-Valve material: Aluminum alloy -Valve total length: 40 mm -Valve color: Anodized red /black -Valve weight:9g -SALE UNIT:1 Pair Valve features: - 1 valve includes: 1 x valve stem and 1x valve core + 1 x O-ring + 1 x lock nut + 1 x valve cap - Anodized aluminum alloy Presta valve (French valve), ultra light weight, anti-rust. - Round valve end, wrapped with rubber, suitable with most tubeless ready rim on the market. - Delivered with lock nut to secure the valve on the rim and ensure optimum seal between rim and valve. - Rubber O-ring is also delivered with the lock nut, place the O-ring under the lock nut. Protect your tubeless rim from scratches while tightening the lock nut. - Valve core can be removed. Allow installation of valve extender or inject tubeless sealant.
N**N
Arrived faulty
Once fitted and made fully functional these valves worked, however it was only after fitting them and fitting some very tight tyres and then attempting to seat the tyres, by inflating them, that I discovered one of the valves was faulty with the rubber part that seals onto the wheel rim not having a hole all the way through and was just a depression about 5mm deep.Seeing as I had no other valves to fall back on and needed the tyres fitted for a weekend trip, the only choice I had was to drill out the rubber that blocked the valve. Once that was done the valves worked faultlessly, but a bit of a disappointment that they arrived with a fault which required engineering skill to correct.
S**T
Not the best and not the worst
Not the greatest for tyres needing higher pressures. The rubber washer that is supposed to seat under the securing nut is a poor fit and as the nut is tightened part of the washer is pushed out from the nut to leave a gap. I couldn't get the valve to seat tightly enough on my wheels and lost pressure after a few minutes. May be okay for an MTB where lower pressures are used.
M**O
Failed long term
Fitted, sealed eventually, but ultimately the valves have failed. Purchased 2 sets and both have failed in both wheel-sets.Ran them for just a couple of rides but left the bike for a few weeks and will no longer hold air when re-inflated.Have experience with tubeless set up, purchased due to speed of delivery.
M**E
Not worth the time
Very cheap quality. I never could get a seal and had to return them. The collar that came with them either stripped its threads or had so much play that it would slide down the valve.
M**.
Good value, working fine so far.
All good. Converted two wheels, no problems thus far.
A**R
Poor quality
Valve stem snapped while pumping up the tyre. Thank God I wasn't riding
B**Z
does the job
Good quality for the money
C**O
Simple value buy
Exactly as described, good quality for the price so decent value. These were the second set for converting to tubeless. Installation was straightforward and holding up well
Trustpilot
3 weeks ago
2 weeks ago
