🔥 Keep Your Cool, Game On!
The GDSTIME 120mm x 120mm x 25mm Brushless DC Cooling Exhaust Fan is engineered for high performance with a rated speed of 2500 RPM, delivering 83.2 CFM of airflow while maintaining a low noise level of 35.7 dBA. Its dual ball bearing design ensures longevity, making it an ideal choice for desktops, laptops, and gaming consoles. With a voltage range of 5.5V to 13.8V, this fan is versatile and efficient, perfect for any cooling needs.
R**N
Works well
Inexpensive, quick install, silent!
E**L
Works Great
Quiet and works exactly like the original as a replacement cooling fan in my Xantrex Freedom 458 RV Inverter/Charger .
R**S
Worked in Opal 2.0 ice maker
This was my last ditch effort to fix our GE Opal 2.0 icemaker for the 5th time it seems. The old original fan still worked, but very hot air was coming out the back IMO. The ice maker would run for hours barely making ice, and frequently defrosting itself. Dust on the heat exchange radiator was not the problem. To see if it was overheating, I placed a small fan against the side of the unit, and I noticed it would make ice normally. I could not measure the RPM/airflow on the old fan, so I tried this new fan just for the heck of it. The airflow it creates is considerably stronger than the original 12v/.25a fan. The new fan is a tiny bit louder, but not very noticable over the compressor noise anyway. Our ice maker is back to cranking out ice, and seems almost better than when it was new.The only small caveat was the small 2 pin connector plug seemed to have a slightly different clip style on the new fan. I was able to plug it in, but not really click it securely in place.
C**S
Faible consommation
Un peut bruyant mais il fait bien son travail, reste a voir a long terme. Très peux gourmand en énergie. Il va me servir au transfert de chaleur en hivers dans mon entrepôt de batterie de systèmes solaires.
D**.
An inexpensive quick fan fix!
The fan on my GE Opal 2 icemaker died. Purchased this based on being the Amazon Choice. I installed the fan in about 15 minutes. I spliced the wires and capped them instead of taking the entire frame off the icemaker to get to the housing where the plug is in my model. Fan is louder than the stock fan. You can here it over the compressor when standing near the ice maker, but it's nothing given the noise when making ice and it is not noticeable over the compressor after six feet from the ice maker. It seems more powerful than the stock fan which might account for the sound. The ice production is like it was new or better than new in terms of speed.
ترست بايلوت
منذ 3 أيام
منذ 4 أيام