut just right. The second set of pads you replace under that aluminium cover are going to be much larger than the originals, these are much easier to fit. I gave it a good test today and its silent! This product really is the muts nuts. One thing I would suggest BEFORE you fit these is to strip your console right back and clean that fan and heatsink first. Take your time and have a black marker to help you remember where the black screws go.If you already know what your doing then just buy this stuff! You cant even compare it to the original junk thats on there. You even get two strips in the pack!

Thermal grizzly, a brilliant company who know what they are doing. TL:DR This is a good productI had an old asus laptop, an N55SF to be precise, that was constantly overheating, its i7 4th gen processor clocking down to 800mhz, so i removed the cpu cooler, applied liquid metal and noticed the VRMS were cooled with thermal adhesive glue rather than pads, akthough it can be argued they are more thermally conductive it is important to note that they do not fill all the micro cracks and imperfections in cooliing plates and even the cpu/gpu die's themselves micro air gaps cause heat build up.Using Isopropyl Alcohol, some cotton buds and a lot of elbow grease I cleaned it up, applied liquid metal and then on the VRMS used these thermal Pads to replace the adhesive.Lo and behold the temps were at 82 degrees under full load while hitting 4.0ghz boost on all 4 cores.

Works brillant on xbox one x my sons was freezing and shutting down even after good thermal paste aplyed but after swoping the original pads out to these ones now been running over 10hr and been ok nice warm air coming out back so dispersing the heat correctly my only gripe is why are they so expensive 36 quid for a littlle square u would probs get about 3 to 4 xboxs out of one square like as i only used probs a quarter and did all chips including tje south bridge.So all in all end result is if u want a nice quite cool running xbox one x i recommend u get these hope this helps someone