Kit, 3 Boxes (Will reline 6 Individual Denture Plates)

THIS IS THE ONLY CRAP SOLD ON AMAZON WHICH IS WORTHY OF YOUR MONEY. BUT I WILL BE RELLY HONEST, THIS WORKS PERFECT FOR 10-14 DAYS, THEN YOU NEED TO BOIL WATER SOAK YOUR DENTURES IN BOILING WATER AND THEN TAKE A WIRE BRUSH AND SCRAP IT OFF AND START OVER. AT LEAST IT WORKS, ALL THE CRAP ONLINE IS A SCAM OR DOESNT WORK. I DON'T KNOW IF THIS PROSOFT IS REALLY COE SOFT. BUT ITS WORTH. I LOVE HOW THEY SELL SINGLE USES OR 6 PACKS OR LARGER OF THIS PRODUCT. ITS WORTHY, BUT MAKE A NOTE OF THIS, AFTER YOU MOLD IT AND SOAK IT IN COLD WATER, GRAB A BOX OF BAKING SODA AND ADD 2 TABLESPOONS TO 2-3 CUPS OF WATER, MAKE SURE ITS COLD AND SOAK FOR MAYBE A HOUR OR TWO, TO GET RID OF THE CHEMICAL TASTE. ALSO THE INSTRUCTIONS SAY TO SOAK IN COLD WATER, COLD DOESNT MEAN TAP COLD, PRIOR TO STARTING YOUR MOLD, GRAB A BOWL AND PUT COLD WATER IE PREFERABLY BOTTLE WATER INTO THE BOWL, MAYBE 20 OZ, THEN ADD A BUNCH OF ICE. STIR, GET IT REALLY COLD, AFTER BOWL OF WATER IS SUPER COOL, THEN APPLY PRODUCT PRO SOFT TO DENTURES, AND START THE TIMER, ITS BETTER IF YOU DO THEM BOTH AT THE SAME TIME. I HAVE ONE FULL UPPER DENTURE AND ONE 90% BOTTOM PARTIAL. BUT IT DOESN'T MATTER. AFTER YUR TIMER SAYS TAKE THEM OUT, PUT THEM IMMEDIATELY IN THE ICE COLD WATER, TAP WATER DOESNT CUT IT, PLUS DO YOU REALLY WANT GOVT METALS FROM TAP WATER SOAKING YOUR DENTURES? NOPE. AFTER THE SUPER COLD WATER DIP, PUT THEM IN, BUT DO NOT BE DISCOURAGED BY THE TASTE OF CHEMICALS, ADD TWO TABLESPOONS OF BAKING SODA TO THE REMAINDER OF THE ICE WATER AND SOAK. FOR A MINIUM OF A HOUR, PREFERABLE MORE. RINSE OFF, AND ENJOY FOR AT LEAST 10 TO 14 DAYS. ALSO LISTEN TO THIS DISABLED VETERAN, THE ONLY DECENT GLUE OR DAILY ADHESIVE IS CALLED SECURE. DON'T WASTE YOUR MONEY ON POLIGRIP OR THE EVERY OTHER MONTH POLIGRIP EXTRA STENGTH CRAP THEY CHANGE THE NAME, I BET ITS THE SAME CHT DIFFERENT BOX CORPORATE AMERICA GREED TRICK. SECURE IS RATHER EXPENSIVE BUT IT SO MUCH MORE EFFECTIVE, IT ORIGINALLY CAME OUT IN EUROPE AND EVENTUALLY GOT TO AMERICA, I HAVE A MONTHY AMAZON SUBSCRIPTION OF SECURE, WHEN YOU USE PROSOFT, ITS VERY SNUG TIGHT FOR A FEW DAYS OR WEEK, BUT THEN YOU NEED TO APPLY SOME MORE GOOP. USE SECURE. ONE LAST NOTE, DO YOU SOAK YOUR DENTURES IN TAP WATER OVERNIGHT? THE SAME TAP WATER WE AMERICANS KNOW IS KILLING US? NOT ME, USE BOTTLE WATER. TO SOAK THOSE DENTURES. AS IF WE NEED MORE METALS IN OUR DENTURES DAILY.

This is about the best consumer-pack soft liner I have found. There was one better IMHO, the clear one of the same brand, but I don't see that anymore.It is a liner material, not a structural material, so if the dentures have an edge toward the gums it can split the liner for example. But if the denture itself is well shaped, this liner is a good and proper cushion. Follow directions and always be prepared to make it thicker than you first think adequate.It will harden with time, even when kept in cleaner solution at night. A bulk pack that allows you to always have an extra on hand to replace it once a month or so is a good thing. To remove the old liner, soak the dentures in hot water a few minutes (I just run the kitchen sink hot on them), grab the edge of the liner and pull. I typically use a butter knife to help with separation and a large pliers for pulling.Sometimes though, the hot water soak can add useful life.

Keeps your teeth in

My teeth I wish I had them, but that’s life. Tried this my upper teeth won’t stay up where they belong. I tried this, but it didn’t work out so good for me, but it was my first time. I’m gonna try it again.

Today marks threes weeks since I first used this product. Unbelievable positive results for me. Like most people, my bottom dentures were the most irritable. PERFECT fit after using Pro-Soft. Get this: Not once after Pro-Soft have I had to use an adhesive on my bottom denture. I just pop it in! It fits great, no movement, comfortable. MOST of the time, I do not use adhesive on the top either. Occasionally if I am going out, I use some powder adhesive on top denture. I really did not appreciate how uncomfortable my dentures were, until using Pro-Soft. I did not have issues with the initial taste. There was a little "different" taste for me, but it was completely gone after day two. Also, I used a sheet of aluminum foil on which to mix and adhere Pro-Soft, so there was no mess afterwards. Some reviewers thought liner was hard. I do not. Some of the other reviewers give expanded/more detailed application tips. I followed these and the enclosed instructions exactly. I am amazed at how well this product worked for me. My dentures are now more comfortable than they have ever been. Follow the instructions! Enjoy comfortable dentures!!

THIS PRODUCT IS NOT NEW TO ME:I have been using "ProSoft" for SEVERAL YEARS, and it was great. But now, it appears they have changed the quantities of powder/liquids one receives; and, there is only enough product to reline either the bottom or the top plate, but not both, (well maybe a true professional could do both???) Further, like other reviewers have stated, the mix of powder to catalyst sets up prematurely. Even with fast work, "mixing in less than15 seconds time,) by then, it has already begun to set, (there is no Honey like consistency); it is no longer fluid, it's a paste. Consequently it's rather like icing a cake, and I get voids in the final liner. (BTW, my dentures are rather smaller than larger.) I am sorry tow write, and it is only my opinion, but it appears ProSoft is trying to make more $$ by supplying a quantity that will only coat one denture plate per kit, (if you are really fast.) It means, for me the cost of ProSoft exceeds the cost of other denture recliners like "Reline-it. BTW, I contacted ProSoft about the problems I have encountered with their product... do you know what they said?..............Yeah you guessed it, NO RESPONSE.I hope you are more successful than I have been with the last 3 reline kits. I give it a 1 star for, what appears to be a marketing strategy, to what end? The almighty $$$$ I mean you know it's covid right?????Good luck.