Amarine Made 0.75L 125 PSI,Pre-Pressurized Accumulator Tank for Boat,Marine, RV,Caravan

Pour le peu de litre qu il y a sa vaut pas la peine

So this is on our boat. And that said, the boat was neglected before we bought it and I have spent a lot of time fixing what feels like everything and this was one of the first "mods" that I have done. The previous owners did not believe in filtering their water, I swear they used a bucket that had sand in it to fill the potable water...it just feels that way. So after cleaning out every part of the faucets (had to replace one of them) the pressure and volume was good --- but it pulses as the flow rates are low enough that the pump keeps up and cycles. I know how the system works and decided to put in a pressure tank. this one is small and lightweight -- made for an easy install. Once I gained access to the pump area, I cut into the line and was done in less than 2-min. Made a trial run and everything does run smoother.My goal was to make the pump cycle differently and prevent the ups and downs associated with an on demand pump system. Before it was installed the galley sink would noticeably pulse whether on full stream or sprayer. Now... it has a very slight pulse that you can see mainly because you can hear the pump at the same time. It does make the flow more even on either setting.Overall I would say I am happy with it and honestly they should install these from the factory when they built the boat.

Great to have in your RV system. It makes a difference in the water flow, just like advertised. So easy to install and all the parts work with the installation.

My high pressure valve on my RV water heater (six gallon tank) dripped. This occurred at high temperature and a new valve did not correct the issue. The thermal expansion, blocked by the system check valves, was increasing the pressure in the system.Installed this. Charged it to incoming line pressure. The leak/drip has ended.Easy to install.Must be on the pressure (out side) of the pump.

works as it . would be easier to install if it included the fast connectors to the pump, which I had to order seperatly.