Goplus Folding Platform Truck Heavy Duty Portable 4-Wheel Dolly Cart, Height and Length Adjustable, 330-lb Capacity, Silver

To start, this little cart is a great time saver, and one of the best features about it is it's adjustable length. Ergonomics are nice with a rubber coated handle and fairly light weight. There is a weight limit, and I wouldn't recommend it for transporting small, loose items, but in the shortest position it fits 13" x 11" x 10" in "grocery" totes nicely. Pull out the extension by releasing the little clip holding it in place, and you can stack another one next to it with some room to spare. Durability is good so far, no issues. Let us start at the beginning. The cart arrives in a box, fully assembled minus the wheels (4x) which are attached with Phillips-headed bolts and nuts (16 ea). To assemble you unfold the cart, you simply pull the handles up, exposing the mounting holes. These are a standard mounting pattern, and you can replace the hard rubber wheels with some that are are little softer from Home Depot or Amazon. You need a #2 Phillips and either a wrench or a socket set to complete assembly. Assembly is simple, you stage the wheels (they only fit one direction and are casters), thread the bolt through the hole from the top, hold in place with the phillips, and torque with the wrench or the socket until tight. Repeat four times and your done.My biggest complaint is that the tab that holds the bed in the "short" position can come loose after some use, but it’s easy to tighten. Oh, and to fold down the handle, unlike many other carts, you fold the handle by pressing down on the silver steel back panel. That will drop the rubber-coated telescoping handle down like a suitcase, and fold the entire assembly forward.

The Goplus Folding Platform Truck Heavy Duty Portable 4-Wheel Dolly Cart is really sturdy and some what light weight for a woman to carry when folded up. It would have been nice if it came with a set of instructions. Just make sure that you have a philips head screwdriver and pliers. It may take two people to assemble. I know I could have used an extra set of hands. One to hold the blot tight and one to turn the philips head.

I bought this to hold our mail bins. I wanted something that could fit under the counter and hold the full mail bins so that my mailroom gal wouldn't have to lift the full totes. This works great. The adjustable size allows it to collapse down to fit under the counter, and then easily expands to make moving it easier. The fact that the bottom also expands is an added benefit that allows us to use it for more purposes than what I bought it for. The only thing I would change would be to allow the handle to tilt back so it would be easier to push, but that would add more moving parts and more chance for something to break. I'll add some pictures of it holding the mail bins fully collapsed, and fully expanded so you can see the difference.

I use this cart to haul my boxes and bins to and from my car at the farmer's markets and fairs I sell at. It rolls really well and I can fit a lot of stuff on it. My ONLY issue, and hence the 4 instead of 5 stars, is when I try to fold down the handle. It's really touchy and while that's great when you don't want it to fold down, it's really difficult to actally get it to collapse and fold flat. My teenage daughter helps me run the stands and she has never been able to get it to fold down... I have to do it or it goes in the car as is. All in all, I would still buy it again.

I have one of the Costco hand truck that converts into a cart , but I’m 6’2 and the handle is so low and not adjustable, but this cart is great the handle adjust to accommodate your height and the platform of cart extends to accommodate all sizes of boxes or items I’m living it .

This cart was to replace an almost identical cart that I have had and used for over 20 years. The base on the new cart is a few inches shorter than the old one. One of the two fixed wheels on the new cart has a problem that causes the actual tire to have a noticeable tilt. The bracket/flange that holds the tire in place has two holes for a bolt/axel to pass through. These two holes are a bit off set from each other that causes the bolt/axel to not be horizontal. Since the bolt /axel is not horizontal, the tire has the noticeable tilt. I notified the vendor initially who either did not understand the problem or they just don't have the necessary part to correct the problem as they just sent a new tire. A second communication restating the problem has yielded no response in over a month. Though very similar the old cart parts are just off enough to not work on the new cart.

I feed calves and need to move 50# bags of milk powder. This little cart is my best purchase of the year for reducing back stress-extended it carried 2- 50# bags perfectly. its small size lets me park it where 2 bags of replacer would normally sit so there is no impact on my work area. The handle has some movement but is sturdy.

The handle eventually broke (only used about 5 times) as it does not stay up. Very disappointed and you can't cart any heavy weight on it (though I was just transporting bins of lightweight glassware). Basically, it's just not strong enough and the handle is shoddy.