VANGOLDWall Clock 26"~39",Super Long Warranty 90 Days, Free Replacement Quality Problems;Noble Stylish Oversized Numeral Modern Home for Living Room,Kitchen,Farmhouse,Fireplace(Mirror Silver)

It comes with just enough things for you to customize it to fit your house perfectly 🥰 We made it the smallest size that it came with because of the size of the space we put it in, and chose not to use the foam or the wording; only the acrylic. But that’s just because that’s how we like it ☺️

This clock enhanced my living room and just transformed it into a warm, inviting, and wonderful space. I get a lot of complements on it from everyone.Pros:-great value. Looks more expensive than it actually is.-fairly straightforward set up. It took me about 2 hours.Tip: place them foam on the wall BEFORE placing the shiny part on the foam. If you make a mistake, the shiny part will crack.

So easy to put up and install and looks amazing

It’s super strong and light! I was worried about it staying on the wall but it’s perfect. Sticks on very well, so make sure you do it correctly. We had to fix a few and it was tough to pull it out. The foam makes it look a little cheap but it can’t be seen except from the sides. Instructions were fine! It is hard to align but don’t worry too much, as it looks good and no one can tell if numbers are a few centimeters apart.

As others have mentioned, not the easiest installation but SO worth the effort! Definitely glad I followed the other reviewers' advice to: 1) NOT attach the mirrored pieces to the foam parts until you have them all positioned in their final locations to avoid cracking them (even knowing that I still managed to snap one of them - fortunately near the edge where two roman numerals connect, so not so noticeable), 2) NOT remove all of the paper from the sticky backs of the foam until you are 110% certain they're where you want them and perfectly aligned, and 3) NOT attempt to attach the clock mechanism or the fragile hands onto the base until you're all done with everything else!!! Thank you to the others for the great tips!! Also as others noted, the enclosed alleged "English" instructions barely make sense - grammatically or logically, but I did find the provided paper template helpful in positioning the numbers from the center of the base - although I did need a level, a measuring tape and a second person's opinion to help me with the leveling and spacing of the numbers from one another. I bought the roman numeral version and chose to orient the numbers horizontally, as opposed to circularly as shown in the company's picture. It's only been a week, but so far no issues with the clock keeping time, or with the numbers falling down. Overall, I'm VERY happy I took a risk on such a unique project and extremely happy with how this simple DIY clock makes such an elegant statement while filling my large dining room wall space - see picture for the full effect. If you're pretty handy and more than a little patient, go for it!! :)

I normally just write a very brief review but, in this case, a more descriptive review is warranted. I ordered this product and waited a week prior to opening it, only to discover that some of the 'mirror numbers' were damaged. It is not something that the seller did, but I believe it was damaged during transit/shipping. I have always wanted to create my own clock and this product helped me do just that. This clock is 4 feet wide, we cut a 3/4" wood to a circle, sanded, painted, distress, then seal it. I absolutely love the results. And I must commend the seller for correcting the issues with the damaged numbers. They handled it professionally, & upon sending them a picture of the damaged products, the replacement was sent on the same day. EXCELLENT customer service, and I recommend and will buy from this company again.I noticed that some commented that the numbers they received were not 'mirrored'. Please remember to remove the protective film from the numbers - The glue is extremely strong, make sure you mark exactly where you need to place each one prior to removing & exposing the adhesive. The template that came with the kit is the best thing ever. From start to finish, it took me less than 30 minutes to put the whole thing together. The attached picture is not the best due to lighting, but I am extremely happy with it.I followed the steps & recommendations from others here:1. Mark the center where the clock kit (hands) will go. Use the template. I taped the template in place to keep it from moving.2. Mark where the 12, 3, 6, and the 9 will go.3. Place the 12, 3, 6, & 9 foam numbers in place.4. Repeat the same steps for the remaining numbers.5. Place the mirror numbers only after all the foams are in place6. Remove the protective film from the mirror numbers7. Assemble the clock kit. Note that the clock hands also have protective film. Remove prior to assembly.8. Place the assembled clock kit in the middle. Set the time.Enjoy your masterpiece. Hope this helps.

Works good. Looks good. Wish the clock hands were a little longer. Fills up a big space

Great concept and aesthetics. But after 1.5 hrs aligning everything perfectly on my wall, I found that the clock itself does not work. The installation of the clock body was a giant pain in the neck as I couldn’t snap the hour hand & second hand onto that axis. The clock design is just stupid.

Good price for a big impact on our dining room wall. I thought it was of cheap quality as it came in a small box. But once you start with your DIY, it’s fun and exciting. The laserlike cut outs of the numbers were impressing too. The 3D effect of the wall gives it a classy look. I just hope the clock mechanism lasts, as thats always the case of large wall clocks.

This DIY clock is fairly straightforward to assemble and comes with a ruler/measuring tape, foam numbers, acrylic numbers, and the mechanics of the clock. However it takes time. If you are in the market for a half-day DIY project, this is it. It is nice because you can control the "size" of the clock and even create a minimalist look by taking out some of the numbers. To put the numbers' backing together, it took about 30 minutes, but to assemble the clock and glue and level it properly on the wall, it took me a couple of hours. I feel like the project would go a lot faster with a second person who could tell you how the numbers look from afar.The clock is silent. You need one AA battery (not included). The numbers are about 3" tall and mirrored acrylic. Remember to take off the peel sticker on the front of the numbers, and to measure twice before pressing too hard on the foam stickers on the wall. Watch the Youtube video for instructions, search Vangold faceless clock.

The media could not be loaded.  I love this clock. The only reason I did not give it five stars is because the hardware did not fit properly and I had to Jimmy rig it to make it work. Amazon was very gracious in supporting me with this issue. They refunded me the entire amount so I ordered a second clock and only used the hardware for it. Now it is PERFECT!It is a little time consuming getting it all together, and I highly recommend using the provided ruler spacer thing. The adhesive is extremely strong on the numbers so it is crucial to place it where you want it the first time around, otherwise it will pull off the paint on your wall.Anyways, if you're looking or a elegant looking clock to fill up a large space on your wall, this is the clock you want. I've had so many comments on it, everybody loves it and wants one of their own.

Super easy to put up with the template and it looks gorgeous! Love the black and gold!

It filled the wall with beauty.