I350-2T

ESXi 8.0u3をインストールするために購入しました。 問題無くインストール完了し、順調に稼働しています。

HP ProDesk 600 G5(G6) Small Form Factor PCにNIC2枚差しで、VMwareからDLしたISOimageを利用して、そのままインストールしたところ、問題なく認識されて起動しました。 4ポート構成にすることで、NSX-Tを冗長化構成で組めるようになるので重宝しています。 各世代（ESXi6,7,8）のESXiをインストールしましたが、どのバージョンでも認識しています。 ホームラボ環境を持っている方は、ESXi6.7、ESXi7.0、ESXi8.0と3世代に渡り利用できるNICなので最高です。10GNICが欲しいところですが検証としては1GNICでも十分です。 ◆ESXi7.0U3LのNIC状態 [root@esxi22:~] esxcli system version get Product: VMware ESXi Version: 7.0.3 Build: Releasebuild-21424296 Update: 3 Patch: 85 [root@esxi22:~] [root@esxi22:~] esxcli network nic list Name PCI Device Driver Admin Status Link Status Speed Duplex MAC Address MTU Description ------ ------------ ------ ------------ ----------- ----- ------ ----------------- ---- ----------- vmnic0 0000:00:1f.6 ne1000 Up Up 1000 Full e8:d8:d1:ba:8c:fb 1500 Intel Corporation Ethernet Connection (7) I219-LM vmnic1 0000:01:00.0 igbn Up Up 1000 Full 80:61:5f:17:01:50 1500 Intel Corporation I350 Gigabit Network Connection vmnic2 0000:01:00.1 igbn Up Up 1000 Full 80:61:5f:17:01:51 1500 Intel Corporation I350 Gigabit Network Connection [root@esxi22:~] ◆ESXi8.0BのNICの状態 [root@esxi22:~] esxcli system version get Product: VMware ESXi Version: 8.0.0 Build: Releasebuild-21203435 Update: 0 Patch: 20 [root@esxi22:~] [root@esxi22:~] esxcli network nic list Name PCI Device Driver Admin Status Link Status Speed Duplex MAC Address MTU Description ------ ------------ ------ ------------ ----------- ----- ------ ----------------- ---- ----------- vmnic0 0000:00:1f.6 ne1000 Up Up 1000 Full e8:d8:d1:ba:8c:fb 1500 Intel Corporation Ethernet Connection (7) I219-LM vmnic1 0000:01:00.0 igbn Up Up 1000 Full 80:61:5f:17:01:50 1500 Intel Corporation I350 Gigabit Network Connection vmnic2 0000:01:00.1 igbn Up Up 1000 Full 80:61:5f:17:01:51 1500 Intel Corporation I350 Gigabit Network Connection [root@esxi22:~]

5TB/dayのペースで通信するサーバに取り付けて1ヶ月以上経ちますが今のところ問題ないです

非常に安定しています。 価格もそれなりに高いですが、信頼性の対価としては安いと感じます

When building a Linux system the last thing you want to deal with is weird drivers. So I always look for Intel or Broadcom chipsets in ethernet cards. Intel chipsets in particular are pretty much guaranteed to work. Most of the servers I build have Intel I350 ethernet cards for a reason. They're fast, reliable, and use the rock-solid "igb" driver that you can be absolutely certain will be included in the stock kernel from any Linux distribution The I350 controller chip has been in production since 2011 and Intel plans to manufacture it through 2031. It's fast, reliable, inexpensive, and uses only 2.8W of power. Those features, combined with the high availability of the chip has made it ubiquitous on server motherboards. As a result it's extremely well supported by any operating system you might want to use. Thie PCI interface on the card identifies itself as being built by Beijing Sinead Technology Co. The ethernet MAC address has the correct prefix (98:b7:85) for Shenzhen 10Gtek Transceivers, which matches the name of the seller on Amazon. That's always a good sign; they're using properly assigned MAC addresses rather than just cloning some other card. The card appears to be identical to the I350 cards sold by Intel. The only difference is the price, which is less than half what Intel charges. I'll probably buy more of these in the future. Great pricing and like the other 10Gtek products I've purchased in the past it's a solid product.

usata su un host esx 7 per sostituire la vecchia non più compatibile. alla pari della scheda intel, quindi ottima.

Muy buena calidad. Apta para transmissión de imágenes para controles en alta velocidad.

ras : parfait , reconnue sous msi z690-a ,parfait pour du boot pxe vue que la carte reseau de la msi z690-a ne supporte pas .. merci !

the I350 card does not work well with hp servers (fans spin very quickly once inserted). the 4 port alternative of the same chipset works fine though... very strange.