JSER CYFPV 90 Degree Up Angled FPV Mini HDMI Male to HDMI Male FPC Flat Cable 20cm Compatible for FPV HDTV Multicopter Aerial Photography

I already have numerous HDMI to HDMI mini cables and was specifically looking for a flat cable for a personal project because a normal cable won't fit.I'm sure this was just an accident but I needed that cable by tonight. This is highly unfortunate..EDIT:I notified Amazon that I received the wrong product and they shipped me the correct cable.Looks/works exactly as described.

as advertised

I needed a short and flexible mini hdmi cable to hdmi to go from my raspberry pi to a little 7" lcd.This looked a perfect solution to my project.But, so it doesn't work right.I have the ribbon cable connected properly with the contacts towards the circuit board on both sides.My screen has two hdmi ports, standard, and mini.But having the mini hdmi side in the screen with the hdmi to a mini hdmi adapter on the pi, nothing happens.Having it reversed with the standard in the screen, and the mini hdmi in the pi, the display comes on for about 10 seconds then does not want to come back on.

I get an initial display when I first boot up my pi with the loading console, but after it tries to log in i get a blank screen. I've tried increasing the HDMI boost in config.txt as well as a few other variables and nothing made it stay on. I've tried other cords and they all work correctly with no issues- even without adjusting any variables or parameters.It seems to be fairly well made. I even checked the solder joints with a multimeter to make sure there were no loose connections and everything seemed good. For whatever reason, though, this cord did not work for my application.

It's a good think I'm not afraid of soldering SMDs, otherwise this would have been a wash. While attempting to troubleshoot the connection, I discovered all but one of the pins on the Mini-HDMI connector lacked enough solder on the pads to properly make a joint. I wasn't planning on buying a DIY kit.

This cable HARDLY works, and when I does, the display will cut in and out. When it does "work", parts of the display is pixelated. I assume this is due to the cable connections being held on by clamp pressure instead of a soldered joint.I can't comment on whether or not audio works through this cable, as I could not get it work long enough to test it out.Don't waste your money.

Was looking for a really small HDMI wiring for a PI touchscreen project. I make no claims for how this cord performs on other systems at this time.Firstly, while this is one of the only mini-HDMI Up Angles out there and may still fit your needs, it doesn't sit flush. When plugged in it goes out a solid 4 millimeters before taking it's turn.Secondly, I was not able to pipe audio through this HDMI cable. Pi can be a bit tricky with that, so it's possible there's a way, but I didn't find it. I was able to get audio through HDMI with several other cord and mini/micro HDMI adapter combinations... but not this one.If you don't need audio through HDMI, and you have room for the extra 4mm this sticks out, this is still one of the more compact solutions for mini-HDMI to HDMI with Up Angle out there.It did seem to pipe 1080p video as expected. 2 stars.

Got this to connect a LCD screen via HDMI but it does not work.The contacts were set in the correct orientation but the screen remained blank sadly.