SkinomiTechSkin [6-Pack] (Slim Design) Clear Screen Protector for Apple Watch Series 4 (44mm) Anti-Bubble HD TPU Film

Ordered one for my wife's 40mm and my 44 mm new Apple Watches. Relatively easy to put on. However, the 44mm sheet of 3 skins had a visible straight-line scratch across all the screens, which I'm assuming occurred during manufacture. So, I ended-up installing 4 protectors on my watch, as I figured it wasn't on the entire sheet and went through all 3 (and got pretty good at installation). Overall, the installation was pretty easy, but I needed to continue to press on the curved edges and corners for a while in order to make it fully adhere (I did so about every 15-minutes for a hour or so after installation). This is noted in the installation instructions. So far (a few weeks), they are staying in place along the curves and edges. I initially noticed that the protector material scuffed pretty easily, and I don't think those "scuff marks" would have shown-up on the actual watch face if there was no protector on it. So I called Skinomi Support and the representative was very helpful. When I told her about the straight-line scratches on all of the protectors on one sheet, she immediately said she would send me a replacement kit so I would have it “just in case” (received it yesterday). When I told her about the scuff-marks, she told that in most cases, they will disappear in a few days. Obviously I was very skeptical since after 1-day, the marks were still there and relatively severe. However, a couple of days later, the scuff-marks were completely gone, and remain so after a few weeks. That was is pretty amazing, as the main scuff mark was quite large and noticeable. The bottom line for me is that the protectors are fairly easy to put on as long as you follow directions and continue to press down the edges and corners for a while after getting the protector in place. Plus, Skinomi’s Customer Support is outstanding backing-up their product and answering questions. Very satisfied!

I used the same brand screen protectors on my pebble time steel for years, and they were great. I assumed this would be true for my new Apple Watch - I was wrong.Application was as expected. At first the sceeen seemed to hug the rounded edges of the Apple Watch just fine. Then, randomly the whole screen protector released after a couple days. The edges also don’t stay down very well. Worst of all, I haven’t been that active yet - no running or extended exercising has led to screen protector release.Overall, I’m very disappointed. The search for a better screen protector continues.Update: after a few weeks of use, corners are failing. An example is posted. I foresee this happening often.

I have to be honest, this product failed to meet my needs. First thing is any screen protector should not need several hours to "Set up" after its installed before its ready. Even after I waited the time, it appeared no matter what part of my clothing caught the edge of my 44mm watch screen, it caused the edge to peel back. It was almost as if there is not enough adhesive to keep the protector on the screen. No matter how clean it was, and installed on a brand new watch straight outta the box, it still had issues. No wonder why you get 6 of them. To add to that, don't use this screen protector with a soft TPU bumper, as the bumper will shift around and catch the edge of the protector and cause it to peel up. Maybe it would work with a hard TPU case instead. I tried 4 of the screen protectors and each one gave me the same result. Sure I have installed many screen protectors on previous phones. I buy two brands and they work perfectly. Normally they are sold 1-2 in a box. Why send 6 watch protectors? Is it because they don't hold up as well, or they don't last, and get damaged easily? Sure I got them on evenly, no bubbles, and not even a hint there was a screen there, until a day or two later. I own the series 4, 44mm stainless with the link band. I ultimately bought a TPU case with a built in screen protector. I gave it two stars only because the product was packaged well, and provided a lot of bells and whistles, where in the end it performed poorly. Not many 44mm series 4 stuff is out there yet, and I needed to make sure I had protection upon its arrival. Eventually manufacturers of aftermarket accessories will take note of these reviews and move forward with fixing issues.....

I was super excited to get this screen protector for my daughter’s apple watch. The watch isn’t cheap and should be taken care of and my daughter isn’t known for taking care of things. I liked what I read about the low profile of this protector and the ease of putting it on. It did not disappoint. We were excited to put it on, and the instructions suggested to put the protector on in the evening so that it could sit overnight. We followed these instructions. In fact, all of the instructions were wonderful. Not only were there written step by step instructions, but there is also a video one can watch. I’m impressed. The company offers a warranty and customer service via email or phone. I don’t get that kind of customer service anywhere! Also, they sent 6 protectors. Anyway, we followed the instructions to a “t” and found them very easy to follow. We had a fun time! This morning, the protector looks great and unless you are really looking, you can’t even see it, which is exactly what we were looking for.I’m happy with this product and would certainly order again.

Its good

Come dal titolo ero convinto che la pellicola coprisse la quasi toatalità del vetro dell'Apple Watch da 44 mm.Sembra più un riadatamento delle skin per i precedenti modelli di Apple Watch da 42 mm. Infatti rimangono scoperti circa 3 mm di bordo del vetro.Sono sempre stato estimatore della Skinomi e con il precedente Apple Watch ero molto contento del lavoro svolto dalle loro pellicole......ma in questo caso non posso dire la stessa cosa.Speriamo che nei prossimi mesi aggiustino le misure e riescano a coprire effettivamente tutto il vetro dell'Apple Watch 44 m.

Ich kann die positiven Rezensionen nicht nachvollziehen und frage mich mal wieder wie viele Rezensionen hier gekauft sind, trotz authentifizierter Käufe.Mehrere Produkte habe ich jetzt für die Apple Watch ausprobiert und noch keines gefunden, das ansatzweise die Qualität wie bei meinem iPhone bietet. Der Hersteller meines iPhone Schutzglases bietet leider keine Apple Watch Schutzgläser an.Die Folie lässt sich nicht passgenau anbringen, der Folien Rand löst sich auf Grund der Wölbung immer wieder.Die Folie erweckt auch nicht den Eindruck wie bei einem Panzerglas einem starken Stoß oder Ähnlichem stand zu halten.Artikel wurde bereits zurück geschickt.

Das ist die beste Folie für die Apple Watch. Ich hatte die bereits für die Series 3 und war begeistertUnd bei der Series 4 bekomme ich wieder die gleiche Qualität.Ich habe die Folie in 5 min am morgen aufgebracht. Und nach 3 Tagen waren alle blasen wirklich weg. Habe damit nicht gerechnet, da echt große blasen drunter waren.Hab mich halt NICHT an die Anleitung gehalten. Nass gemacht und drauf, kurz gewartet Ränder runter und dann habe ich die Uhr wieder getragen. Aber die Blasen gingen dann weg.Super...Sieht top aus und stört kein bisschen beim bedienen. Würde ich jederzeit wieder kaufen. Aber bei 6 Folien brauche in der Packung brauch ich bestimmt eine neue bei der Series 6 :D

Ich wollte für meine Apple Watch 4 44mm einen Schutz haben was gut hält und kaum sichtbar ist. So habe ich von einer anderen Marke im Internet GL.... den 3D Vollschutz gekauft für 25€ was einfach nur Geldverschwendung war weil es nicht Blasenfrei anzubringen war.Danach habe ich mich nach Folien umgeschaut und diese hier entdeckt und bei dem Preis war ich skeptisch ob das was werden kann. Trotzdem habe ich es dann gekauft und am nächsten Tag sofort getestet. Nach dem anschauen des Videos sofort losgelegt leider hat die erste Folie nicht bei mit gut funktioniert aber dafür bestens bei der zweiten.Für jeden der seine AW 4 44mm schützen will kann ich diese Folie empfehlen auch wenn das anbringen am Anfang etwas knifflig ist.