GVS Filter Technology SPR405 Elipse Integra Safety Goggle + P3 Dust and Nuisance Odour Half Mask Respirator, Filters Ready Fitted, M/L

The media could not be loaded. I found this mask relatively easy to fit, the tiles were a little difficult to pull to the right level of tightness but I think that was more to do with me thinking they’d snap it I exerted too much force on them.The straps didn’t snap, in fact they feel very secure. Once fitted the mask provides a tight fit - getting the balance right between a good seal & comfort takes time but it is achievable.Most importantly - it didn’t fog up. I needed to do some work in the loft and did so without any issues with the mask. I wrote it for around 20 minutes, even if I wasn’t finished at that time I would’ve needed a break from mask wearing but that would apply to any fitted mask.I found breathing to be very easy, I didn’t feel restricted at all. Note that we’re all wearing face masks I’m aware of the suffocating feeling you can have after a length of time but this one, with having filters, allows you to breath naturally.

I got this product to provide a bit of protection to me while airbrushing. I possibly didnt need the mask element but felt there was no harm in being a little over the top when it comes to respiratory or indeed eye protection.The mask fits well and was easily adjusted to fit my face. It is comfortable enough to wear, and doesnt give me any reason to doubt that it doesnt perform as expected (although i dont have the facilities to actually test that). I was a bit worried that the google element would steam up, but it wasnt an issue that occured while i was using it.My only slight criticism, would be that once tightened the straps dont have anything to hold them in place so the tend to flop around which can be a little annoying. Other than that, no issues at all.

Really like the half mask but this model isn't the best, the fitment is too tight on the goggles and becomes uncomfortable after 10mins feels like it's squishing your face and makes your face tired trying to resist the mask .The inside bracket around the noise presses against your skin and is also uncomfortable, it also fogs up especially when working hard,Buy the normal mask and a good sperate pair of goggles or a proper full face resperator

This is generally a very well made, lightweight mask for a wide range of jobs. I've included a number of photos which I hope you find helpful.It's very comfortable on the face with good adjustable straps, especially the top ones which are easy to tighten whilst wearing. I found there was no major steaming up issues of the lenses which will be helped massively by the small vents above the lense on the forehead.There is a faint rubber-type smell when wearing it, but it's not horrendous and certainly bearable. Also on the inside is a twist lock on either side that when twisted, enables the filter cage to open out so that you can remove the white filters if you need to.Please note that if you wear glasses I don't think this mask will work for you. Wearing my glasses, I couldn't get a good seal and there was an uncomfortable pressure applied to the bridge of my nose. If you need vision correction, best wear contact lenses if wearing this.

The mask looks well constructed and the two head straps are wide and easy pull adjustment.I wear glasses and found that the mask just about accommodated for these without any discomfort or steaming up.BUT...I can't help thinking there are two reasons why my glasses didn't steam up. The first being there was a small gap around the temple area of the mask and a further gap underneath my chin there the mask didn't form a full seal.Therefore for these reasons I dropped 2 stars. Yes I was wearing glasses but I still expect a proper seal around the bottom of the mask.

Just moved into a house which has brickwork with classic lime mortar and the dust from that when mixing or removing it is not good for your lungs.Only used it while removing one blown brick as an experiment to see how difficult it was.Not a bad fit and hopefully it will keep me safe re pointing other areas of the house exterior.

For £45, you'll get a light, solid quality mask and safety goggle set that does the job. I got this for my husband who likes to tinker around in his workshop which involves woodwork and spray painting. His previous mask was starting to wear out (he’s had it for a long time) so I thought this would be a good replacement as it had a generally favourable rating.He said it fits him well and, most importantly, that it works without fogging up the glasses.So, all in all, my husband is fairly satisfied with this safety goggle and finds that the price to quality ratio is reasonable. As a result, I am more than happy to give this a positive rating.Let me know if you found the review helpful. Thanks.

This half mask respirator and goggles does offer some protection from dust etc but I didn't find it particularly comfortable to wear and unfortunately,the safety goggles part of it steams up,during usage making it difficult to see.Furthermore,the adjustable straps are not very good quality and I am concerned about their longevity.Luckily,I got this product as complimentary issue from the Amazon Vine scheme,if I had to pay for it I would be feeling fairly sore about it,to be honest.Can't really recommend this.

Ware in Ordnung

Die Maske ist viel zu klein, trotz der Größe L, sieht eher aus wie ein Spielzeug, passt somit auch nicht wirklich gut, das Sichtfeld ist absolut eingeschränkt, noch dazu hängen einem ständig diese Bänder im Sichtfeld rum, absolut nervig. Die Brille beschlägt innerhalb weniger Minuten, ausziehen der Brille und saubermachen, geht leider nicht, ist ja fest verbunden mit der Maske, steht man also in einem staubigen Raum, muss man die Arbeit niederlegen und den Raum verlassen um die Brille zu reinigen. Lektion gelernt, nie wieder eine Maske mit fester Brille kaufen! Würde das Gespannt am liebsten zurückgeben, jedoch habe ich es bereits benutzt. Falls jemand vor hat in einer staubigen Umgebung zu arbeit, dann besser diesen Filter mit Maske NICHT kaufen!

Maske fällt klein aus, Passform ist schlecht. Beschlägt sehr schnell und hält auch nicht dicht. Rausgeschmissenes Geld. Nicht kaufen!

Die Maske funktioniert eigentlich recht gut. Das nützt aber nichts, wenn bereits beim zweiten Gebrauch die Halterung des Spanngummis abbricht, ohne jede Belastung. Einfach so. Das Teil ist viel zu schwach ausgelegt.