About The Application We have had many requests to make a section available for this application. This mesh is used for the sifting or sieving of fine particles. To achieve the best results simply build a wooden frame to keep the mesh rigid and place the material on top of the mesh. This will sift through the sub - 250 micron particles as required. About The Product This is a farily tough mesh with a tight weave. It is easy to cut with kitchen scissors. #60 is a straightforward mesh to produce, and it is rather an industry staple. Consequently it is affordable to the end user. It is less than 1kg per m2 so it isn't especially heavy. Plain Weave Plain weave woven wire cloth is used for the majority of wire cloth woven by The Mesh Company. Each warp wire crosses alternately above and below every weft wire and vice versa. Warp and weft wires are normally of the same diameter. Plain weaves are used for the majority of commercial applications and for filtration where a high flow rate is required. Metal Grade 304 is the industry standard woven wire mesh stainless steel grade. SS304 has a good oxidation resistance at roughly 870°C to 925°C depending on use and environment. We recommend 316 if you require a higher resistance to heat. SS304 can be used for many applications. It is often found in kitchens, wine and beer making equipment, chemical containers, architectural panels and quarry screens. Composition - C 0.08, Mn 2.0, Si 0.75, P 0.045, S 0.030, Cr 20.0, Ni 10.5, N 0.10 SS304 also has outstanding forming and welding characteristics. Cutting This material can easily be cut with kitchen scissors. If you have stronger tools then these will work also. When we are cutting this product in our factory we would use standard issue kitchen scissors as they give an accurate cut. As a responsible supplier we always advocate the use of safety goggles if you have them.
Trustpilot
1 month ago
1 week ago
