Printable Vinyl - Sticker Paper for Inkjet Printer for Epson (Glossy, 25 Sheets, 8.5" x 11", Anti Jam, Waterproof) - Make Labels and Decal

This vinyl sticker paper is fantastic! The 8.5”x11” sheets are the perfect size for creating custom designs, and the print quality is exceptional. The colors come out vibrant and crisp, with no smudging or bleeding. It works perfectly with my inkjet printer, and the adhesive is strong without being overly sticky, making application smooth and easy. These sheets are versatile and durable, holding up well to light water exposure. I’ve used them for everything from labels to craft projects, and the results are always professional-looking. Highly recommended for any DIY enthusiast or small business!

I LOVE the quality of this sticker vinyl. I dont know what I was expecting but it wasn't this. It's slightly thicker than regular sticker sheets. It's clear but when you hold it up, it has a milky white color. It shows up clear on light paper but may show up on darker paper. The quality of my print is beautiful! (I use an HP 2800 series printer, nor sure if thats part of the good quality.) It kind of reminds me of PET stickers but just better quality! It hasn't jammed in my printer. It is smear resistant ONLY if you print on the "PHOTO PAPER" setting. I wasted 4 sheets before I read the packaging with the suggested setting. It did tear but only after me pulling at the sticker because my dull blade didn't cut all the way through. I stuck a sticker on a bottle and ran it underneath hot & cold water. The ink didn't smear but the sticker came up pretty easily. So it isin't 100% water resistant. I only intend to use my stickers in my planner so it works for me and I recommend it!

I bought the clear type sticker from another company unfortunately the color bled some with a little moisture. The image also showed through when I layered the stickers on top of each other. So I had to rip them off the cup I was working on. This is the same cup I used the transparent sticker that didn't work. So right away I ordered the glossy white sticker. This is my first time ordering this brand so I will have to see how durable it will be but for start, I was able to finish this cup with a clean and terrific outcome. The cup has the original striped lines going down baked into it. So I designed a black and polka dot strip to go around the 4th top of the cup and then I printed a red polka dot bow. That's for the front of the cup. On the back the side that faces me when I use it I printed my favorite Bible verse, Isaiah 60.22 in cursive.I am quite satisfied with my finished product because it's exactly how intended it to look when I was done. Here's to many many more projects in the near future for me using this glossy white sticker.Here are my tips from trial and error:1. Transparent stickers are good for clear glasses or cups or when you want to write colored texts because the background disappears with the clear glass.2. I applied/sprayed two to three rounds of sprays over the print on the glossy white paper as soon as it came out of the printer. I used the Rustoleum clear seal spray. It seals the ink of the image that came from the printer. An added assurance for making it waterproof. I waited about half an hour between sprays.3. This is just me from my experience with using waterslide transfer papers into cups and dishes that I have to use daily and wash regularly but to me, this is the most important part of the project. I use the MOD Podge dishwasher-safe sealer, apply it to the dry and sealed image on the cup. I just use a regular paint brush and brush thoroughly but lightly not to create paddles. Then I wipe the excess outside the images with clean rag around the images. In my experience, three applications of the Mod Podge are enough to seal it for solid waterproofing and durability of the images. I wait a few hours between applications. After this, if you want you can place it in the dishwasher. But for me I just chose to handwash all my DIY cups just to be on the safe side. So far the ones Ive done with waterslide are still going strong and I use them every day. The Mod Podge label is in sea blue.4. I am now drinking green tea on my polka dot cup and it has gone through its first handwash with no problem.5. I don't have Cricut, but scissors and patience are good enough.

I’m an artist and recently started making stickers with a Cricut at home and wanted to give this a try. Previously I was making stickers and cutting them by hand. While this paper is pretty good there were a couple of things that I wasn’t super happy with.Thickness- while I know this product is meant to prevent paper jams in printers, I personally found it to be a bit too thin. I would have preferred a thicker material since I feel that it makes stickers seem more substantial and of higher quality. Even with an added laminate layer it was still too thin for my taste.Smearing- this was the first sticker material that I’ve experienced smearing with. I did use my system dialogue to print with glossy photo paper settings which helped, but it did continue to happen from time to time.Backing- this one is minor but was a bit of an inconvenience. This material is barely different in appearance from front to back so I always had to triple check that I was loading it correctly. If the back paper had even a small pattern on it it would have been much easier to use.Overall this is a decent product, and if you’re just making stickers for fun this could be a good option for you! If you’re looking for a material for something you want to sell maybe consider looking elsewhere.

This sticker vinyl (I got the clear) works great. I found you have to only put 1 sheet in the paper tray of your printer at a time or it will jam. Other than that, I am very pleased with this product. My ink did smear, however, I ended up laminating the stickers and them cutting them on my machine. They are glossy and that's what I was looking for.. I definitely recommend them.