SuperStroke Cross Comfort Golf Club Grip | Soft & Tacky Polyurethane That Boosts Traction | X-Style Surface & Non-Slip | Swing Faster & Square The Clubface More Naturally

Have been using the Super Stroke putter grips for years. With great success on feel and durability. So I decided to replace my mid sized Winn Dry Tac grips on my driver, hybrids and irons. I play 5 days a week and would have to replace my Winn grips about 3/4 of the way through the golf season. I absolutely love these new Super Stroke Cross Comfort mid sized golf grips. They are soft and tacky, and do not slip in my hands at all. I do not play golf with a glove on and these grips do extremely well if you’re playing in rain, or if you’re sweating due to hot weather conditions. Have not had any club slip or twist in my hand, thus far. At $5.99 for each grip, I believe it’s a great price for what you’re getting. Very satisfied. Hope you all have a great golf season!

These are very good, if you like a soft and tacky feel. Quality made, good price. Be careful regripping, they are a bit harder to slide on versus say a regular Golf Pride or a harder compound grip.,

Bottom Line: A key to install is coating the inside of the grip by plugging small hole end with a finger, add solvent, plug larger opening with other hand finger and swish back and forth while rotating the grip. Then empty solvent out the small hole into the grip over a paint tray.Details:The grips are great. Being soft grips, they will wear out quicker than Golf Pride, but I much prefer this feel. It’s similar to Dri-Tac.These are definitely harder to install. My struggles and then success:Attempt 1:First attempt was without a vise, as I have always done. I coated the tape in the shaft with solvent and then coated the inside of the grip by moving the solvent tip around the inner edge of the opening. I did not plug both ends and swish it back and forth (later realize this is a key mistake).I really struggled just to get the end of the grip over the edge of the shaft and then really struggled to get the grip on. All the “goo” from the tape was piling at the end as I pushed. I finally got it, but was risking bending my club head.Attempt 2:I ordered a vise that clamps to a desk because I don’t have a full work bench to mount one too. I mounted it to an old ikea cabinet I didn’t care about and followed a similar technique as Attempt 1. Fail. I got the grip about 2 inches on and it bent and that was it. Trash. I realized the cabinet wasn’t heavy enough to hold my force of pushing, but the key problem was there was still too much friction while trying to push the grip on.Attempt 3: Success (see pic)I moved the cabinet against the wall so I could push as hard as I could. I moved the vise closer to the grip end. I squeezed the black tip of the grip and rolled it to loosen it up in hopes it would get over the end of the shaft easier. Then I plugged the small opening of the grip with my left index finger and poured solvent into the grip by swirling it around the inner edge. Then I plugged the bigger opening of the grip with my right index finger and tilted the solvent in the grip back and forth while spinning it to completely coat the inside of the grip. Then I removed my left index finger and let the solvent drip onto the double sided tape on the shaft to soak it, catching it in a disposable paint tray. I quickly put on the grip, holding the shaft near the vise with my left had while getting the edge of the grip over the edge of the shaft with my right hand. Once on, I used two hands on the grip to push it straight on, and it went in one motion. I don’t need to twist at all. Then, if needed, just slightly straighten by rotating it.Success! I used this process with no issues for the rest of the clubs.I think the keys were loosening the tip of the grip by squeezing it in different directions and then the thorough coating of the inside of the grip by tilting back and forth is critical.Good luck! I almost returned them swearing the inner diameter was too small, but it’s not.

I love the feel of the grip. It feels soft yet structurally sound. The limited taper really quiets my right hand leading to less shot dispersion. I only use these for my driver. Not that I wouldn't use them for all my clubs, but if I did, I would be replacing grips two to four times a year. They are essentially a luxury grip. Probably similar in both durability and pampering as Winn Dri-Tacs, great grips for the occasional player but not durable enough for the regular player.As for installation, I don't recall having an issue with these. I have only used solvent and double sided tape for installation. I doubt that the compressed air method would work due to the firm core, which I believe is one of this grip's better features.

Been a long time since I have regripped clubs, but still wasn't too difficult to get these grips on. They are easy to align with the club face. The gray color looks really good with black graphite shafts. I'm in Florida so was looking for a grip that is a bit tacky. These met the tacky challenge and are easy on the hands. I'm not saying these are for golfers for arthritis, but they sure feel like they are. Very happy with the purchase.

This grip is a incredible value its nice and soft, it is very tacky and feels to be of decent quality. Ignore the more expensive grips and just get this one i guarantee it will be worth your money

I inherited a golf set. All the clubs were fine except for the putter, whose grip is sticky and deteriorating, making it unplayable. Within a day of ordering this grip and replacing the old one with a golf grip replacing kit, I was out on the green sinking shots. It feels comfortable in the hands and serve its purpose. It's a great deal!

Just placed them on so can’t comment on long term durability. But they are overly tight even when lots and lots of mineral oil. Some of the grips caused the tape to clump up and cause little bumps under the grip. Def use an air compressor is possible. It was a workout.

I wear a large golf glove, so my hands are only a bit bigger than average, but I really like the feel of the jumbo grip. I find I can use a lighter grip pressure both because of the size and stickiness of the grip material. I also really like the shock absorption of the grip material. One thing to bear in mind is that the construction of these grips is similar to a Winn grip. There is a rigid underlisting with the soft grip material wrapped around it. This construction makes these grips a little harder to install because they are not as flexible as a normal grip. I use compressed air to install my grips and I was able to get it on my driver but I had to dip the tip in solvent which I normally don't have to do.

I find these grips great, they have a great feel about them and the grip is non slippery, so great for all weathers, plus the price is very good to.

Excellent grip. Well worth the money. Will review when I play with it in the rain.

use the basic super stroke normally but this one is the next step

Buen agarre y material