RAM Mounts RAM-B-309-1U Motorcycle Brake/Clutch Reservoir Ball Base with B Size 1" Ball

Don’t let this installation intimidate you. It’s the most sturdy, secure connection you can make. All you do is remove the two screws one at a time from your reservoir while holding it in place right where it is, then find the right bolts from the included replacement bolts and reattach with the ball mount in place. Tighten well, enjoy. Allen wrench screws which are to me much more secure and don’t strip easily. But don’t use a cheap Allen wrench that will crumble under use because the original screws are in there very tight. Just be patient and have a well fitting Allen wrench with sharp corners on it. This is Honda Goldwing Trike Rider approved and certified (me)

This mounted up ok and feels solid, after I went to the hardware store and bought some stainless washers and zinc plated steel bushings that fit the size needed. I used the 1/2" L X 1/4" ID steel bushings backed up with some #12 stainless steel washers that I put under the lock washer at the screw head and on the other side of the mount body for the steel bushing to press against. The holes in the mount body are a sloppy fit for the supplied screw head and lock washers. The supplied plastic bushings don't properly fit the OEM handle bar clamp or the Ram Mount screw holes. The steel bushing I bought was the same OD as the OEM screw head that held the master cylinder to the handlebar. That made a perfect fit to the handlebar clamp so a washer etc. was not needed at that end. Bottom line, it will do the job nicely, just needs a little extra in the hardware department.

I bought this because there weren't many options that would work well with my Continental GT 650's factory clip ons. This was easy to install and works perfectly for mounting my phone with a ram mount arm. The best thing about it is when you're not using it for holding your phone or GPS, it doesn't stick out and ruin the look of your bike

Solid mount but the bolts that came with it didnt work with my crf 125f clutch mount. had to use some other bolts that came with my seat strap. lined up great though worked just fine.

Easy to install. Just remove both bolts at the same time. Good sturdy piece. Great price.

Fits my Harley

All my Ram purchases have been really good quality. I'm very happy with it.

This is another perfect addition to my RAM mounting systems. It's well made, heavy duty, and easy to use. Fast Delivery too!